RSS

All About Fishing Equipment

10 Nov

The more we know and understand about our fishing equipment, the better prepared we are when it comes time to rely on it. This insight also allows us to make informed buying decisions.

Here is some advice for getting a handle on baitcast reels, electric trolling motors, and drift socks.

Narrowing Down Gear Ratios
Bait Baitcaster_Combocast reels are designed to provide either power or speed. Since we face multiple scenarios throughout a day of fishing, uncovering the facts on gears can make our life on the water much easier and more productive.

An example of a gear ratio is 6.4:1. The last number represents one complete turn of the reel handle — the first describes how many times the spool rotates. In this case, it’s 6.4 spool revolutions for each crank of the handle.

High gear ratios (7.1:1) are built for speed. Line can be retrieved quickly and efficiently. A reel of this style works best for fast presentations, such as burning spinnerbaits and lipless crankbaits, or when working areas that require quick pitches or flips to specific spots, such as docks, cane or weed clumps.

Consider the fishing techniques you will be using when deciding on the best gear ratio — 6.4:1 is a great “everyday” reel configuration.

Low gear ratios (5.4:1) signify power. Effort and line retrieval are greatly reduced when reeling, making it a good choice when tossing high resistance lures, namely deep diving crankbaits or oversized spinnerbaits. Swimbaits are another application that can be worked more effectively with a lower gear ratio reel.

A baitcast reel sporting a ratio of 6.4:1 is your best bet for reaping the rewards of both power and speed. It’s the “all purpose” model in the baitcast world.

For a fine assortment of Bait cast Reels, CLICK HERE

217315_tsA Matter Of Thrust
When it comes to electric trolling motors, thrust is defined as: “The power rating of an electric trolling motor that is measured in pounds.”

A trolling motor is an indispensable piece of equipment for those serious about fishing. Choose the wrong “thrust,” however, and you might as well be treading water.

Here are five simple rules for narrowing down the correct thrust:

1. You will need a minimum of five pounds of thrust for every 350 pounds of load. This latter figure includes boat, equipment, gas, and people.

Choose the most thrust that you can afford — it will definitely save you money over the long haul.

2. A boat measuring 14 feet in length requires 32 pounds of minimum motor thrust under “normal” fishing situations; that jumps to 55 pounds of thrust for an 18-foot boat.

3. Those who fish in adverse conditions — big water, high winds, heavy vegetation, long hours — should choose a thrust rating considerably higher than those recommended.

4. Buy as much power as you can afford — within reason. Lowering speed/power is always possible with a high-thrust motor — upgrading power on an undersized unit is not.

5. Don’t cut corners. A higher thrust motor may cost more initially, but the extended life (no need to upgrade) and lack of frustrations are definitely priceless.

For a fine assortment of Electric Trolling Motors, CLICK HERE


Drift Socks — One Size Doesn’t Fit All
A drift sock is a large, oval shaped “sock” that is lowered over the side of the boat in order to slow speed, and effectively work structure areas. It is a must for walleye anglers and flats fishermen. But for anyone that abhors the thought of fishing in the wind, the drift sock is a definite savior!

Drift socks should be part of the arsenal for all walleye anglers.

When it comes to choosing a sock, keep in mind some recommendations for size:

* Boats to 14 feet long — 26 inches

* Boats to 16 feet — 30 inches

* Boats 14- to 18 feet — 38 inches

* Boats 16- to 22 feet — 44 inches or 48 inches

* Boats 18- to 22 feet — 56 inches

drift-sock-258x300Much like I mentioned with the trolling motors, it is best to upgrade one sock size to give you that extra slowing power you may need, especially if you work the boat in high winds or areas with strong current.

Another bit of advice is to purchase two drift socks for the boat. These can be useful when the wind is really blowing, and with one tied to the bow and one on the stern, drift control can be better managed and adjusted.

Choose a sock that is manufactured from reinforced nylon — it will stand up to the abuse, and not leave you “stranded” on a blustery afternoon.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 
Leave a comment

Posted by on November 10, 2013 in Boating, Fishing Equipment, Fishing TIPS

 

Tags: , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: