RSS

Monthly Archives: April 2014

Herb-Crusted Walleye

herb
This is a quick and easy dinner solution that is a big hit at the table. You can use perch, walleye, tilapia, and probably any other kind of fish you’d like.

I find that everyone likes certain tastes, so feel free to spice it up however you like.

I will sometimes add more of the ingredients on top of the fish before putting in the oven for more flavor.

READY IN – 35 mins

Makes 4 servings

1/2 cup butter

2/3 cup finely crushed saltine crackers

1/4 cup grated Parmesan cheese (optional)

1/2 teaspoon dried oregano

1/2 teaspoon dried basil

1/2 teaspoon salt

1 pound walleye fillets

146630

Directions

  1. Preheat oven to 350 degrees F (175 degrees C). Place butter in a 9×13-inch baking dish and melt butter in the oven while it heats.
  2. Mix crushed crackers, Parmesan cheese, oregano, basil, salt, and garlic powder in a shallow bowl. Remove baking dish from oven and dip walleye fillets into butter; gently press fillets into crumb mixture to coat both sides of each fillet. Lay the breaded fillets into the baking dish.
  3. Bake in the preheated oven until fish is opaque and flakes easily, 25 to 30 minutes.
  • PREP 10 mins
  • COOK 25 mins
  • READY IN 35 mins

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

Tags: , , ,

CATCH – PHOTO & RELEASE

40%20inch%20pike%2009Catch Photo & Release Catch and release is a practice within recreational angling intended as a act of conservation. After a fish is caught it is unhooked and returned to the water before exhaustion or serious injury.   Over the years anglers have accepted the idea fishing for fun rather than food.

In Canada catch and release is mandatory for some species and require the use of barbless hooks to facilitate release and minimize injury. Today catch and release is practiced by most all anglers, fishing guides, and promoted by fishing based organizations for Muskie, Walleye and Bass ensuring healthy fish populations for the future.

Here is a guideline for the key aspects of catch and release use the correct tackle:
Fish with appropriate rod, reel and line for the species of fish your targeting. When catching a fish you want to minimize the fight time. The greater the time playing a fish the more lactic acid build up and exhaustion sets in for survival. If fishing in cover (weeds) or warmer water use a heavier line than normal to reduce stress for the fish.

Bring your release tools:imagesCAHBYCEU

  • Always carry needle nose pliers,
  • hookouts, jaw spreaders
  • and a small bolt cutter for larger fish.

When landing a fish leave the fish in the water for the unhooking process to avoid any handling, if lip hooked a simple flick of the needle nose pliers should remove the hook. If a landing net is used, leave the net in the water when removing or cutting hooks. If the fish has multiple treble hooks embedded from a artificial lure, use the bolt cutter to cut the hooks, replacement hooks are inexpensive. If the hook is lodged deep in the gullet, never pull on the line or try to rip a hook out. Cut the line as close as you can to the hook or the hook itself. Jaw spreaders come in very handy for larger game fish aiding in the cutting or removal of hooks.

Catch and Release Nets:
All quality net manufacturers today have catch and release nets in their product lines. When selecting a net, hoop size, depth of net bag and type of mesh need to be considered for practicing catch and release and the assurance of fish survival after releasing. Using a larger hoop size and deep net bag will reduce the margin of error during the netting process and the extra net bag depth will allow for a portable live well during hook removal. The type of netting (mesh) is important in reducing the removal of the fishes protective slime layer while the fish is in the net. Today there are soft micro fiber knotless mesh, ideal for trout, bass and walleyes. Rubber mesh is an elastic soft molded rubber also used by bass and walleye anglers. Dip treated extra strong knotless mesh with a protective coating is used for musky, pike, salmon and large catfish.

Barbless Hooks:
barbleess-hookUse barbless hooks for quick easy hook removal and reduced handling times. Some anglers believe that using barbless hooks will cause too many fish to escape. When fishing barbless hooks concentrate on keeping your line tight while fighting a fish. You’re catch rate with barbless hooks will be as high as those achieved with barbed hooks. Barbless hooks can be purchased from several major manufacturers or can be created from a standard hook by crushing the barb(s) flat with needle-nosed pliers. If fish are removed from the water for a photo or measurement, key aspects of proper handling include:

  • Keep it wet:  Avoid touching the fish with dry hands or putting them down on dry surfaces ( boat gun whales or boat bottom, docks, shoreline rocks and sand) Dry hands and surfaces removes the scales and protective slime layer leaving the fish vulnerable to fungal skin infections. Only touch fish with wet hands or using a wet towel.
  • imagesCAT78X00Use proper holding techniques:  Never hang a fish from their jaws/mouth/gills vertically. Hold all fish horizontally and support as much of its body as possible to avoid injuring its internal organs especially larger fish. Never grip a fish by the eye sockets if you intend to release it. By doing so you abrade its eyes, injure the surrounding tissue and may cause blindness Learn the proper hand placement for holding fish under the jaw bone not in the gills. If you never held a large fish have a experienced angler or fishing guide show you, or have the guide hold your fish for the photo.
  • Measuring the Fish:   When you catch that trophy fish and your desire is to release it to fight again, but you wish to have the measurements for a fiberglass replica here’s what to do. If possible measure the fish in the water using a floating ruler or a tailor’s tape. Measure from the tip of the nose to the tip of the tail and around the girth of fish at the widest point of body. If you’re bringing the fish onboard for a measurement using a bump board (ruler with a stopper at one end) wet the ruler before you use it. The time for measuring and photo’s should be minimized to under 15 seconds (start counting as soon as the fish is lifted out of the water).

OLYMPUS DIGITAL CAMERA

  • For the sake of survival of the fish we discourage the use of conventional scales where the fish is hung by the jaw for weighing the fish to be released – it can damage the jaw or gills and places extra stress on the backbone and internal organs of the fish. If you’re wondering how much you’re catch and released trophy weighed. We have a handy fish weight calculator to determine the approximate weight of your catch.
  • Releasing the fish:   Place the fish gently back upright in the water, holding the tail and supporting it’s weight by placing your hand under the belly, gently roll the fish side to side allowing it to get its bearings and catch its breath until it is fully able to swim off under its own power. If current is present it is important to face the fish into the current thereby allowing fresh, oxygenated water through its gills. Do not try to release or revive a fish using a thrusting forward/backward motion, the backward motion will suffocate the fish.
  • Photo Tips:   As catch and release fishing is growing in popularity amongst anglers, photography has become the most important way to record a trophy fish or a memorable moment from a fishing trip. A good quality photo will give you a reference for the fish’s exact coloration and particular markings, a skilled taxidermist can create a fiberglass lifelike replica mount or commission a custom trophy portrait that encompasses the entire story behind the catch, both are worthy of “fine art!”

Try to land fish as quickly as you can.  The more time they spend fighting, the more lactic acid they build up. In fish, lactic acid is toxic. Fish also use up oxygen, become out of breath, if you will, during the exertion of the fight. Just like us, the shorter the time of exertion, the quicker they will recover. Landing the fish as quickly as you can becomes even more important as the water temperature rises.

The following few tips will help you take better pictures the next time you go fishing.  Before lifting the fish out of the water, have your camera turned on and ready to shoot. Don’t hurt the fishes chances of survival by keeping it out of the water for too long.

??????????????????????

  • Shooting angles, always have the sun behind the photographer, natural sunlight provides the best light with rich warm uniform colors and tones.
  • Always use the fill flash, even during mid day when the sun is at it’s peak. Using fill flash will add light to shadowy area’s of your photo.
  • Push back the hat and take off the sunglasses to remove the shadows hiding the anglers face, and remember that SMILE!
  • Don’t have the angler hands obscure any portion of the fish especially the head 
  • Take a few photo’s to ensure that you get at least one good shot.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

Tags: , , , , ,

Keeps away flies, wasps …

Zip Lock Baggies………..who knew?

We went to a restaurant and sat in the patio section. We happened to notice zip lock baggies pinned to a post and a wall. The bags were half filled with… …water, each contained 4 pennies, and they were zipped shut. Naturally we were curious! The owner told us that these baggies kept the flies away! So naturally we were even more curious! We actually watched some flies come in the open window, stand around on the window sill, and then fly out again. And there were no flies in the eating area!

repellent
Below are comments on this fly control idea. I’m now a believer!

Zip-lock water bags: #1 Says: I tried the zip lock bag and pennies this weekend. I have a horse trailer. The flies were bad while I was camping. I put the baggies with pennies above the door of the LQ. NOT ONE FLY came in the trailer.The horse trailer part had many. Not sure why it works but it does!

#2 Says:Fill a zip lock bag with water and 5 or 6 pennies and hang it in the problem area. In my case it was a particular window in my home. It had a slight passage way for insects. Every since I have done that, it has kept flies and wasps away. Some say that wasps and flies mistake the bag for some other insect nest and are threatened.

#3 Says:I swear by the plastic bag of water trick. I have them on porch and basement. We saw these in Northeast Mo. at an Amish grocery store& have used them since. They say it works because a fly sees a reflection& won’t come around.

#4 Says:Regarding the science behind zip log bags of water? My research found that the millions of molecules of water presents its own prism effect and given that flies have a lot of eyes, to them it’s like a zillion disco balls reflecting light, colors and movement in a dizzying manner. When you figure that flies are prey for many other bugs, animals, birds, etc., they simply won’t take the risk of being around that much perceived action. I moved to a rural area and thought these “hillbillies” were just yanking my city boy chain but I tried it and it worked immediately! We went from hundreds of flies to seeing the occasional one, but he didn’t hang around long.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

Tags: , , , , ,

About Wawang Lake

About

cabinsc1c4 [640x480]
No Other Resorts, Homes or Cottages on our lake – just us & YOU!  As a matter of fact our nearest neighbors are 28 miles south of us.  Our post office is further yet at 50 miles south of us.  So if you’re getting the impression we are secluded – you would be right.

Terry came to this magnificent area in 1969 and I soon followed a few years later.  One day he said to me, “We should build a resort’.  What he didn’t know about me and soon would learn is that when I have a goal – I’m determined to see it through.  So – Wawang Lake Resort is here today because of our efforts and shear determination –  it couldn’t fail.

Now let me tell you a little about our lake and our resort…….

Wawang Lake is a 5,000 acre spring fed lake with  miles of  irregular shoreline,  which offers  the fisherman great fish  habitat to explore, such as sandbars, shoals,  weed beds and  islands and many of these areas are adjacent to deep water making them attractive and popular fishing spots for both walleye and pike & perfect  for exciting  fishing for the fisherman.

Our  lake is  easy to navigate and offers a variety of lake structure that is excellent  for both walleye and northern pike and better yet it’s nearly stress free for mishaps for those that bring their own boats.

IMG_0037

We have seven cabins that have a spectacular view of our magnificent lake.  You  will  be sure  to enjoy the beauty  of our 1,500′ tropical like beach with gradual incline, and, the resort’s shoreline bottom is all sand for an afternoon swim or just relax tanning on the beach.  Our lake also has many other sand beaches that are  perfect for a private swim, or the traditional shore lunch.

This slideshow requires JavaScript.

Upon your arrival we offer a detailed map of the lake and will highlight areas showing where the successful fishing has been prior to your arrival.   Our main objective for the angler is to catch fish.  Our main objective for the hunter is to be successful.

Wawang Lake is well-known for its trophy sized walleye and northern and over the years has brought many great memories of the action and the numbers of these large fish have offered.  For instance, the largest walleye  caught & released was 37”  15 1/2 lb, and, the largest northern also caught & released was 52.5”  38 1/2 lb.  Guests have stated that they have caught and released many trophy fish during their stay in fact our records show that one guest caught over 40 trophy fish in three visits to Wawang Lake.  Nice!

20 x 24 (4)    48.5    26.25

 If you follow this blog you’ll find that the fishing is utterly spectacular.  So why pay for the expense of fly-out services, or, the longer trip of boat-in services when you can simply drive up to Wawang Lake Resort with the comfort of knowing that your vehicle is just outside your cabin door.
Wawang NEW Map

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , , , , ,

WIN a FREE Trip for TWO

LIKE us on FACEBOOK for your chance to Win a FREE Trip to Wawang Lake Resort – ‘CLICK’ image to go directly to our Facebook page.

facebook-poster

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 
 

Tags: , ,

Spring & Summer Mayfly Hatch

walleye teeth 2Take a close look at a walleye’s mouth and its teeth tell the story – they have evolved to feed on fish. Yet, walleye don’t survive on fish alone. Ever the opportunists, these marble-eyed predators will snatch up meals whenever they get the chance, and there are few underwater appetizers as easy for them to eat as may fly nymphs.

Mayfly nymphs are more than simple snacks for walleye. They’re a main component in walleye diets at certain times of the year. In the spring, gluttonous post-spawn walleye will cruise soft-bottom areas feeding on nymphs and in the summer walleye will target emerging nymphs during a hatch. To effectively catch walleye feeding on nymphs, anglers need to understand the predator-prey relationship between these two species. This includes where to locate nymph-eating ‘eyes and downsizing lures to imitate these immature may fly morsels.

The life cycle of mayflies is;  egg to nymph, followed by nymph to adult. A may fly spends the majority of its life as a nymph, also called larva. Classified as benthic (bottom dwelling) nymphinvertebrates, nymphs crawl along the bottom, hiding in debris and vegetation while some create burrows. Flats and bays with soft mud or silt bottoms are prime nymph habitat. Some nymphs live in deep water, but most stay shallow to soak up sun which is crucial for their growth.

In spring, maturing nymphs become active as they prepare to emerge from the water. Once conditions are right, mature nymphs swim to the surface or crawl on land, shedding their casings and molting into winged adults. As adults their lifespan is relatively short, with their sole purpose to mate before dying. As with any migration in nature, increased activity and concentrated numbers of organisms will attract predators. The mayfly-walleye relationship is no different.

may_fly_life_cycle

“Primarily the time of year when a fish like walleye zeros in on may fly nymphs is the early to late spring period when the organisms are emerging from the mud in fairly concentrated areas, especially the types that burrow into the substrate,” says the experts.

Given their post-spawn predisposition to binge-feeding, catching walleye targeting may fly nymphs can be easy – if you know where to look. The first step is finding soft-bottomed flats comprised of mud, sand and silt that hold may fly nymphs. Some sonars display soft-bottom areas as a thin line as mud or silt absorbs and scatters the sonar’s signals.

Once you’ve found some soft-bottom areas, fish those that are close to spawning areas first, as these spots are natural transition zones and resting points for recovering fish. Also consider the light preferences of walleye. Shaded flats or ones containing weeds and wood will hold walleye better than ones in sunlight and void of cover.

3fbabdf5_hooksSmall 1/16 or 1/8-ounce jigs in both dark and light colours can be deadly when walleye feed on nymphs during early spring. Try to make jigs mimic a nymph’s erratic movements during the retrieve. If casting, slowly crawl or subtly hop it along bottom. If vertical jigging, thump the jig in place to kick up debris. This tactic appeals to a walleye’s curiosity and can trigger hits.

Walleye often suck-in nymphs and hits can be subtle. Stay focused on watching your line for the slightest twitch indicating that a walleye has sucked in your bait. You need to set the hook immediately or the fish will blow the bait back out. You will often find that tipping the jig with a small piece of worm will entice more bites and gives you more time to set the hook, as the fish hangs on to the jig a little longer. A rod with a sensitive tip and low-stretch line will also help you detect hits.

If fishing slows, a slip bobber and a small jig tipped with a piece of worm or leech can tease out a few hits. “After you cast out, let the jig and float settle for a few seconds and then slowly pull or reel in approximately three to four feet of line, then pause again.” Continue this style of retrieve until you have covered the area.

During spring feeding binges walleye are not as selective on baits matching-the-hatch as they in the summer. When spring fishing this season pay attention to water surface activity and look for isolated hatches. If near post-spawn staging areas, these spots might serve as feeding zones for recovering walleye. Fish them with jigs or slip bobbers and live bait.

Here is a good example of the rewards reaped when following a few
tips when fishing during a May-fly hatch.  The King group
caught 57 trophy sized walleye 25+ and boated 150+ fish per day.

8 Lake Map & Stats

In the summer, the early stages of a may fly hatch can produce good fishing as walleye will feed aggressively, competing for the small number of nymphs. However, when large hatches occur lakes can become overrun with food, and walleye tend to become extremely selective feeders.

Anglers need to downsize presentations to fool summer, nymph-feeding walleye. “The particle size of nymphs tends to be a bit smaller than what people think the average-sized, adult walleye is going after. People may be fishing with presentations that are too large or don’t mimic emerging may fly nymphs,” experts say. Depending on the species, nymphs can range in size from 0.5 to 1 inches in size. Aside from downsizing lures, anglers also need to fish exactly where walleye are feeding in the water column.

Anglers also need to move to where hatches happen.  During the may fly hatch,  walleye are generally up shallower. You can catch walleye in water as shallow as three feet, even on sunny days.  When choosing where to fish flats, concentrate on breaks and holes. Walleye always like to have deeper water adjacent to their feeding flats!

Small jigs can be productive if walleye are bottom-feeding on nymphs during hatches. Bucktail or marabou jigs are particularly deadly, as feathers and hair pulsate in the water. This can be the subtle movement that is needed to trigger finicky walleye. Deadsticking a bucktail jig can be effective for neutral or negative mood ‘eyes. What this does is give inactive walleye a chance to come over and examine the bait – this may get you a few more strikes on those really slow days.

black bucktailWhen walleye are aggressively feeding on nymphs during a hatch in weedy areas, ago-to bait is a bucktail jig in black, with either a red or white strip on the side. In the weedy flats aggressively jigs these baits.  This causes the feathers and hair to expand and contract giving the bucktail a life like appearance.

To fish hatches, start with small, jointed minnow baits, fished on a stop-and-go retrieve. It’s important to mimic the action of the larva in the water as it floats up from the bottom, so a slow up and down cadence of your presentation is key. If these baits do not produce,  switch over to jigs. Swim jigs and  scale down to using two to three-inch grubs with 1/8 and even 1/16oz heads. Work these baits along weed edges and over weed tops, searching for where walleye are located in the water column during a hatch.

Another productive bait to target walleye during a hatch is a weighted, single-hook spinner rig, featuring a small #3 Colorado or Indiana blade. Colorado and Indiana blades allow the lure to be retrieved slowly, matching a nymphs’ speed, while producing vibration and flash. Widely used on Lake Erie during hatches, it is often called a may fly rig.

A more subtle variation of the may fly rig (resembling a live-bait rig) is a No. 2 or 4 octopus hook tied below a sinker. Tip rigs with a small piece of worm, anywhere from an half to two inches in size.

mayflyrigDragging may fly rigs along the bottom or slowly swimming them to the surface will imitate nymph activity. Other elements of the retrieve should include frequent pauses, stalls, and lifting the bait up again. Rigs can also be counted-down to target suspended walleye feeding on emerging nymphs.

During summer walleye feed on vulnerable may fly nymphs during hatches. Using small baits and imitating a nymph’s erratic movements will take fish when traditional baits won’t get a sniff. Integrate the above strategies into your repertoire, and you’ll be turning may fly hatches into opportunities for increased catches.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 
Leave a comment

Posted by on April 26, 2014 in Fishing, Mayfly, Walleye Fishing

 

Tags: , , , , , , , ,

Weather Dictates the Fishing

sunset with orange clouds

We cannot stress enough on how the weather is the biggest determining factor on the fishing outcome on any fishing trip. Below is a good read on how weather affects the fishing and tips on what to watch for along with getting the upper hand on the situation.

The earth consists of two pressurized environments (Air & Water). Sensible weather, the day-to-day weather that we experience everyday is one of many factors that affects fishing as well as our daily lives. Weather changes are caused by atmospheric changes in pressure (barometric pressure) driven by the fast moving river of air called the jet stream located at about 30,000 feet in the atmosphere!

A basic rule is that rising air (falling pressure) produces clouds and even the possibility of rain and snow. Sinking air (rising pressure) means clouds and precipitation development is suppressed, and usually brings clear skies and fair weather. Weather conditions do impact the catch rate indirectly of the species you are pursuing, and will depend on various interdependent factors such as: availability of fish, water depth, temperature, clarity, wind, and barometric pressure (The measurement of weight of the atmosphere above us)

Water Systems are pressurized environments. Water is much heavier than air. A cubic foot of air weighs 1/12 pound (lb). A cubic foot of fresh water weighs 62.4 lb. and a cubic foot of sea water weighs 64 lbs. Water pressure, like air pressure, is a function of weight; the deeper one goes the greater the surrounding water pressure. Therefore, the direct effects of changing barometric pressure (air) is greater on fresh shallow water species than deeper lakes or oceans where the depth of the water inhabited by deep water species makes the air pressure variations insignificant.

imagesCA1344Y9Air pressure and other variables:
The air that surrounds the earth is constantly placing pressure on the earth’s surface. As the jet stream drives the large areas of high and low pressure on the surface of the earth, these large pressure systems then in turn, drive the large-scale wind flows at the surface levels. As air inherently wants to move from higher to lower pressure (the reason why air wants to escape a bike tire and not vice versa) it will converge in a counter clockwise manner around low pressure, and diverge in a clockwise manner around high pressure. This is because the Earth is rotating and the Coriolis force (the deflection to the right of one’s motion on large special scales) results in the observed surface winds. These resulting surface wind flows create weather fronts, which are distinct boundaries from say cold-dry Canadian air, and warm-moist Gulf of Mexico air. There are three basic types of fronts: Cold, Warm, and Stationary.

Typically, low pressure is the “parent” system for these frontal systems, with cold fronts often extending from the center of low pressure and orientated to the south and west of the low center. Warm fronts often extend from the low center and are positioned to the east and north of the low center. When a warm front passes, pressure still tends to fall as the warm front is often out ahead of the low, meanwhile, when a cold front passes, pressure tends to rise because the low center has already passed, and high pressure is building. Understanding a front’s make up and the weather they bring is key to predicting weather events.

coldfrontCold Fronts: (High Pressure)
As a cold front passes the air pressure tends to rise (air sinks) as colder and drier air typically resides behind a cold front, which is more dense than warm-moist air, this can be recognized by clearing skies after inclement weather. Also, you may notice strong northerly winds after a cold front passes. This is because of the clockwise wind flow around higher pressure, coupled with a large change in pressure between the relatively close area of lower pressure, and the impending area of higher pressure. These abrupt weather changes disturb the environment, and most game fish will seek deeper water and or cover becoming inactive. The cold front effect on fishing lasts 1-2 days before another front moves in or the weather stabilizes.

If your fishing in a cold front here’s a few suggestions: If possible fish small dark water lakes or rivers rather than clear deep lakes. Live bait is the preferred choice with a slow presentation; vertical jigging or slip bobbers are the best. Fish near the bottom or in weeds, around cribs and rock piles. As cold fronts bring lower air temperatures reducing the water temperature fish during midday when the water is the warmest.

imagesCANYF207Warm Fronts: (Low Pressure)
When a warm front approaches the air pressure is low, warm, moist air is rising and moving counterclockwise toward the center, creating less pressure. Because of this, a barometer usually shows falling pressure as a storm system approaches. Fish sense the drop in air pressure and become active, some fishery biologists attribute the increase of feeding behavior from atmospheric reduction in pressure that affects their air bladder another opinion is fish use vision as a primary feeding sense, as a storm hits with heavy winds this churns the water making it cloudy and more difficult to feed.

Here are some fishing tips during a low-pressure front: Cloud cover and rain is associated with low-pressure fronts, these reduce sunlight causing fish to move higher in the water column. Use surface and shallow running lures over weed beds, weed edges, and over open water if schools of baitfish are found. Faster retrieves are recommended, as fish are active. If storms become intense with thunder and lighting fish will become less active or “spooked” by these conditions and move to deeper water. From a safety point you should never fish during a lighting storm. Lighting may strike many miles from the center of the storm. Take shelter upon an approaching storm fishing rods make ideal lighting conductors.

imagesCAQ8FKX7Stationary Fronts:
A stationary front is a weather boundary between two different air masses (fronts) in which neither is strong enough to replace the other. They tend to remain essentially in the same area for extended periods of time. A wide variety of weather can be found in a stationary front ranging from sunny and fair to cloudy and even prolonged rain. Stationary fronts can focus lift in the atmosphere and can actually help develop areas of low pressure along them. This process results in the stationary front morphing into a warm front on the east side of the newly developed low and a cold front on the west side. This means that even stationary fronts can change with time and should be monitored for future implications on your luck out on the water.

Fishing during a stationary front rates good to excellent. Barometric pressure remains stable for an extended period of time. Fish develop a comfort level and a feeding pattern. Find the pattern of the specie your pursuing and your catching fish. Most fishing presentations work during this period. Best Fishing Times (Solunar – Moon Phase Tables) are based on using stable weather conditions.

imagesCA38RWSQWind & Clouds:
As the wind related proverb says “When the wind is east the fish bite the least, when the wind is west the fish bite the best.” Wind is an influential factor in fishing behavior as it stirs the food chain, provides oxygen and cover from the sun with wave action. Constant wind blowing from the same direction over days will migrate game fish on the windy shoreline to feed on baitfish. Water temperatures will increase also as the surface water is pushed by the wind. This is especially helpful in Spring and Fall seasons as the angler seeks the warmest water. Westerly and Southern winds are proven to produce the best fishing results as the proverb states. Clouds and cloudy conditions have similar effects as wind by reducing sunlight on and near the surface. Light sensitive fish will become more active, a combination of light wind (chop) and cloud cover condition is excellent for surface lures.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 
Leave a comment

Posted by on April 25, 2014 in Barometer, Fishing, Fishing TIPS, weather

 

Tags: , , , , , , ,

Northern Pike Handling, Filleting & Take the ‘Y’ Bones Out

When it comes to caring for Pike that you plan to use at home, the first and probably most important step in assuring a quality meal is to keep the fish fresh prior to cleaning.   Compared to other popular game fish, the flesh of Northern Pike is among the most likely to deteriorate if care is not taken to keep the fish fresh right up to the cleaning table.   When you plan to save some for the table, one great approach is to wait until later in your fishing trip before you start saving fish to take home.

45481
After filleting it’s best to freeze your filets properly for transportation back home from the lodge.  All your hard work out on the lake could be confiscated by a game warden for the following reasons:

  • frozen in one big blob is considered ‘unidentifiable’
  • failure to keep one square inch patch of skin on the filet
  • packaged improperly (the correct procedure is one fish per package, layed out flat – side by side)

Keeping fish frozen during your stay allows for easy transportation all the way home.  Frozen fish takes the place of ice, however, midway you may want to check the cooler to inspect your filets and add ice accordingly as this could  make a difference at the dinner table.

Another key factor in preparing gourmet meals using Northern Pike is to avoid saving Pike in the freezer for long periods of time.  Pike flesh contains a particular Amino Acid that breaks down fairly quickly when fish are stored in the freezer too long. So even if you’ve taken great care to keep the fish fresh up to this point, you could be disappointed when you pull out a package of fish that you’ve been saving for that special occasion.  Because Pike are not well suited for long-term storage, at the simple rule of thumb is Pike are to be eaten within a couple of weeks of catching them.. 

Removing the “Y” bones from Pike fillets is part of the mystery that has kept lots of otherwise willing anglers away from using these fish in recipes and removing these small bones is really easy! Even the smallest Pike can be easily de-boned by anyone who can fillet a Walleye or most any other fish. In fact, even the term “Y” bone is a misnomer because this so called “Y” bone really isn’t much different than the strip of bones that you’d remove from a Walleye or any other fish caught in our waters. It just happens to be sandwiched into the grain of the fillet where it is protected from “frying out”. 

This is one of those times when it would be easier to do the job than it is to describe how to do it, but look at the picture of the finished fillets and you’ll get a good idea of how to follow these instructions.

npBegin by filleting the fish and removing the rib bones as you would a Walleye or most other freshwater fish. Once you have taken the fillet, study it for a minute. Take a look at the centerline that divides the fillet horizontally and notice the row of light bones visible halfway between this centerline and the top (fishes back) of the fillet. You will be making one cut on each side of this row of bones. You’ll also see that the flesh has a “grain” much like the grain of a nice oak board. The “Y” bones run with this grain and you can use this grain as a directional guide when making your cuts.

COMPLETE DIAGRAM BELOW:

Cut 1:
Start by making a cut just above this row of bones that you can see (and feel). This first cut will be shallow (about ¼ inch) and it is perpendicular to the fillet. This simple, straight cut is used mostly as an access cut to get your knife into position for the next step. Using the tip of your fillet knife, you’ll be able to feel the edge of your knife contact the bones at the inside corner of this “L”  where the bones turn toward the top of the fillet. When you feel the knife contacting those bones, take care not to cut through them.

Cut 2:
Turn the edge of your knife toward the top of the fillet at about a 45-degree angle and follow this edge. You’ll be able to see the bones as you gently slip your knife-edge along this edge. Stop the cut before you reach the top edge of the fillet.

Cut 3:
This is the finishing touch. Start this cut below the row of bones on the side nearest the centerline and simply follow the same angle that you used to make cut 2. As the edge of your knife moves toward the top of the fillet, you’ll begin to feel this strip of bones peeling away from the rest of the fillet. Trim along these edges as needed to remove the strip and voila, you’re finished.

ybone


So There you have it, all you need is a little faith in yourself, a fairly good fillet knife and a little practice. You will soon learn that there is really no trick at all and before long your family and friends will be standing in line at dinner time waiting to sample your newest Pike recipe.

ENJOY YOUR NEXT FEED OF PIKE!

Sign up to automatically receive our posts –   subscribe with your email……it’s easy – https://wawangresort.wordpress.com/

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 
Leave a comment

Posted by on April 24, 2014 in Fishing, Northern Pike, pike

 

Tags: , , , ,

Candle Heater

Here’s a useful and nifty idea to keep you warm in your home when it’s cold outside and the power has gone out.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 
 

Tags: , ,

Top Lures For Early Season Pike

With spring, thoughts of hefty pike in shallow water dance through anglers’ heads. Fresh from the spawn, pike will be found in specific locations and can be caught with a variety of lures.

PIKE2 (2)

At that time of year, the fishing can be fast and furious, monster pike are more than willing to entertain you with a game of tug-of-war. Jump-start your fishing season by tangling with the mighty “water wolf,” and be prepared for some of the best fishing you can imagine.

piketipsWhere To Find Them
Pike spawn in shallow, weedy back bays shortly after ice-out. Bays and shorelines found on the north side of the lake will be the first to warm up, and will be the most attractive to the cruising pike. Once the spawn is complete, the majority of the fish will linger in these back bays for some time, gorging on the available baitfish and awaiting a warming trend to occur in the main lake area.

Searching the shallow bays on your favorite lake will be the key to finding post-spawn pike. Make sure the area you are concentrating on has a variety of cover — be it weeds, logs or stumps — and is between the depths of 2 feet and 6 feet. Finding an area like this has pike written all over it, although your next step will be deciding what to throw at them.

Lures To Consider
One of the most productive and easiest baits to fish for spring pike is the spinnerbait. It represents an easy meal, has a bulky profile in the water and gives off flash and vibration that rings the dinner bell loudly for these opportunistic feeders.

A personal preference early in the season is a spinnerbait sporting a large willow-leaf blade, a sturdy wire body that will stand up to the abuse a pike can dish out, and a fur or nylon skirt that undulates nicely in the water. Couple this with a needle-sharp sturdy hook and you have the perfect setup for the mighty pike.

Bright colors seem to be the best route early in the season with chartreuse, red and white getting the nod for most applications. Depending on water conditions, it is best to experiment with natural and unnatural colors until you hit a winning pattern.

Topwater
Nothing can compare to the visual thrill and heart-pounding excitement of taking a pike on a topwater plug. Post spawn fish are more than willing to grab an easy meal off the surface, and the shallow water locations make this tactic extremely productive.

topwater3There are a number of topwater baits on the market that are suited to early season pike and have worked well for me over the years. The buzzbait is a top choice due to the large silhouette it provides and the surface commotion it exhibits. Fish this bait with a steady retrieve and be prepared to hold on tight. A stinger hook may be necessary for those fish that strike short or blow up on the bait.

 

Another key lure is the Zara Spook. The lazy side-to-side motion is intoxicating to both aggressive and neutral fish, and many of the pike you encounter will hunt down this bait as if it truly is alive. Choose the larger version Spook and make sure you fish the lure with a wire leader in order to save it from the jaws of this predator.

Spoons
Spoons have become a staple among early season pike anglers and for good reason — they catch fish. A spoon exhibits the movements of a baitfish precisely, and the positive vibrations and body characteristics make it a good choice.

spoonsProven spoon picks are the Red Devle Dardevle, Five of Diamonds, Red Eye, Blue Fox, Original Doctor, Johnson Silver Minnow, and many of the Williams Wobblers’ line of baits. Experiment with different weights, and thickness of bodies, in order to establish those that have the most desirable motion and action in the water, and which ones the pike show a preference to striking.

A trick to keep in mind for fish that follow yet refuse to hit, is to suddenly stop the spoon in mid-reel and let it flutter slowly downward. This tactic will entice the majority of “hot” pike to strike, and has proven itself repeatedly.

Head to Wawang Lake this spring and have a tussle with the mighty “water wolf.” The fishing will be fast and exciting and the eagerness of the pike to strike will have you returning year after year.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

Tags: , , , , , , ,

 
%d bloggers like this: