RSS

Category Archives: Jig Fishing

TROLLING TACTICS FOR WALLEYE FISHING

Scenario: Warm, misty overcast evening in August. Mid lake rock humps topping out in the 16 to 22 foot range.

hump1Usually, by late August many walleyes in deep clear lakes begin to leave their summer home ranges,suspended over deep open water, and migrate onto nearby rock and gravel humps. More often than not, the best humps top off at a range near the lake’s thermocline. For example, if a lake typically thermoclines at 22 feet, humps in the 18 to 22 foot range are most apt to hold fish, while shallower cropping structures will be less productive.

When these mid lake humps are small, one can usually do quite well jig fishing them, but more so these humps tend to be large. This is when board trolling a spread of crawler harnessed spinner rigs anchored to bottom bouncing weights off planer boards is the key way to catch them. This is precisely the situation Joe is faced with in this segment. The mid lake rock/gravel structure is very large with a number of smaller “spines” topping out in the 14 to 18 foot range; however, most of the rock/gravel structure is much deeper at 22 to 26 feet.

The small spines are holding the fish, but they are somewhat difficult to stay on top of and pinpoint precisely in open water. This problem is easily solved by repeated trolling passes using this board/bottom bouncer/crawler harness system. Trolling ever so slowly, once any bottom contact is made, you can literally drag an armada of tempting tidbits across these spots and find these small groups of walleyes that are utilizing these spines.

imagesCAMIT1B6The rigging trick here is to set out just enough line below the planer board so it will catch, or better termed “tick”, the top of these spines, yet not get hung up. The best way to accomplish this is by staying as vertical as possible with your set up. Using a larger weight, in the 2 ounce class, in order to stay as vertical as possible, let out just a tad more line than the spine depth tops. For example, measuring out around 20 feet of line between board and the bottom bouncer (Rock Runner) weight is nearly a perfect setting for 16 to 18 foot humps. It might require a bit more line length in strong winds and big waves, but not in soft winds and slow trolls.

ff-graph1Troll very slowly across these humps; just fast enough to activate the spinner and keep the spinner/crawler harness suspended off the bottom. Watch the board closely and you will notice when the Rock Runner weight is touching bottom. It will make the board bounce back. This is a key time to watch for a strike. Strikes, by the way, will respond on the board by the board jerking back in a tug-like fashion. Within a few seconds, the weight of the fish will then start to drag the board out of its original position destroying its side ways angle, and placing it more directly behind the boat. Then, it’s simply a matter of crankin’ the fish in and re rigging.

imagesCAV15KW1Throwing a floating marker off a reef after a fish is caught is a good idea for reference, as is punching in the coordinates on your GPS system. As soon as you get a strike, before pulling the rod from the rod holder, immediately reach for a floating marker and pitch it over the side. Also, heave the marker just past the outside of the planer board that’s showing the strike. This places you as close to the exact location of the strike as possible. All return trolling passes can then be made precisely close by the actual spot where the strike occurred.

Summer trolling reefs with bottom bouncers, spinner harnesses and a crawler rigged off planer boards is a super hot tactic. It is especially good over large mid lake reef structures that may be more difficult to fish by casting and jig fishing. At the very least, this system enables you to cover a great deal of water very efficiently, and quickly eliminates the dead sections of a large reef. You can then refish the spot more slowly with finesse jig fishing presentations if you wish. 

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , ,

Bucktail Jigging For Weed Walleye

 3fbabdf5_hooks

When walleye head to the shade of the salad, or cruise along the edge of vegetation, a bucktail jig can be your greatest tool for seducing them to strike. Not only is the undulating hair a visual stimulant, but also the erratic cadence of the bait as it is ripped and jigged with vigor.  Working bucktails is a different game than with regular jigs, but the technique speaks for itself with the big results you’ll be rewarded with.

A standard bucktail jig is comprised of a lead head, with layers of bucktail tied and glued to the collar of the bait. Strands of tinsel are often interwoven, adding an additional aspect in terms of visual attraction. When moving, the hair forms a streamlined body, replicating a baitfish perfectly.   At rest the hair fans out, adding a different dimension in terms of appearance.  In comparison to a jig and plastic, the bucktail is far superior in terms of weedlessness, making them an excellent choice when the cover becomes thick and the walleye go into hiding.

The Laws of Rip Jigging

Rip jigging is a specialized technique that can produce astounding results.   The premise is simple:  flip a bucktail jig out twenty feet or so.   Let it make contact with the bottom vegetation, then give a quick and sharp snap of the rod, breaking the jig free from the snag and sending it up and above the cover. Repeat process. Depending on the mood of the fish, rips can be positively violent or more controlled.   You will find that the warmer the weather, the more aggressive you can be.

Walleye are an opportunistic feeder. They will conceal themselves in the thickest of   cover, waiting to ambush an unsuspecting baitfish as it swims by. Ripping a bucktail jig through the salad will easily get their attention (due to the   commotion it causes) and make them commit to the speedy meal before it gets away. Depending on the mood of the fish, they will either smack it as it breaks free from the green stuff, or rise to engulf it as it slowly falls back down. This is one technique that has worked well is the fall period. Fish will raise their activity level and feedbag at this time, and when the wind howls and the fish move shallow, you can definitely get into a bunch of them – BIG ones too! In terms of tipping options for rip jigging – go the route of none.   Minnows and worms won’t last long with the constant weed contact, and due to the speed of the retrieve (and split second reaction time),  it doesn’t makes much of a difference in terms of catch rates.

Dunking For Fish

Although it may seem unsuitable dunking the weed pockets for walleye is a tried and true technique. Shallow water and expansive weed flats make up the playing field for this tactic, and a stout rod and bucktail jigs round out the arsenal. Pounding depths between four and 10-feet is your best option, and clear water is always your best bet. Work weed flats and clumps with the wind or an electric motor, lowering a heavy bucktail jig into every hole and edge you drift over.  Let it sink directly to bottom, and give it a few lifts and drops before moving on. (leave the bait in each hole for at least ten seconds before trying the next.) Walleye will bucktailsituate themselves on these edges, both inside and out, pouncing on any bait that free falls into their lair. Visually, this is a fun and exciting tactic to employ, as most fish are actually observed sucking up the bait in the blink of an eye, and quickly charging back into the weeds! A lightening quick hook set and medium-heavy rod is recommended if you hope to put a net under the belly of any of them. Tipping your jig with a minnow or worm is an excellent choice for this short-line tactic, as the fish has more time to be convinced to strike, and scent can be a contributing factor for that.

Swimming Them In When walleye are scattered over weed flats, and the vegetation is low and uniform in height, swimming a bucktail jig back to the boat can be a hot ticket. The rules are simple: cast your bait out and start reeling in, keeping your jig just above the weeds, and imparting the odd lift or two into your retrieve. This will allow you to cover large areas of water, and help you pick off those fish that are actively cruising while feeding. Your presentation will resemble a minnow making its way along bottom, and an easy meal in the eyes of our yellow predator.

Top Ten Tips For Bucktail Fishing

1.  For clear water conditions, match the hatch when it comes to colour. Murky water requires brighter hues.
2.  Braided line gets the nod for working bucktails in the weeds.
3.  Check line regularly throughout the course of the day.
4.  Apply ample amounts of scent to the hair of the bait.
5.  Choose high quality jigs that sport strong and laser sharp hooks.
6.  In rough conditions, choose brighter colours that will aid in attracting fish better.
7.  Lighter jigs work better for swimming, while heavier jigs work best for ripping and dunking.
8.  Heavy equipment is key. This is no place for ultralight combos or low diameter line.
9.  Watch for line movement or “bumps.” This can often signal a fish.
10.  Take note of where fish are found. Then search for other areas on the lake that are similar in make up.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , , , , ,

Vertical Jigging for More Fish

vertical-jigging-1Vertical jigging can be an invaluable technique, especially when it is placed into the mix with trolling, casting and static-line methods. It can be another powerful weapon in the angler’s arsenal, but, unfortunately, it is perhaps not used as frequently as it should be.

The advocates of vertical jigging state that not only is it a fun-filled way to while away the hours, but it is also a highly productive way to fish. Many anglers dramatically increase their success rate when they begin to use a vertical jig.

In fact, in some locations, vertical jigging is not simply one of the beneficial tactics, but it is the most productive method of fishing for walleye. The advantages of vertical jigging are numerous. For example, it is widely accepted as a cost-effective technique. In addition, it only requires a small amount of physical exertion and, most importantly, it is a basic approach that can be adopted by anybody.

The success of vertical jigging is made possible through the accuracy of the technique. Rather than trolling wide expanses of water, it is required that the angler does a little research first. By establishing the structure of the lake or river that you are fishing in, you can locate the positions that are most likely to contain the walleye. Of course, if you have radar equipment, then you will find pinpointing the walleye spots even more easy, but this is not necessary and a comprehensive map of the water should be sufficient.

vertical

There will be times when establishing the position of the fish leads you to the deep sections of the lake or river. If you are fishing for walleye in particularly deep waters, you may wish to consider using a partial glow head and spinner blade on your jig, as this is a great combination for deep fishing or trolling.

In terms of bait, when it comes to vertical jigging it really is a matter of choice. Any bait can be used, so, if you find that minnows, crawlers or leeches work best for you then, by all means, use any of those. Personal preference is such a large part of successful fishing.

More good news for beginners is that vertical jigging can allow for a margin of error. In other words, if you have let a walleye get away, but you know it is still under your boat, the vertical rig allows you to get right under the boat to try for a second chance. With many presentations, you may not expect to get a bite until the bait has reached the lakebed. However, with the vertical jig, you are just as likely to find success as the bait is on its way down. Subsequently, it is always a good idea to be prepared for those walleye.

Vertical jigging, or V-jigging as it is sometimes known, is an extremely enjoyable way to fish. It relies heavily on skill and technique, which is hugely satisfying for an angler. However, that does not mean to say that it is difficult to learn. Even beginners can take to vertical jigging and can be extremely successful with this method.

Follow our HUNTING BLOG

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , ,

UNDERSTANDING DIFFERENT WALLEYE PATTERNS

Walleye in Wood and Brush

5045378679_2afff95b5dIn many lakes drowned wood and brush are the main dominate cover that walleye rely on as a food source and shade from the sun. You will find scattered walleye around almost any type of submerged timber, stumps, logs, and trees that have eroded from shorelines. To increase your chances on finding a walleye hot spot of drowned wood and brush here’s a tip, deep water. The best wood is in or near deep water. A tree toppled off a steep river bank leading into deep water will hold more walleye than one laying in shallow water. Find a stump field flat next to an old river bed on a flowage and you’ll find a walleye magnet.

During early spring when the winter thaw occurs and high water floods rivers and flowages try shoreline brush and lay downs as this will harbor small baitfish and insects that walleyes feed on. As the water begins to drop walleye will move back to deeper water.

Drowned wood, lay downs and brush plies composed of fir, pine or maple and typically last for years. By contrast birch and poplar provide cover for two to three years before decomposing. Drowned wood is terrific cover. The more complex branches are below the surface the better fishing. More branches equal more cover for a game fish to ambush prey. Finding “good” drowned wood means finding walleye.

This slideshow requires JavaScript.

Finesse fishing in wood and brush requires fine wire weed less hooks (size 6-8) on a split shot rig, brush guard jigs from 1/8 to 3/8 oz., both tipped with live bait. These presentations will increase your hooking percentage and eliminate snags. When fishing deep water try a slip bobber rig. Don’t be afraid to drop your bait into the thickest tangle of brush and logs, the larger walleyes are usually found where the cover is densest, you may lose a few rigs in the process but the rewards are well worth it.

Suspended Walleye
Locating and catching suspended walleye can be a difficult task. Finding suspended walleye requires the use of a graph or LCD (liquid crystal display) depth finder. Once fish are located you must present the bait or lure precisely at that depth. For Wawang Lake one of the easiest techniques to do this is a slip bobber rig set at the depth walleye are found. If walleyes are a few feet from the bottom rather than lowering the bait try floating the bait up off the bottom using a slip sinker rig with a floating jig head or a float attached to the leader. You can also Vertical jigging - 1catch walleyes off the bottom by jigging vertically with jigs, blade baits and tail spin jigs, just keep the line taut to feel the strikes.

On large bodies of water such as the main, deeper sections of Wawang Lake the most effective and popular presentation for suspended walleyes is trolling with artificial lures.


Why Walleye Suspend
Water Temperature: In deep clear lakes walleye  will seek deeper water after feeding to avoid sunlight. On stained lakes they often move more laterally than deeper if the water temperature stratifies into layers. By moving laterally they will maintain in the same temperature layer. Walleye that feed on reefs will suspend off the reef to rest, not to feed.

Forage
Walleye are typically known to relate to the bottom for feeding, this is especially true when they feed on immature insects, particularly mayfly nymphs that hatch on the bottom. But other favorite forage do not necessarily relate to the bottom such as open water baitfish like shad and ciscoes that can be found almost at any depth. At times walleye will be opportunistic feeders by ignoring their temperature and oxygen preferences for an easy meal by suspending in open water just below bait fish schools that dimple the surface.

Oxygen
During the summer on lakes that stratify, the deep water may lack sufficient oxygen which forces the walleyes to suspend or use shallow water cover such as weed beds.

Toxic Gas
In many cases walleyes will suspend to avoid high levels of toxic gases that accumulate near the bottom. This happens during the summer months on calm sunny days when the maximum amount of sunlight penetration promotes decomposition of organic bottom sediments releasing carbon dioxide and methane gas. This moves walleyes higher in the water column, as much as up to 10 feet. On windy days when the water is churning this prevents the gases to accumulate so the walleyes need not suspend.

Post Cold Front Walleye
It’s no question that the toughest time to catch any species including the walleye is after a cold front. Blue bird skies and cool temperatures follow the front’s passage. This results in the walleye tightly hugging the lake bottom or buried into the weeds. Their feeding window is very limited if at all. When they do feed it will be short. Depending on the cold front severity it may take a number of days of stable weather to resume normal fishing activity.

WALLEYES_ON_THE_ROCKS

When faced in this situation here are a few tips that may improve your success.

  • There are two key points for Cold Front Walleye Live Bait & Super Slow
  • Fish very early in the day or in the evening. Cold front walleyes are best active during low light periods or night.
  • Fish deeper during the day: (5-10 feet) than normal as increased sunlight from cold front clear skies will drive walleye deeper
  • Downsize live bait:  Walleye are in lethargic state during a cold front, small live bait will work better than larger ones. Use 2″ fatheads than 4″ red tail chubs

Downsize jigs:  Try a 1/16 oz rather than an 1/8oz tipped with live bait. A lighter jig will drop slower and gives the walleye extra time to strike. Retrieve very slowly. Walleyes will not hit fast moving baits during this period.Attach a stinger hook to the jig: Many times a walleye will just nip the bait and let it go, with a stinger hook you will hook a good percentage of these short striking walleyes.

Go light on line
Cold front walleye are line shy, use 8 lb. clear monofilament or fluorocarbon.

Try Weeds
Some walleye will bury into the weeds rather than seek deeper water. These walleye will also resume normal activity before the walleye  in deeper water.

Murky Water
On shallow water lakes than have murky water stirred by strong north winds that usually come after a cold front, try fishing mid-day and shallower. The water temperature is the warmest and the level of sunlight is not a factor due to the water clarity.

Clear Lakes
If you’re fishing a clear water lake with no luck move to a river or stained lake because they are not affected as bad as clear water

Clear Water Walleye

26" WALLEYE

26″ WALLEYE

Fishing walleye on clear water lakes (Visibility 10 feet or Greater) is quite the challenge. Walleye in clear water are easily spooked by sound or movements (boats). On sunny days they will retreat to depths of 30 plus feet only to move up shallow to feed during early morning and evening hours. On windy chop or overcast days they follow the same dawn dusk patterns but some feeding occurs during the day.

The best suggestion we can offer you for walleye fishing clear water lakes is to keep your set-up presentation in a stealth mode and again keep noise and boat movement to a minimum. If you’re anchored keep the boat as far away as possible from the targeted structure while casting. For trolling use inline planer boards to spread the fishing lines 50 feet away from the boat.

If you’re using a live bait set-up keep the hooks as small as possible and use ultralight 10# test line on slip bobbers and slip sinker rigs. Jigs also produce well on clear water lakes but stay with natural colors black, purple and brown. The same goes for artificial lures, match the hatch that resembles the baitfish, black & silver, black & gold, and perch finishes rather than hot fluorescent colors. Long slender bodied minnow type lures will be the best performer.

Dark Water Walleye:

  • Walleye fishing on stained or dark water tends to be more consistent than on clear water lakes. This type of water is also less affected by weather changes, especially cold fronts. With the lack of sunlight walleyes will stay shallow most of time and are easier to locate and catch. If the visibility is less than one foot try bright and noisy artificial lures which are easier for the walleye to detect. If you prefer live bait add a fluorescent attractor or spinner.
  • The best fishing times on dark water is mid-day between 10:00-5:00 rather than dawn and dusk. The night bite is likely to be poor. Sunny calm days will out-perform cloudy windy days. The best lures for dark waters are crank baits that vibrate and have rattle chambers and inline spinners in fluorescent colors. Jigs will also work surprisingly well even though they do not produce any sound. Use fluorescent and glow in the dark (phosphorescent) colors tipped with live bait.

On stained lakes with visibility of 3 feet or greater, live bait set-ups are a better choice than artificial lures. Add a brightly colored attractor or spinner to your live bait rigs to help attract fish.

Locations
With weed growth on dark water and stained lakes being very limited find the weed edges and cast perpendicular to the edge. Shallow reefs and rock humps will also hold fish regularly.

Follow our HUNTING BLOG

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , ,

PIKE – Six Proven Lures To Use

White, yellow, and chartreuse are great pike lure colors, probably because they resemble the belly of a struggling food fish.

  1. IN-LINE SPINNER In early spring, before weed growth becomes a factor, focus on covering water. The bigger spinners are a top choice here because the weight lets you cast them farther and the blades throw more flash. Retrieve the spinner steadily, just fast enough to keep it off the bottom. Think Rooster Tail, Mepp’s, and Blue Fox spinners in 1/6- to 1-ounce sizes.
  2. SPOON Start by steadily and slowly reeling, just fast enough to keep the spoon wobbling. If that doesn’t produce, try a “flutter retrieve,” accomplished by imparting a jigging motion as you reel. Spoons are particularly effective along drop offs because you can precisely control the depth. Try Dardevles, Little Cleos, Thomas Buoyants, and Johnson Silver Minnows weighing ¼ to 1 ounce.

  3. 3. MINNOW-IMITATING PLUG Begin with a steady retrieve. If that doesn’t work, try stop-and-start reeling. Early in the season, use a shallow runner. As waters warm up, go to a crank bait or a soft-plastic swimbait that runs in the 10-foot range. You’ve got plenty to choose from here: the Rapala Original or Shad Rap, Rebel Minnow, Rattlin’ Rogue, C.C. Shad, Bomber Model A, Mann’s 1-Minus, and the Storm Wild-Eye Swim Shad.
  4. 4. SPINNERBAIT Draw a spinnerbait past sprouting weeds and stop the retrieve for a three count just as the bait approaches a possible hideout. Add a twist-tail or rubber-worm trailer for action and color contrast. Models abound. If I had to use only one pike lure, it would be a white spinnerbait with a trailer. If the water is a tall off-color, try a bait with a chartreuse skirt.

  5. JIG & a MINNOW or WORM As the temperature in the shallows reaches 60 degrees, pike begin to set up shop along 6- to 10-foot drop offs. These are best fished with a jig in full, 2-to 3-foot hops. Pike often take the jig as it drops; the strike may feel like a nibble or a perch bite. It’s not. Use bucktail and marabou jigs in the ¼- to1-ounce range.

  6. 6. SURFACE PLUG In late spring, fish top-water lures over weed beds in the calm water of morning or late afternoon. Over the years the combination of a slim minnow shape and propeller fuss has been most productive for me. Tie on a large (4½- to 6-inch) Jitterbug, Heddon’s Crazy Crawler or Dying Flutter, Storm Chug Bug, Smithwick Devil’s Horse, Sputter buzz, or Zara Spook.

Follow our HUNTING BLOG

Enter your email address to follow this blog and receive notifications of new posts by email.

 

 

Tags: , , , , , , , ,

Vertical Jigging for More Fish

vertical-jigging-1Vertical jigging can be an invaluable technique, especially when it is placed into the mix with trolling, casting and static-line methods. It can be another powerful weapon in the angler’s arsenal, but, unfortunately, it is perhaps not used as frequently as it should be.

The advocates of vertical jigging state that not only is it a fun-filled way to while away the hours, but it is also a highly productive way to fish. Many anglers dramatically increase their success rate when they begin to use a vertical jig.

In fact, in some locations, vertical jigging is not simply one of the beneficial tactics, but it is the most productive method of fishing for walleye. The advantages of vertical jigging are numerous. For example, it is widely accepted as a cost-effective technique. In addition, it only requires a small amount of physical exertion and, most importantly, it is a basic approach that can be adopted by anybody.

The success of vertical jigging is made possible through the accuracy of the technique. Rather than trolling wide expanses of water, it is required that the angler does a little research first. By establishing the structure of the lake or river that you are fishing in, you can locate the positions that are most likely to contain the walleye. Of course, if you have radar equipment, then you will find pinpointing the walleye spots even more easy, but this is not necessary and a comprehensive map of the water should be sufficient.

vertical

There will be times when establishing the position of the fish leads you to the deep sections of the lake or river. If you are fishing for walleye in particularly deep waters, you may wish to consider using a partial glow head and spinner blade on your jig, as this is a great combination for deep fishing or trolling.

In terms of bait, when it comes to vertical jigging it really is a matter of choice. Any bait can be used, so, if you find that minnows, crawlers or leeches work best for you then, by all means, use any of those. Personal preference is such a large part of successful fishing.

More good news for beginners is that vertical jigging can allow for a margin of error. In other words, if you have let a walleye get away, but you know it is still under your boat, the vertical rig allows you to get right under the boat to try for a second chance. With many presentations, you may not expect to get a bite until the bait has reached the lakebed. However, with the vertical jig, you are just as likely to find success as the bait is on its way down. Subsequently, it is always a good idea to be prepared for those walleye.

Vertical jigging, or V-jigging as it is sometimes known, is an extremely enjoyable way to fish. It relies heavily on skill and technique, which is hugely satisfying for an angler. However, that does not mean to say that it is difficult to learn. Even beginners can take to vertical jigging and can be extremely successful with this method.

Follow our HUNTING BLOG

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , ,

Using Leeches & Worms + VIDEO

 LEECHES AND NIGHTCRAWLERS

DSCN0821Leeches and night-crawlers are favorite foods of the walleye because they are natural offerings in most waters and walleye are accustomed to feeding on them.

When presented properly they are irresistible. A stretched out, wiggling leech bouncing  along just over the bottom of a gravel bar or weed bed, will make even the most finicky walleye take a second look, turn around and zero in on target,   mouth open and taste buds tingling.

Hook the sucker end of the leech to the first hook of a spinner rig and place the tail section on the last hook. Place it in the water and pull it at the same speed you are   going to troll or retrieve at and look for the size, movement and or roll of the leech. It should run straight not roll up into a nondescript little ball; this does not attract walleye. When you have the leech trailing the way you want it’s time to add a few light split shots to get it down to the desired depth. By placing the split shot about eighteen inches to two feet in front of the hook you should be within six inches of bottom with the leech as you troll or retrieve, and you won’t have to run a whole lot of line out behind the boat.

Night-crawlers are attached to your spinner rigs in the same way. Again, make sure they are stretched out along the rig so they trail out on the retrieve. Choose the   largest and fattest worms available.

COLOUR

The spinner rig can be purchased at a local tackle shop and comes in many variations of size and  colors.

A simple rule to remember when faced with color choices is: bright days + clear water = silver spinner is a very good choice.  Darker water or cloudy days try a fluorescent or gold spinner are other good choices

The beads most often used are red with white, or yellow; try mixing the colors until you come up with the pattern that works best for you.

SPEED.

Try slow trolling or retrieving the leech at a fairly fast pace at first to take advantage of more aggressive fish.   Remember that you should troll according the weather system.

Meaning:
Bright, clear day:  troll slow or even jig
Cloudy, rainy day:  Troll faster and a willow leaf blade is a very good choice

A rate of about half again the normal trolling speed usually works well.  Keep track of where the fish are hitting and come back over these same spots again but a little slower this time to take   advantage of the less aggressive fish. Remember that it is not always the larger fish that are most aggressive and by fishing back you can add considerably to your stringer.

CASTING

Having reached the place you are going to fish, maybe a shoal or weed bed that you have had some luck on before, try fan casting. Start at a right angle to where you are standing facing the water. Throw the first cast to the right and keep working  to the left until you have gone in a complete arch to the other end. This will allow you to cover every bit of the water facing you. Now move down until you are at the edge of the spot you covered last and start the same procedure over again. When you have worked your way to the end of the area that you wanted to fish, you will have covered the area correctly.

Inlets are a good place to practice this pattern of casting, especially early season as the walleye are quite often in this area looking for small, early baitfish or crustaceans. By fan casting you can cover this entire area of water.

The above methods have consistently proven to be successful for opening season walleye.   So get your live bait and be ready for a fun day on the lake.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , ,

 
%d bloggers like this: