RSS

Category Archives: Pike Spinnerbaits

15 Top Lures For Pike Fishing

2
When the stars align and the feeding window is open, a big  pike will hit anything that moves. Your bait selection doesn’t matter and all you have to do is be in the right place at the right time. If you’re lucky, you’ll experience this feeding-frenzy action once or twice a season. The rest of your time hunting trophy pike will be spent cranking, casting, and waiting. The right presentation will make the difference between a bite and a follow-up. So, don’t waste all of your effort pitching second-rate lures. Here’s our round up of the best pike fishing baits on the market right now.

Heddon Rattlin’ SpookPMlures_01The Spook’s renowned walk-the-dog style has long been a pike pleaser – especially over grass. The Rattlin’ model’s tungsten BBs emit an intense sound that mimics fleeing baitfish. These rattles also serve to enhance the bait’s walking retrieve. ($6.99, Lurenet.com)

Booyah Pikee

PMlures_02Strong and durable, this ½-ounce double willow leaf spinnerbait boasts a tough Vibra-Flx wire frame that stands up to powerful jaws with lots of teeth. The Pikee comes with a 12-inch steel leader for added insurance against big biters. ($5.99, Lurenet.com)

YUM DingerPMlures_03
The 7-inch version of this flexible stickbait does a good job of presenting a baitfish profile for pike and musky. Rig the bait Texas style over weeds or wacky style when working open water. ($5.79, Lurenet.com)

Eppinger Daredevle SpoonPMlures_04a

The 00 size of this classic spoon has seen plenty of teeth mark, and for good reason. The wiggling, wobbling action puts out a lot of flash and vibration to resemble a fleeing baitfish. Trolled or cast, the Daredevle tempts pike and musky in a broad range of depths. ($9.70, Eppinger.net)

Blue Fox Super BouPMlures_05
Big on the visuals and big on fish-grabbing ability, the size 10 Super Bou imitates mature baitfish and sprouts double trebles to snare the toothy predators that seek them. Tandem blades, combined with Marabou, Hackle and Flashabou fibers create a lifelike undulating action, while the free-turning brass gear emits sonic vibration and rattles when it strikes the outer shell. ($21.69, Rapala.com)

Mepps H210PMlures_06
There’s nothing modest about this heavyweight tandem spinner, but big muskies don’t do modest. Nine inches from eye to tail, the 3-ounce H210 emits big-time thump with its twin brass Indiana blades, while a bright 100-percent holographic tail is hand-tied to tandem 7/0 VMC cone cut hooks. ($39.80, Mepps.com)

Suick Weighted Holographic Musky Thriller Jerkbait

PMlures_07
The weighted version of the original Musky Thriller carries its unique shape and enticing wiggle deeper. Holographic finishes shimmer like real baitfish. ($27.70, Suick.com)

Tackle Industries Super D Swimbait
PMlures_08

A whopping 14-inches long with its tail extended, this sturdy swimbait is built around a full Body Lock coil harness that keeps the soft plastic body in place, while connecting two underside trebles to the frame linked to jig head. The 5-ounce Super D counts down at about a foot per second. Jig it, jerk it or crank it; the Super D’s rocking motion and curly tail put on a big show for big muskies. ($13.99, TackleIndustries.com)

Mepps Double Blade Aglia (Size #5)

PMlures_09
The popular Aglia design gains enhanced visual appeal, along with maximum sound and vibration from a second blade. Whether it’s flashing metallic blades or contrasting colors, the dual spinners provide added lift for fishing over weeds or other structure. Vividly colored hand-tied bucktails help make this bait easier for fish to spot. ($6.99, Mepps.com)

Mepps Syclops (Size #3)
PMlures_10a

A real pike pleaser, this sleekly contoured spoon casts easily and trolls effectively at most any common speed. Jig it vertically over deep spots or through the ice. ($4.75, Mepps.com)

Grandma Jointed Lure
PMlures_11b

An old-school classic, the flat body and jointed design yields a wobble and shimmy that drives big muskies crazy. When cast, the bait reaches 3-6 feet; trolled, it goes to 12. Made with high-impact plastic and a tough diving lip, a Grandma will withstand the fiercest attack from a toothy giant. ($17.99, Grandmalures.com)

Northland Fishing Tackle Bionic Bucktail Jig
PMlures_12

Hand-tied with genuine bucktail, this jig features a versatile double line tie that affords the option of vertical jigging deep water or casting and trolling shallow cover. A stinger hook secured to the jig’s Mustad Ultra-Point hook snares any short strikers. ($5.99, Northlandtackle.com)
Cisco Kid Topper
PMlures_13

A torpedo profile body with stainless steel propeller blades on the nose and tail create a big topside disturbance that gets the fish looking in the right direction. Effective for pike and muskie, the Cisco Kid Topper works well at a variety of speeds. ($17.95, Suick.com)

Bass Pro Shops Thump N Deal Swimbait
PMlures_14a

Equipped with a pair of 4/0 short shank trebles, this big bait swims with a slight side-to-side wobble that can be altered by bending and adjusting the internal non-slip body harness. A steady retrieve works best, but an occasional pause or twitch can turn followers into biter. ($17.99, Basspro.com)

Koppers Live Target Jointed Yellow Perch
PMlures_15

Incredibly realistic body shaping, coloration and fishy detail makes this a hard bait for big predators to ignore. Effective for casting or trolling, the jointed body creates an erratic tail kick that closely mimics the swimming motion of a real perch.  ($12.99, KoppersFishing.com)

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , , , , ,

WHAT YOU NEED TO KNOW ABOUT SPINNERS

In Line, Spinnerbaits, Buzzbaits,  Livebait Spinners1

Spinners refers to a family of fishing lures that have a metal shaped blade(s) attached to the wire of the lure. When the lure is in motion the blade spins creating varying degrees of flash and vibration that mimics small fish. Spinners will catch all types of game fish. Fish can see the flash of the revolving blade in clear or stained water, in dark or murky water they will use their lateral-line to feel the vibration from the turning blade. Spinners are relatively easy to use, they will catch fish with a simple straight retrieve, and when a fish strikes a spinner usually it will usually hook itself.

Spinners have four basic designs, first is the standard inline that have a blade or blades that rotate around a straight wire using a clevis, most all inline spinners have a weight on the wire to make the spinner heavy enough to cast. Second are spinnerbaits, this spinner is shaped like an open safety pin. They will have a lead head molded on the lower arm and a spinner attached on the upper arm using a swivel, some models have multiple blades that are attached on the upper arm using a clevis and a bead stop. Third are buzzbaits, they are similar to a spinnerbait or a inline spinner but have a specially designed rotating propeller for surface fishing. Fourth are live bait spinners that use night crawlers or minnows on a hook or a series of hooks with a spinner blade in front of the live bait.

Understanding Blade Styles

The main fish attracting component of a spinner is the blade. The type of blade and shape will determine the depth and sound (the thump) of a spinner upon retrieve. All blades have a different amount of resistance as it travels through the water. A broad blade such as the Colorado will rotate at a greater outward angle from the wire shaft producing a lift and thump compared to a narrow willow blade which will run tighter to the shaft and spin faster producing less sound.

2

1.Colorado 2.Indiana 3.Indiana Fluted 4.Turtle Back 5.French 6.Inline 7.Willow

From the image above the Colorado will run the highest in the water producing the most vibration. The Indiana, Fluted, Turtle Back and French are intermediate styles running at mid range depth levels used for slow to medium retrieves in light river current or lakes. The Inline and Willow run the deepest as they spin tightest to the wire shaft. These are good for fast retrieves in swift conditions, and deeper water presentations. In using spinnerbait’s the willow blade is a good choice around vegetation and cover as they revolve tight to the upper arm catching less floating debris and weeds.

Blade Sizes 

3The sizes of spinner blades are based on a numerical system starting with 0 or 0/0, the smallest for stream trout spinners, size 3-4-5 for bass and pike up to the 7-8 for muskies along with the new popular magnum 10. The larger the blade size the more water resistance and vibration when compared to the same shape in a smaller version.

Multiple Bladed Spinners

Many of the spinners today offer double blade options. The inline spinner that has two blades is commonly referred as a bulger which rides high in the water even breaking (bulging) the surface when retrieved rapidly. Spinnerbaits that have 2  blades in “tandem” provide more flash which gives the image of schools of bait fish.

Blade Colors

There are countless blade finishes, colors and combinations for spinners today on the market, the most common are metallic hues with silver, gold and copper which provides a flash to sight-feeding predators in clear or stained water. Painted blades flash less but create more underwater contrast. They can be particularly effective during low-light conditions or in murkier water.

Spinner Tails, Skirts and Dressings

Tying materials to the tail of a inline spinner or silicone skirts on spinner baits adds a realistic appearance and increases the profile of the lure as it swims through the water. The dressed tail also provides lift and resistance enabling the angler to retrieve the lure at a slower rate. Years back traditional hook dressings on spinners have been animal hair (deer hair, squirrel tails and “marabou” from chickens) with a few feathers as attractors especially red. With the advancement of synthetics materials such as flashabou and silicone skirts adds a fluttering flash in different incandescent or solid colors increasing the total flash profile of the spinner.

Spinner bait skirts over the years also evolved from the solid living rubber colors to silicone skirts because of all the available molded-in patterns, metal flakes, and incandescent colors.

Depending on personal preferences and fishing conditions many anglers prefer to use an undressed spinner for speed and depth relying on the blade flash and vibration as the only attractors. Other options are soft plastic tail dressings such as an imitation minnow or tailed grub. Soft plastics are also used on traditional dressed spinners tails to change the appearance, profile and action of the lure, these are known as trailers.

Listed below is a reference guide to help you identify the common types of spinners and how they are used:

Types of Spinners: 

Inline

4

The traditional inline spinner shown in three variations (Top) French Blade Dressed Deer Hair Tail (Middle) French Blade Plain Undressed (Bottom) Willow Blade Soft Plastic Imitation Minnow Tail.

Double Bladed Inline

5

By combining two blades together adds vibration and lift upon the retrieve for shallow water. Shown with double Colorado blades and marabou tail that pulses in the water, also known as a “Bulger”

Flash Inline

6

With the popularity of synthetic material used for spinner tails adds additional flash to the profile (body) of the lure. The top is tied with flashabou (tinsel) the bottom is a round silicone glitter skirt, both tails pulsates and sparkle upon the retrieve

Magnum Double Blade Inline

7

Similar to the double bladed inline only with larger spinner blades (size 9-13) providing maximum vibration and lift. Very popular lure for northern pike.

Spinnerbaits

8

Versatility is what spinnerbaits are all about. With the open safety pin, weighted head and single hook design that runs vertical, it can be fished in and through vegetation (weedless) Slow rolled over cover, allowing it to sink, the blades will helicopter down to deeper water. Used for all gamefish.

Magnum Spinnerbaits

9

A beefed up version of the spinner bait for big pike and muskies. The magnum spinner bait comes in 1 oz and up to 6 oz’s using large blades for increased vibration and large body profiles for big fish.

Buzzbaits

Buzzbaits resemble either a standard spinnerbait or inline spinner with the exception of a rotating propeller blade replacing a flat blade. Buzzbaits are a topwater spinner and must be retrieved rapidly to produce a loud clacking sound as they move across the surface. Excellent lure for bass and pike.

Buzzbaits resemble either a standard spinnerbait or inline spinner with the exception of a rotating propeller blade replacing a flat blade. Buzzbaits are a topwater spinner and must be retrieved rapidly to produce a loud clacking sound as they move across the surface. Excellent lure for pike.

Live Bait Spinners

11By combining the vibration and flash of a spinner blade and the attraction of live bait, these produce an effective fish catching combination for most all species of game fish. The (top) is a weight forward spinner that is tipped with a night crawler, this spinner is cast and retrieved, primarily used on the Great Lakes for walleyes also known as the trade name erie dearie. The (middle) is a crawler harness with multiple hooks (2 or 3) and is also tipped with a night crawler, this spinner is rigged on bottom bouncers and sliding sinker rigs, for trolling of drifting. A single hook version is also used for minnows. The (bottom) is a strip on an old time fishing rig also called Prescott Spinner. Made from stiff wire with a rotating blade on front. The wire is slid through a minnow attaching a double hook on the end loop.

 

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Fall PIKE Fishing

31The Ontario archery hunting season will be open mid-September and it’s a tortuous time of year, because the urge to hunt is so strong after a long off-season. Yet, while the bush beckons the hunters, Wawang Lake is still here – promising what is arguably the best fishing of the whole year!

That’s because the cool autumn months before winter are prime days to catch fish, and BIG fish, in generous quantities. Why? Because fish feed more voraciously during the fall than any other time of year. They instinctively know that winter’s coming, marking a cold-water period of low activity. So, predator fish bulk up for winter by packing in as much eating as they can. This time also coincides with the fall spawn of baitfish.

Basically, the baitfish school-up to move into the spawning grounds and the predator fish follow them.

One such predator in the mix of the fall bite is the magnificent Northern Pike.  As anyone who knows Wawang Lake – it’s stuffed with these jaw, snapping monsters! Our pike hunters love the way they look, strike and fight. They have the attitude of a pitbull on steroids! Even a 3-4 pounder can give any angler a thrill. Add twenty pounds and you have a serious freshwater battle on your hands.

One of the best ways to catch a bunch of pike in the fall is by trolling and covering a lot of water. Before hitting the water, have a game plan. Study the Wawang Lake map of the lake and identify the steep breaks where shallow water drops off into deep structure. These are potential hotspots.

If the shallows in these spots are weedy, look for weedlines that are still green. Weeds that have already laid down and are beginning to decay do not hold fish like they did in the summertime. Fish like GREEN weeds, for the leafy cover they provide, and dying weeds don’t offer the same concealment. On a particular weedline, the top fish-holding locations are points and inside turns. These are key ambush areas at any time of year, including fall.

If the lake has no green living weeds, then other types of cover are your next best bet. Rocks are ALWAYS dynamite areas to target big pike, particularly if they’re out on a nice point. Add wind ripping into or over that point, and you’ve got a perfect recipe for big gators laying in wait. The wind creates current that pushes bait into the point, where opportunistic feeders are always hanging around After determining which weedlines, rocks, points, etc. that you intend to target, the next decision to make is lure selection. During the fall, northern pike like to eat big meals. So opt for baits that have a large profile.
564681_10151012137062581_668998774_n

Lure suggestions to start with: ·

  • a big jerkbait like a 9-inch Suick in Firetiger, Perch or Red/White – always clipped to a steel leader. ·
  • 10″ Swimming Joe (Bucher) baits in firetiger, perch, or walleye – a proven overall best
  • Other proven performers are big spoons, paddle-tailed swim baits and bucktails. ·
  • If picking up stray weeds is a problem, troll a jumbo spinnerbait or weedless spoon like a Johnson Silver Minnow.   ·
  • Add a large twist-tail grub body to the shank hook on spinnerbaits and Silver Minnows, to increase the size of the bait’s profile, enhance vibration and for a splash of color.

Once you get on a weedline depth (typically 10-15 feet), watch your sonar and stay on that contour. Pike aren’t afraid to hit a fast-moving bait, so I usually begin with a troll speed of about 2.5 miles per hour. If that doesn’t get results, try slower or faster speeds – even up to around 5 miles per hour even.

Leave your rod holders at home when trolling for pike, because you’ll get a lot more bites if you continually work the lure with quick, hard jerks; steady pull-and-drop movements; and erratic twitching. Pike will routinely follow behind a bait, and the instant it “pauses” it often triggers an aggressive strike!

41

Fast trolling regularly results in an immediate hook-up, especially if you’re using no-stretch braided line instead of monofilament. However, we prefer braid for trollling, because the line transmits the wobble of the lure to your hand and lets you know if the bait is running properly or whether you’ve picked up a stray weed.

The fall trolling pattern for northern pike can provide you with some of the most action-packed fishing of the year. Handle the fish with care and release them healthy so they go into the winter months stress-free. And don’t be afraid to keep a couple of 3-4 pounders for the dinner table. Pike is an amazing fish to eat, especially if you de-bone it to remove those nuisance “Y” bones. Or, leave the bones in and opt for pickling instead. The pickling process turns the bones to mush, and there’s a better than pickled northern pike!

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , , , , ,

Fall PIKE Fishing

31The Ontario archery hunting season will be open mid-September and it’s a tortuous time of year, because the urge to hunt is so strong after a long off-season. Yet, while the bush beckons the hunters, Wawang Lake is still here – promising what is arguably the best fishing of the whole year!

That’s because the cool autumn months before winter are prime days to catch fish, and BIG fish, in generous quantities. Why? Because fish feed more voraciously during the fall than any other time of year. They instinctively know that winter’s coming, marking a cold-water period of low activity. So, predator fish bulk up for winter by packing in as much eating as they can. This time also coincides with the fall spawn of baitfish.

Basically, the baitfish school-up to move into the spawning grounds and the predator fish follow them.

One such predator in the mix of the fall bite is the magnificent Northern Pike.  As anyone who knows Wawang Lake – it’s stuffed with these jaw, snapping monsters! Our pike hunters love the way they look, strike and fight. They have the attitude of a pitbull on steroids! Even a 3-4 pounder can give any angler a thrill. Add twenty pounds and you have a serious freshwater battle on your hands.

One of the best ways to catch a bunch of pike in the fall is by trolling and covering a lot of water. Before hitting the water, have a game plan. Study the Wawang Lake map of the lake and identify the steep breaks where shallow water drops off into deep structure. These are potential hotspots.

If the shallows in these spots are weedy, look for weedlines that are still green. Weeds that have already laid down and are beginning to decay do not hold fish like they did in the summertime. Fish like GREEN weeds, for the leafy cover they provide, and dying weeds don’t offer the same concealment. On a particular weedline, the top fish-holding locations are points and inside turns. These are key ambush areas at any time of year, including fall.

If the lake has no green living weeds, then other types of cover are your next best bet. Rocks are ALWAYS dynamite areas to target big pike, particularly if they’re out on a nice point. Add wind ripping into or over that point, and you’ve got a perfect recipe for big gators laying in wait. The wind creates current that pushes bait into the point, where opportunistic feeders are always hanging around After determining which weedlines, rocks, points, etc. that you intend to target, the next decision to make is lure selection. During the fall, northern pike like to eat big meals. So opt for baits that have a large profile.
564681_10151012137062581_668998774_n

Lure suggestions to start with: ·

  • a big jerkbait like a 9-inch Suick in Firetiger, Perch or Red/White – always clipped to a steel leader. ·
  • 10″ Swimming Joe (Bucher) baits in firetiger, perch, or walleye – a proven overall best
  • Other proven performers are big spoons, paddle-tailed swim baits and bucktails. ·
  • If picking up stray weeds is a problem, troll a jumbo spinnerbait or weedless spoon like a Johnson Silver Minnow.   ·
  • Add a large twist-tail grub body to the shank hook on spinnerbaits and Silver Minnows, to increase the size of the bait’s profile, enhance vibration and for a splash of color.

Once you get on a weedline depth (typically 10-15 feet), watch your sonar and stay on that contour. Pike aren’t afraid to hit a fast-moving bait, so I usually begin with a troll speed of about 2.5 miles per hour. If that doesn’t get results, try slower or faster speeds – even up to around 5 miles per hour even.

Leave your rod holders at home when trolling for pike, because you’ll get a lot more bites if you continually work the lure with quick, hard jerks; steady pull-and-drop movements; and erratic twitching. Pike will routinely follow behind a bait, and the instant it “pauses” it often triggers an aggressive strike!

41

Fast trolling regularly results in an immediate hook-up, especially if you’re using no-stretch braided line instead of monofilament. However, we prefer braid for trollling, because the line transmits the wobble of the lure to your hand and lets you know if the bait is running properly or whether you’ve picked up a stray weed.

The fall trolling pattern for northern pike can provide you with some of the most action-packed fishing of the year. Handle the fish with care and release them healthy so they go into the winter months stress-free. And don’t be afraid to keep a couple of 3-4 pounders for the dinner table. Pike is an amazing fish to eat, especially if you de-bone it to remove those nuisance “Y” bones. Or, leave the bones in and opt for pickling instead. The pickling process turns the bones to mush, and there’s a better than pickled northern pike!

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , , , , ,

15 Top Lures For Pike Fishing

2
When the stars align and the feeding window is open, a big  pike will hit anything that moves. Your bait selection doesn’t matter and all you have to do is be in the right place at the right time. If you’re lucky, you’ll experience this feeding-frenzy action once or twice a season. The rest of your time hunting trophy pike will be spent cranking, casting, and waiting. The right presentation will make the difference between a bite and a follow-up. So, don’t waste all of your effort pitching second-rate lures. Here’s our round up of the best pike fishing baits on the market right now.

Heddon Rattlin’ SpookPMlures_01The Spook’s renowned walk-the-dog style has long been a pike pleaser – especially over grass. The Rattlin’ model’s tungsten BBs emit an intense sound that mimics fleeing baitfish. These rattles also serve to enhance the bait’s walking retrieve. ($6.99, Lurenet.com)

Booyah Pikee

PMlures_02Strong and durable, this ½-ounce double willow leaf spinnerbait boasts a tough Vibra-Flx wire frame that stands up to powerful jaws with lots of teeth. The Pikee comes with a 12-inch steel leader for added insurance against big biters. ($5.99, Lurenet.com)

YUM DingerPMlures_03
The 7-inch version of this flexible stickbait does a good job of presenting a baitfish profile for pike and musky. Rig the bait Texas style over weeds or wacky style when working open water. ($5.79, Lurenet.com)

Eppinger Daredevle SpoonPMlures_04a

The 00 size of this classic spoon has seen plenty of teeth mark, and for good reason. The wiggling, wobbling action puts out a lot of flash and vibration to resemble a fleeing baitfish. Trolled or cast, the Daredevle tempts pike and musky in a broad range of depths. ($9.70, Eppinger.net)

Blue Fox Super BouPMlures_05
Big on the visuals and big on fish-grabbing ability, the size 10 Super Bou imitates mature baitfish and sprouts double trebles to snare the toothy predators that seek them. Tandem blades, combined with Marabou, Hackle and Flashabou fibers create a lifelike undulating action, while the free-turning brass gear emits sonic vibration and rattles when it strikes the outer shell. ($21.69, Rapala.com)

Mepps H210PMlures_06
There’s nothing modest about this heavyweight tandem spinner, but big muskies don’t do modest. Nine inches from eye to tail, the 3-ounce H210 emits big-time thump with its twin brass Indiana blades, while a bright 100-percent holographic tail is hand-tied to tandem 7/0 VMC cone cut hooks. ($39.80, Mepps.com)

Suick Weighted Holographic Musky Thriller Jerkbait

PMlures_07
The weighted version of the original Musky Thriller carries its unique shape and enticing wiggle deeper. Holographic finishes shimmer like real baitfish. ($27.70, Suick.com)

Tackle Industries Super D Swimbait
PMlures_08

A whopping 14-inches long with its tail extended, this sturdy swimbait is built around a full Body Lock coil harness that keeps the soft plastic body in place, while connecting two underside trebles to the frame linked to jig head. The 5-ounce Super D counts down at about a foot per second. Jig it, jerk it or crank it; the Super D’s rocking motion and curly tail put on a big show for big muskies. ($13.99, TackleIndustries.com)

Mepps Double Blade Aglia (Size #5)

PMlures_09
The popular Aglia design gains enhanced visual appeal, along with maximum sound and vibration from a second blade. Whether it’s flashing metallic blades or contrasting colors, the dual spinners provide added lift for fishing over weeds or other structure. Vividly colored hand-tied bucktails help make this bait easier for fish to spot. ($6.99, Mepps.com)

Mepps Syclops (Size #3)
PMlures_10a

A real pike pleaser, this sleekly contoured spoon casts easily and trolls effectively at most any common speed. Jig it vertically over deep spots or through the ice. ($4.75, Mepps.com)

Grandma Jointed Lure
PMlures_11b

An old-school classic, the flat body and jointed design yields a wobble and shimmy that drives big muskies crazy. When cast, the bait reaches 3-6 feet; trolled, it goes to 12. Made with high-impact plastic and a tough diving lip, a Grandma will withstand the fiercest attack from a toothy giant. ($17.99, Grandmalures.com)

Northland Fishing Tackle Bionic Bucktail Jig
PMlures_12

Hand-tied with genuine bucktail, this jig features a versatile double line tie that affords the option of vertical jigging deep water or casting and trolling shallow cover. A stinger hook secured to the jig’s Mustad Ultra-Point hook snares any short strikers. ($5.99, Northlandtackle.com)
Cisco Kid Topper
PMlures_13

A torpedo profile body with stainless steel propeller blades on the nose and tail create a big topside disturbance that gets the fish looking in the right direction. Effective for pike and muskie, the Cisco Kid Topper works well at a variety of speeds. ($17.95, Suick.com)

Bass Pro Shops Thump N Deal Swimbait
PMlures_14a

Equipped with a pair of 4/0 short shank trebles, this big bait swims with a slight side-to-side wobble that can be altered by bending and adjusting the internal non-slip body harness. A steady retrieve works best, but an occasional pause or twitch can turn followers into biter. ($17.99, Basspro.com)

Koppers Live Target Jointed Yellow Perch
PMlures_15

Incredibly realistic body shaping, coloration and fishy detail makes this a hard bait for big predators to ignore. Effective for casting or trolling, the jointed body creates an erratic tail kick that closely mimics the swimming motion of a real perch.  ($12.99, KoppersFishing.com)

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , , , , ,

The Best Lures for Northern Pike

DSCN4408

luresNorthern pike are exceptional game fish, known for their propensity to hit lures with heart-stopping ferocity and to engage in epic battles once hooked. But northern pike can also be finicky, so being well-prepared with a variety of lures increases your chances for success. An assortment of spoons, spinners, crankbaits and topwater lures should be in the arsenal of every northern pike angler.

Spoons

imagesCACC7OPN

Spoons are most effective because of their wiggling, vibrating movement in the water and the flashes of light that reflect off their metal surfaces. Spoons come in all manner of shapes, sizes and colors, but a good fundamental choice is a spoon of about 4 to 6 inches in length. The color to use varies with water clarity, but, according to “Game and Fish” magazine, red and white spoons are often the best combination to start with. The weight of the spoon determines the depth at which it runs. Heavier, thicker spoons sink faster and run deeper. They are also the best choice for trolling. Dardevle spoons, made by Eppinger, have long been a top choice for anglers. Spoons are generally used with a cast-and-retrieve routine or are trolled, but they are versatile enough to use as jigs or, when retrieved quickly, as surface lures.

Spinnerbaits

spinner-bait-diagram
Spinnerbaits are effective because of the fish-attracting vibrations and light flashes they create when retrieved or trolled. Spinners consist of shiny metal blades with a clevis that spins around a wire shaft. Spinnerbaits often are “dressed” in hair (bucktails), feathers, rubber or fur to increase their attractiveness to northern pike. Anglers often add a soft, plastic-bodied, twister tail, either as a trailer hook (to catch short-striking northerns) or to the treble hook itself. Mepps makes high-quality spinnerbaits in a huge variety of sizes, shapes and variations.

Crankbaits

imagesCAQ2U1JD

Crankbaits are lures designed to resemble bait fish, and you can fish them either by casting and retrieving or trolling behind the boat. Some are designed to run shallow, and some run deep. The experts at Pike Lures.com comment that the majority of crankbaits are manufactured out of plastic, but some companies still use the traditional wooden bodies. Either is a good choice. Generally, a crankbait is painted with a pattern and color that closely matches that of the species upon which the pike feeds, but, sometimes, a wild and unnatural color works even better. Rapala is one of the premier makers of crankbaits, available in either wood or plastic, in a wide variety of sizes and shapes.

Topwater

imagesCAQL6WK0
Topwater lures are about the most exciting type of lure to use for northern pike fishing. Topwaters are designed to create surface commotion, in imitation of a dying fish or swimming animal. Northerns hit these lures explosively at the surface, creating a large and startling splash. Stickbaits, buzzbaits, propeller baits and crawlers are typical variations on the topwater theme, with movement dictated by the angler’s manipulation of the fishing rod. Heddon Company has made such lures since 1894 and continues to produce popular and effective topwater lures.

 

Join us at Wawang Lake Resort for some OUTSTANDING fishing!

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

 

Tags: , , , , , , , , , , , ,

Fishing Spinners

In Line, Spinnerbaits, Buzzbaits,  Livebait Spinners1

Spinners refers to a family of fishing lures that have a metal shaped blade(s) attached to the wire of the lure. When the lure is in motion the blade spins creating varying degrees of flash and vibration that mimics small fish. Spinners will catch all types of game fish. Fish can see the flash of the revolving blade in clear or stained water, in dark or murky water they will use their lateral-line to feel the vibration from the turning blade. Spinners are relatively easy to use, they will catch fish with a simple straight retrieve, and when a fish strikes a spinner usually it will usually hook itself.

Spinners have four basic designs, first is the standard inline that have a blade or blades that rotate around a straight wire using a clevis, most all inline spinners have a weight on the wire to make the spinner heavy enough to cast. Second are spinnerbaits, this spinner is shaped like an open safety pin. They will have a lead head molded on the lower arm and a spinner attached on the upper arm using a swivel, some models have multiple blades that are attached on the upper arm using a clevis and a bead stop. Third are buzzbaits, they are similar to a spinnerbait or a inline spinner but have a specially designed rotating propeller for surface fishing. Fourth are live bait spinners that use night crawlers or minnows on a hook or a series of hooks with a spinner blade in front of the live bait.

Understanding Blade Styles

The main fish attracting component of a spinner is the blade. The type of blade and shape will determine the depth and sound (the thump) of a spinner upon retrieve. All blades have a different amount of resistance as it travels through the water. A broad blade such as the Colorado will rotate at a greater outward angle from the wire shaft producing a lift and thump compared to a narrow willow blade which will run tighter to the shaft and spin faster producing less sound.

2

1.Colorado 2.Indiana 3.Indiana Fluted 4.Turtle Back 5.French 6.Inline 7.Willow

From the image above the Colorado will run the highest in the water producing the most vibration. The Indiana, Fluted, Turtle Back and French are intermediate styles running at mid range depth levels used for slow to medium retrieves in light river current or lakes. The Inline and Willow run the deepest as they spin tightest to the wire shaft. These are good for fast retrieves in swift conditions, and deeper water presentations. In using spinnerbait’s the willow blade is a good choice around vegetation and cover as they revolve tight to the upper arm catching less floating debris and weeds.

Blade Sizes 

3The sizes of spinner blades are based on a numerical system starting with 0 or 0/0, the smallest for stream trout spinners, size 3-4-5 for bass and pike up to the 7-8 for muskies along with the new popular magnum 10. The larger the blade size the more water resistance and vibration when compared to the same shape in a smaller version.

Multiple Bladed Spinners

Many of the spinners today offer double blade options. The inline spinner that has two blades is commonly referred as a bulger which rides high in the water even breaking (bulging) the surface when retrieved rapidly. Spinnerbaits that have 2  blades in “tandem” provide more flash which gives the image of schools of bait fish.

Blade Colors

There are countless blade finishes, colors and combinations for spinners today on the market, the most common are metallic hues with silver, gold and copper which provides a flash to sight-feeding predators in clear or stained water. Painted blades flash less but create more underwater contrast. They can be particularly effective during low-light conditions or in murkier water.

Spinner Tails, Skirts and Dressings

Tying materials to the tail of a inline spinner or silicone skirts on spinner baits adds a realistic appearance and increases the profile of the lure as it swims through the water. The dressed tail also provides lift and resistance enabling the angler to retrieve the lure at a slower rate. Years back traditional hook dressings on spinners have been animal hair (deer hair, squirrel tails and “marabou” from chickens) with a few feathers as attractors especially red. With the advancement of synthetics materials such as flashabou and silicone skirts adds a fluttering flash in different incandescent or solid colors increasing the total flash profile of the spinner.

Spinner bait skirts over the years also evolved from the solid living rubber colors to silicone skirts because of all the available molded-in patterns, metal flakes, and incandescent colors.

Depending on personal preferences and fishing conditions many anglers prefer to use an undressed spinner for speed and depth relying on the blade flash and vibration as the only attractors. Other options are soft plastic tail dressings such as an imitation minnow or tailed grub. Soft plastics are also used on traditional dressed spinners tails to change the appearance, profile and action of the lure, these are known as trailers.

Listed below is a reference guide to help you identify the common types of spinners and how they are used:

Types of Spinners: 

Inline

4

The traditional inline spinner shown in three variations (Top) French Blade Dressed Deer Hair Tail (Middle) French Blade Plain Undressed (Bottom) Willow Blade Soft Plastic Imitation Minnow Tail.

Double Bladed Inline

5

By combining two blades together adds vibration and lift upon the retrieve for shallow water. Shown with double Colorado blades and marabou tail that pulses in the water, also known as a “Bulger”

Flash Inline

6

With the popularity of synthetic material used for spinner tails adds additional flash to the profile (body) of the lure. The top is tied with flashabou (tinsel) the bottom is a round silicone glitter skirt, both tails pulsates and sparkle upon the retrieve

Magnum Double Blade Inline

7

Similar to the double bladed inline only with larger spinner blades (size 9-13) providing maximum vibration and lift. Very popular lure for northern pike.

Spinnerbaits

8

Versatility is what spinnerbaits are all about. With the open safety pin, weighted head and single hook design that runs vertical, it can be fished in and through vegetation (weedless) Slow rolled over cover, allowing it to sink, the blades will helicopter down to deeper water. Used for all gamefish.

Magnum Spinnerbaits

9

A beefed up version of the spinner bait for big pike and muskies. The magnum spinner bait comes in 1 oz and up to 6 oz’s using large blades for increased vibration and large body profiles for big fish.

Buzzbaits

Buzzbaits resemble either a standard spinnerbait or inline spinner with the exception of a rotating propeller blade replacing a flat blade. Buzzbaits are a topwater spinner and must be retrieved rapidly to produce a loud clacking sound as they move across the surface. Excellent lure for bass and pike.

Buzzbaits resemble either a standard spinnerbait or inline spinner with the exception of a rotating propeller blade replacing a flat blade. Buzzbaits are a topwater spinner and must be retrieved rapidly to produce a loud clacking sound as they move across the surface. Excellent lure for pike.

Live Bait Spinners

11By combining the vibration and flash of a spinner blade and the attraction of live bait, these produce an effective fish catching combination for most all species of game fish. The (top) is a weight forward spinner that is tipped with a night crawler, this spinner is cast and retrieved, primarily used on the Great Lakes for walleyes also known as the trade name erie dearie. The (middle) is a crawler harness with multiple hooks (2 or 3) and is also tipped with a night crawler, this spinner is rigged on bottom bouncers and sliding sinker rigs, for trolling of drifting. A single hook version is also used for minnows. The (bottom) is a strip on an old time fishing rig also called Prescott Spinner. Made from stiff wire with a rotating blade on front. The wire is slid through a minnow attaching a double hook on the end loop.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , ,

 
%d bloggers like this: