RSS

Category Archives: spinnerbaits

Spinner Baits For Pike

imagesCAYT6O8FSpinner baits are an effective presentation for covering expanses of water looking for pike. Whether you’re working weed beds, shallow sand flats, or rocky reefs, these lures are sure to put fish in the boat. Here are some of our top tips for targeting pike with spinner baits this season.

Choosing A Pike Spinner Bait

It’s no secret pike like the protection and ambushing advantages of weeds. A spinner bait, upward-facing, single hook keeps the bait fairly weedless, making it ideal to cast vegetation.  Use baits weighing up to 1.5-ounces for deep water, but mostly throw lures ranging from 1/2-ounce- to 1-ounce.

Willow-leaf-bladed baits give off plenty of flash, run deeper, and can be retrieved at a faster pace than Colorado-bladed baits. Yet, these latter blades are effective too for slower retrieves, or when you want plenty of thump in your presentation. Make sure you carry an Musky_FluorOrange_360assortment of both. When it comes to body materials, the bucktail is a bait that will have a longer lifespan and stand up to catching multiple fish. Some silicone skirts perform well, but rarely as good as tied hair. As for colors, popular colors are:  chartreuse and white, white and red, and orange and black are great producers, along with fire-tiger, and color combinations that present a perch or herring look.

Spinner Bait Line Tie Details

Use leaders when casting for pike and spinner baits with a closed coil bend in the wire form as opposed to the “V” common in many spinnerbaits. The coil secures the snap-lock of my leader in place, minimizing tangles. Leader snaps can move out of the V-bend wire forms, increasing the odds of fouling a bait on a cast. When not using leaders and targeting other species, V-bends are less of an issue as the line is tied direct to the bend and the taut knot holds the lure in place.


Three Prime Spots For Spinner Baits:

graph-weed-pikeINFS-110026-WEATH-05a

Weeds
Fan casting the weedbeds with spinner baits lets you quickly cover water and better your chances of contacting a fish. If you spot any structure in the weed flat, such as logs or rocks, cast beyond the target, then reel the bait into the area. Hold on, as this zone is a prime ambush area.  Concentrate on working the bait around edges in weeds, like a weed wall or cut into the bed.

Sand Flats
Beyond weed beds, shallow, sandy areas are good. These produce fish early in the season since they warm up quickly. As summer arrives, they can also be feeding zones. Look for signs of baitfish as you cast. Forage is a good indicator of whether or not the area will hold pike. In some instances, you can sight fish for pike, but remember to cast beyond the fish or you risk spooking them.

imagesCAYO9AKCRocks And Reefs
Rocky zones, such as points or shallow reefs, surrounded by deep water are other hot spots. Work baits around the edges and breaks. Don’t neglect the top of the reef. On water systems where pike are the dominant predator, reefs are some of my favorite zones to look for trophy-sized fish. These areas can be particularly good in cool, sunny conditions when pike may be sunning themselves on the rocks, which absorb heat. Rocks can also be good in high winds as the turmoil and turbidity caused by waves gives pike a predatory advantage to ambush disoriented prey.

Spinner Bait Gear
When casting spinner baits for pike, use a heavy-duty rods with a bit of flex in the tip, as it can easily cast baits. Too stiff a tip and you won’t get any distance out of casts. The baitcast reel spooled with 50- to 65-pound-test super line makes a great combination. A quality drag is a must for line-peeling runs common with large northern pike. At the business end of the setup,  We suggest to tie on a fluorocarbon leader in clear water and only use wire in murky conditions. Quality locking snaps and ball bearing swivels are a must for strength, and preventing line twist.

One final thing to keep in mind is although you may be reeling baits in on a straight retrieve, don’t make it consistent. Twitch the rod to impart erratic moves to the bait as these variances trigger hits. This is a good triggering move and has r

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET   NEWSLETTER

Enter your email address to follow this blog and receive notifications of new posts by email.

esulted in many pike meeting many landing net over the years.  This will without a doubt will work for you, too.

 

 

Tags: , , , , , ,

SPINNING FOR PIKE

??????????????

The #5 Mepps’ steady throb pulsed through the 30-pound Spiderwire, down the length of the medium/heavy-action graphite rod and directly into his hand. Just as the lure reached the edge of the cabbage weeds, the blade’s thrum came to an abrupt halt.   He set the hook hard into what felt like a concrete wall!   But then the wall began to move, and he knew he was into a trophy. Five minutes later and four desperate boatside runs, he lands the 20-pound northern pike.

IT’S SIMPLE:  Big pike LOVE spinners!

Weeds are the keys to spinning big pike crazy as these predators use vegetation to ambush any aquatic creature smaller than themselves.

The Baits
Spinner choices abound, but not all are created equal when it comes to enticing jumbo “scissorbills.” The angler should select certain sizes, shapes, and colors, over others.

szczupak-pospolity-80704Lesson No. 1 in choosing spinners for Esox lucius: bigger always is better. Pick magnum-sized offerings as even hammer-handles attack huge lures with abandon, and to catch true monsters, you MUST have that big profile.

Fat, deeply cupped blades throw out big vibrations that ring the dinner bell for monster pike. While sometimes thinner shaped blades (such as willow-leafs) that spin faster turn the trick; usually the slower-turning Colorado-type blades prove to be the ticket to a pike bonanza.

Because big flash stimulates lunkers, polished silver and gold blades work great. Another killer color combo, especially for use in darker, stained water, is orange blades with a black trailer.

In-Line vs. Offset Spinners
Spinners for northerns come in two basic designs, and both work effectively, but each has its strengths and weaknesses.

This slideshow requires JavaScript.

In-line spinners (such as Mepps, Worden’s Lures Rooster Tails, Panther Martin, and Blue Fox’s Vibrax), with their terminal trebles, have higher hook-up and catch rates than their safety-pin brethren, but they also hook vegetation and other underwater structure, too.

But lures such as Terminators and Stanley Jigs’ Rick Clunn 4-Blade Willow Spinnerbaits, with their single, upturned hooks surrounded by manmade skirts, slither through the weeds, logs and stumps. In-lines also cast like bullets, while offsets can catch the wind and lose momentum.

Line, Leaders
Any of the new “super-lines” such as like Berkley FireLine, Spiderwire Fusion, or Remington’s Power-Lokt, are superior to monofilament for spinning pike angling. Their low stretch and high-abrasion resistance benefit pike anglers.

Flout the convention and tie on a snap/swivel instead of a leader. Leaders inhibit action and deter wary trophies, while the snap swivels provide two major benefits: quick lure changes and eliminating/reducing line twist. True, you’ll lose lures to the razor-sharp choppers of aggressive mounters, but you’ll get lots more bites without leaders!

Speed & Delivery
Often northerns will attack even jet-powered offerings, but slowing down, pausing, or herky-jerkying that spinner, especially when it reaches the “Pike Zone,” reaps big rewards. Even lazy fish will smash a spinnerbait dangled in front on their out-sized mouth.

Always cast beyond where you think the pike lurk, because while “scissorbills” are legendary for their aggressiveness, they don’t like being bombed. Landing a bait on top of one’s head will likely result in spooking it.

Spin-Crazy Times & Spots
Primetime for driving pike spin crazy depends upon the season, time of day, and prevailing weather conditions. Early spring, right after ice out, brings spawned out northern pike shoreward (where they’re most vulnerable). Spinner rigs elicit savage strikes from hungry pike during spring.

Because northerns sight-feed, mid-day piking makes sense. Following that logic, clear, blue-sky days with lots of sun create perfect pike angling weather.

spinner-bait-diagramThe spinner’s flash and large profile, easily visible to cruising whoppers, prove irresistible.

Look for incoming streams or rivers, and concentrate your efforts just off the edges of weedy drop-offs. Weeds are the keys to spinning big pike crazy, as these predators use vegetation to ambush any aquatic creature smaller than themselves. Position the boat on the deep side of the drop-off, and cast the spinner up onto the flat itself, cranking just fast enough to keep the lure above the weeds, and pause when you get to the weed edge. Allow the bait to drift down and find the waiting lunkers, and hang on!

Using spinners to drive northern pike stir crazy is fun, easy, and productive.

Contact us for your next MONSTER PIKE Fishing Trip!

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , ,

Trolling Spinnerbaits For BIG PIKE

booyah_super_shad_spinnerbaitTrolling spinner baits is a technique every northern pike fisherman should have in their arsenal.

The idea is to quickly fish pike spots, such as weed flats and break lines, searching for actively feeding fish or enticing neutral ones to bite.

Spinner baits are effective trolling baits for several reasons. They can be trolled quickly and the upward facing single hook keeps baits fairly weedless, allowing trolling through thick vegetation with minimal foul-up. Also, their bucktail bodies equates to a high-hooking percentage.

To properly troll spinnerbaits, match the bait’s weight to the trolling speed.

When using a short arm, 1.5-ounce to 2-ounce trolling spinnerbait, run it between 75 feet to 120 feet behind the boat.   Run them this far back because it’s out of the prop wash area. You will want the bait to pop out of the water every five to 10 seconds.

Lure Pops Out Of Water

The popping attracts pike and in order for the sound to be effective, the baits must be out of the prop wash’s disturbance. Trolling long lines also allows you to position baits over structure too shallow to drive over because of the lag time between the boat and the bait.

When speed trolling, run the baits just below the surface, but not popping out.   At this speed popping baits lose their effectiveness. Use 2-ounce to 3-ounce baits, 75 feet behind the boat, trolling them between 4.5 mph and 5.5 mph. If you want to troll faster, use 4-ounce to 6-ounce baits.

When speed trolling, regularly position baits close to the prop wash.  Baits run beautifully on the side of the prop wash, they dance because of the different currents in the water, darting back and forth, giving you a real irregular troll out of them.

A fundamental to trolling is “S”-turns. Baits positioned on the outside of the turn will be pulled faster through the water, while the bait on the inside of the turn will slow down. When a fish hits on a turn, note which side of the turn the bait was on. This is a good indication of how fast you should troll. Slow down if on the inside and speed up if on the outside of the turn.

This slideshow requires JavaScript.

Turns Are Key

Turning is also helpful when working weed edges or breaklines. Meandering along a breakline or weed edge allows you to fish different depths as well as structure and cover on a trolling run, increasing your chances of finding fish.

Spinnerbaits can also be effective over rocky structure. After passing a point, it is advisable to cut the motor and drop the bait down a bit, count to five and then engage the throttle again.   This causes the bait to sink then swim back up to the surface. A lot of time it’s on the uplift when a fish will hit. A BIG pike that sees a bait suddenly shoot to the surface might think it’s a baitfish trying to escape and these big predators will react, hitting it to prevent it from getting away.

To troll spinnerbaits for pike make sure you have the right gear. Rod holders reduce arm strain and must be strong enough to sustain a pike’s strike. With holders you can position rods, and subsequently, the path of the baits.

Longer rods between 7 feet and 8 feet, in medium- to heavy-action are good for trolling. Reels with high gear ratios are crucial to quickly play pike, minimizing stress to the fish. Line counter reels are also helpful. Spool reels with 80- to 100-pound-test superbraid, and use a strong wire leader.

Keep Drag Loose

Keep drags loose, especially when using superbraid lines, otherwise you’ll pull baits away from fish or your gear may fail under the force of a hit. When you get a hit, quickly grab the rod out of the holder. Do not to set the hook too hard. Trolling at these high speeds will often be enough to set the hook. After the hook set, cut the engine to fight the fish.

Trolling spinnerbaits allows you to cover vast stretches of water, increasing your odds of finding a feeding fish throughout the day.

Take advantage of trolling to explore new areas you haven’t fished before or to work productive water. Don’t be afraid to troll fast for pike, these freshwater brutes are torpedo’s and notorious for slamming speeding spinnerbaits.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , ,

Spinner Baits For Pike

imagesCAYT6O8FSpinner baits are an effective presentation for covering expanses of water looking for pike. Whether you’re working weed beds, shallow sand flats, or rocky reefs, these lures are sure to put fish in the boat. Here are some of our top tips for targeting pike with spinner baits this season.

Choosing A Pike Spinner Bait

It’s no secret pike like the protection and ambushing advantages of weeds. A spinner bait, upward-facing, single hook keeps the bait fairly weedless, making it ideal to cast vegetation.  Use baits weighing up to 1.5-ounces for deep water, but mostly throw lures ranging from 1/2-ounce- to 1-ounce.

Willow-leaf-bladed baits give off plenty of flash, run deeper, and can be retrieved at a faster pace than Colorado-bladed baits. Yet, these latter blades are effective too for slower retrieves, or when you want plenty of thump in your presentation. Make sure you carry an Musky_FluorOrange_360assortment of both. When it comes to body materials, the bucktail is a bait that will have a longer lifespan and stand up to catching multiple fish. Some silicone skirts perform well, but rarely as good as tied hair. As for colors, popular colors are:  chartreuse and white, white and red, and orange and black are great producers, along with fire-tiger, and color combinations that present a perch or herring look.

Spinner Bait Line Tie Details

Use leaders when casting for pike and spinner baits with a closed coil bend in the wire form as opposed to the “V” common in many spinnerbaits. The coil secures the snap-lock of my leader in place, minimizing tangles. Leader snaps can move out of the V-bend wire forms, increasing the odds of fouling a bait on a cast. When not using leaders and targeting other species, V-bends are less of an issue as the line is tied direct to the bend and the taut knot holds the lure in place.


Three Prime Spots For Spinner Baits:

graph-weed-pikeINFS-110026-WEATH-05a

Weeds
Fan casting the weedbeds with spinner baits lets you quickly cover water and better your chances of contacting a fish. If you spot any structure in the weed flat, such as logs or rocks, cast beyond the target, then reel the bait into the area. Hold on, as this zone is a prime ambush area.  Concentrate on working the bait around edges in weeds, like a weed wall or cut into the bed.

Sand Flats
Beyond weed beds, shallow, sandy areas are good. These produce fish early in the season since they warm up quickly. As summer arrives, they can also be feeding zones. Look for signs of baitfish as you cast. Forage is a good indicator of whether or not the area will hold pike. In some instances, you can sight fish for pike, but remember to cast beyond the fish or you risk spooking them.

imagesCAYO9AKCRocks And Reefs
Rocky zones, such as points or shallow reefs, surrounded by deep water are other hot spots. Work baits around the edges and breaks. Don’t neglect the top of the reef. On water systems where pike are the dominant predator, reefs are some of my favorite zones to look for trophy-sized fish. These areas can be particularly good in cool, sunny conditions when pike may be sunning themselves on the rocks, which absorb heat. Rocks can also be good in high winds as the turmoil and turbidity caused by waves gives pike a predatory advantage to ambush disoriented prey.

Spinner Bait Gear
When casting spinner baits for pike, use a heavy-duty rods with a bit of flex in the tip, as it can easily cast baits. Too stiff a tip and you won’t get any distance out of casts. The baitcast reel spooled with 50- to 65-pound-test super line makes a great combination. A quality drag is a must for line-peeling runs common with large northern pike. At the business end of the setup,  We suggest to tie on a fluorocarbon leader in clear water and only use wire in murky conditions. Quality locking snaps and ball bearing swivels are a must for strength, and preventing line twist.

One final thing to keep in mind is although you may be reeling baits in on a straight retrieve, don’t make it consistent. Twitch the rod to impart erratic moves to the bait as these variances trigger hits. This is a good triggering move and has r

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET   NEWSLETTER

Enter your email address to follow this blog and receive notifications of new posts by email.

esulted in many pike meeting many landing net over the years.  This will without a doubt will work for you, too.

 

 

Tags: , , , , , ,

PIKE FISHING TACKLE BOX – A MUST TO HAVE

193Page1_SimonCheung_tackleFrom spoons to spinners to swimbaits, everything you’ll ever need to tackle mammoth northerns

No aspect of fishing has changed more over the past two decades than our understanding of pike. Indeed, if we had written about equipping ourselves for big northerns just 20 years ago, our ultimate tacklebox would have been small, the offerings skimpy and the techniques few. But as our knowledge of pike behaviour has expanded, so too has the range of tackle needed to catch these toothy critters—as the following roundup of the top lures and tactics reveals.

CRANKBAITS

When to fish ‘em
From midsummer until freeze-up, hard and soft crankbaits excel in open water, on deep flats and around main-lake rocky structures. The lipless versions are superb around reed- and weedlines.

tip3

Where and how
You can both troll and cast these lures, but don’t do either aimlessly. Concentrate on key transitions, edges, drop-offs, breaklines and specific bottom contours. The CS25 Suspending Super Spot and Lucky Craft LVR models are awesome vibrating, lipless casting lures. When you pause them for even a millisecond, a following pike only has the option of opening its mouth and eating it. These lures may look a tad small, but they fish big because you can retrieve them quickly and they won’t roll over.

SUGGESTIONS:

  • Rapala Super Shad Rap,
  • Lucky Craft LVR D-15,
  • Cotton Cordell CS25 Suspending Super Spot,
  • Storm Kickin’ Minnow (9-inch).

MINNOWBAITS/JERKBAITS

When to fish ‘em
Cast hard jerkbaits (Husky Jerk, X-Rap, Long A, Original Floater, Slender Pointer) when the water is cold, typically early in the spring and late fall in southern Canada, and all year long farther north. Or speed troll these lures in the summer when the pike have retreated to cooler, deeper water. Soft jerkbaits rigged Texas-style, meanwhile, are deadly when vegetation is moderately sparse with plenty of open pockets. My favourite time to fish soft jerks, though, is in the late fall wherever I find thinning cabbage weeds in deep water adjacent to main-lake rock structures.
MG_10002

Where and how
Hard jerkbaits are at their best in and around rock structure. In cold water, retrieve the lure as close to structure or cover as possible. Wind the bait down, jerk it three or four times and pause. The colder the water, the longer you should wait. Nick the tops of weeds, scrape rocks and tick logs and stumps. Pike usually strike when the lure suspends, rises slowly or starts the next series of jerks. You can also throw a hard jerk when there’s a few feet of water over the tops of deep weeds. When the northerns go deep in midsummer, troll hard jerkbaits around rocky main-lake points and over the tops of mid-lake humps. Contour trolling a big F18 Original Floater behind a three-way rig is a deadly hot-weather pattern.

Rig soft plastics (Houdini Shad, Berkley Saltwater Jerk Shad, YUM Dinger) weedless on a stout 5/0 to 7/0 offset hook without any additional weight and let them flutter toward bottom. Then hop, pop, twitch and pause the lure continually to imitate a dying baitfish. Along weed edges, swim the lure through the grass, deflecting it off any stalks you feel. When you’re fishing the corridor between deep weeds and the surface, let the lure fall to tick the top of the weeds, then pop it back to the surface.

SUGGESTIONS:

  • F18 Rapala Original Floater, Rapala X-Rap 14, #14 Rapala Husky Jerk,
  • Lucky Craft Pointer 128,
  • Lucky Craft Slender Pointer 127,
  • YUM Houdini Shad (9-inch),
  • Berkley Saltwater Jerk Shad (5-inch),
  • YUM Dinger (7-inch),
  • Bomber Magnum Long A.

TOPWATERS

When to fish ‘em
Be careful if you have a bad heart. There’s nothing more exciting than  watching a huge pike crush a topwater lure. During the summer months,  the best times are early in the morning, late in the afternoon and when  it’s overcast.

OLYMPUS DIGITAL CAMERA

Where and how
Deep weed edges, woody  shorelines and rocky main-lake structures are perfect locations for  topwaters. Instead of throwing a big, noisy buzzbait over a weedbed,  position your boat parallel to the weed edge so you can keep your lure  running over the prime pike zone. Do the same thing when you’re fishing  among fallen trees and logs. Remember, pike are ambush predators that  hide along the fringes of cover rather than burying themselves deep  inside it.

The biggest and loudest buzzbaits (in white, chartreuse, yellow and  orange) will attract the most attention. When the fish are aggressive,  add a stinger hook and a five-inch-long soft-plastic worm or grub, or a  pork chunk to seal the deal. But here’s the key: don’t react to the  explosion when a pike strikes. Keep your rod tip pointed up during the  retrieve and keep reeling rather than dropping the tip to set the hook.  When the fish are in a funk, however, scurry a Bull Ribbit or Hawg Frawg  in the same locations. The lighter bait forces you to slow down your  retrieve, but the frog will still kick up its heels. Only pause the frog  when you swim it over an opening in the weeds.

Many pike anglers  miss the best big-fish locations: isolated rock piles, underwater  points and shallow boulder-strewn shoals. They also think they can only  use topwater lures when conditions are calm. Actually, a slight chop is  better than a slick surface for walking a big Zara Spook, Skitter Walk  or Live Sammy. And a fast retrieve produces explosive strikes. When the  fish are less belligerent, or when the water is dirty, dingy or stained,  a prop bait such as the Boy Howdy, Splash-Tail or Skitter Prop  sputtering on the surface will cause a pike to become unglued. Prop  baits are also deadly when pike are resting beside isolated forms of  cover, such as a giant deadhead poking out of the water.

SUGGESTIONS:

  • Cotton Cordell Boy Howdy,
  • Rapala Skitter Prop,
  • Lucky Craft  Splash-Tail,
  • Mister Twister Top Prop,
  • Stanley Bull Ribbit,
  • Heddon Zara Spook,
  • Rapala Skitter Walk,
  • Lucky Craft Live Sammy,
  • Mister Twister Hawg Frawg,
  • Booyah Buzz.

SPINNERBAITS

When to fish ‘em
Spinnerbaits produce well from late spring until mid-autumn, when the  pike have set up along reed- and weedlines, and shorelines littered with  fallen trees and submerged wood.

images-3imagesCA86RT7UWhere and how
A  slightly larger than normal (3/4- to one-ounce) bass-style, willowleaf  spinnerbait tipped with a soft-plastic grub or worm is a marvellous tool  when retrieved quickly just under the surface. Don’t hop, pop or  manipulate it in any way; just keep it moving.

When the biggest  toothies turn off and won’t come to the surface, dredge them up with a  heavy 1 1/2- to 2 1/2-ounce Dick Pearson Grinder. Let it flutter down,  then slowly crank it back to the boat, keeping it within a foot of  bottom at all times. It works best in thick grass, but it can also be  awesome on main-lake rocky structures.

SUGGESTIONS:

  • Booyah Blade Spinnerbait,
  • Terminator Titanium Spinnerbait,
  • Stanley Spinner,
  • Dick Pearson Grinder

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , , ,

Spinner Baits For Pike

imagesCAYT6O8FSpinner baits are an effective presentation for covering expanses of water looking for pike. Whether you’re working weed beds, shallow sand flats, or rocky reefs, these lures are sure to put fish in the boat. Here are some of our top tips for targeting pike with spinner baits this season.

Choosing A Pike Spinner Bait

It’s no secret pike like the protection and ambushing advantages of weeds. A spinner bait, upward-facing, single hook keeps the bait fairly weedless, making it ideal to cast vegetation.  Use baits weighing up to 1.5-ounces for deep water, but mostly throw lures ranging from 1/2-ounce- to 1-ounce.

Willow-leaf-bladed baits give off plenty of flash, run deeper, and can be retrieved at a faster pace than Colorado-bladed baits. Yet, these latter blades are effective too for slower retrieves, or when you want plenty of thump in your presentation. Make sure you carry an Musky_FluorOrange_360assortment of both. When it comes to body materials, the bucktail is a bait that will have a longer lifespan and stand up to catching multiple fish. Some silicone skirts perform well, but rarely as good as tied hair. As for colors, popular colors are:  chartreuse and white, white and red, and orange and black are great producers, along with fire-tiger, and color combinations that present a perch or herring look.

Spinner Bait Line Tie Details

Use leaders when casting for pike and spinner baits with a closed coil bend in the wire form as opposed to the “V” common in many spinnerbaits. The coil secures the snap-lock of my leader in place, minimizing tangles. Leader snaps can move out of the V-bend wire forms, increasing the odds of fouling a bait on a cast. When not using leaders and targeting other species, V-bends are less of an issue as the line is tied direct to the bend and the taut knot holds the lure in place.

25


Three Prime Spots For Spinner Baits:

graph-weed-pikeINFS-110026-WEATH-05a

Weeds
Fan casting the weedbeds with spinner baits lets you quickly cover water and better your chances of contacting a fish. If you spot any structure in the weed flat, such as logs or rocks, cast beyond the target, then reel the bait into the area. Hold on, as this zone is a prime ambush area.  Concentrate on working the bait around edges in weeds, like a weed wall or cut into the bed.

Sand Flats
Beyond weed beds, shallow, sandy areas are good. These produce fish early in the season since they warm up quickly. As summer arrives, they can also be feeding zones. Look for signs of baitfish as you cast. Forage is a good indicator of whether or not the area will hold pike. In some instances, you can sight fish for pike, but remember to cast beyond the fish or you risk spooking them.

imagesCAYO9AKCRocks And Reefs
Rocky zones, such as points or shallow reefs, surrounded by deep water are other hot spots. Work baits around the edges and breaks. Don’t neglect the top of the reef. On water systems where pike are the dominant predator, reefs are some of my favorite zones to look for trophy-sized fish. These areas can be particularly good in cool, sunny conditions when pike may be sunning themselves on the rocks, which absorb heat. Rocks can also be good in high winds as the turmoil and turbidity caused by waves gives pike a predatory advantage to ambush disoriented prey.

Spinner Bait Gear
When casting spinner baits for pike, use a heavy-duty rods with a bit of flex in the tip, as it can easily cast baits. Too stiff a tip and you won’t get any distance out of casts. The baitcast reel spooled with 50- to 65-pound-test super line makes a great combination. A quality drag is a must for line-peeling runs common with large northern pike. At the business end of the setup,  We suggest to tie on a fluorocarbon leader in clear water and only use wire in murky conditions. Quality locking snaps and ball bearing swivels are a must for strength, and preventing line twist.

One final thing to keep in mind is although you may be reeling baits in on a straight retrieve, don’t make it consistent. Twitch the rod to impart erratic moves to the bait as these variances trigger hits. This is a good triggering move and has resulted in many pike meeting many landing net over the years.  This will without a doubt will work for you, too.

 

Tags: , , , , , ,

SPINNING FOR PIKE

??????????????

The #5 Mepps’ steady throb pulsed through the 30-pound Spiderwire, down the length of the medium/heavy-action graphite rod and directly into his hand. Just as the lure reached the edge of the cabbage weeds, the blade’s thrum came to an abrupt halt.   He set the hook hard into what felt like a concrete wall!   But then the wall began to move, and he knew he was into a trophy. Five minutes later and four desperate boatside runs, he lands the 20-pound northern pike.

IT’S SIMPLE:  Big pike LOVE spinners!

Weeds are the keys to spinning big pike crazy as these predators use vegetation to ambush any aquatic creature smaller than themselves.

The Baits
Spinner choices abound, but not all are created equal when it comes to enticing jumbo “scissorbills.” The angler should select certain sizes, shapes, and colors, over others.

szczupak-pospolity-80704Lesson No. 1 in choosing spinners for Esox lucius: bigger always is better. Pick magnum-sized offerings as even hammer-handles attack huge lures with abandon, and to catch true monsters, you MUST have that big profile.

Fat, deeply cupped blades throw out big vibrations that ring the dinner bell for monster pike. While sometimes thinner shaped blades (such as willow-leafs) that spin faster turn the trick; usually the slower-turning Colorado-type blades prove to be the ticket to a pike bonanza.

Because big flash stimulates lunkers, polished silver and gold blades work great. Another killer color combo, especially for use in darker, stained water, is orange blades with a black trailer.

In-Line vs. Offset Spinners
Spinners for northerns come in two basic designs, and both work effectively, but each has its strengths and weaknesses.

This slideshow requires JavaScript.

In-line spinners (such as Mepps, Worden’s Lures Rooster Tails, Panther Martin, and Blue Fox’s Vibrax), with their terminal trebles, have higher hook-up and catch rates than their safety-pin brethren, but they also hook vegetation and other underwater structure, too.

But lures such as Terminators and Stanley Jigs’ Rick Clunn 4-Blade Willow Spinnerbaits, with their single, upturned hooks surrounded by manmade skirts, slither through the weeds, logs and stumps. In-lines also cast like bullets, while offsets can catch the wind and lose momentum.

Line, Leaders
Any of the new “super-lines” such as like Berkley FireLine, Spiderwire Fusion, or Remington’s Power-Lokt, are superior to monofilament for spinning pike angling. Their low stretch and high-abrasion resistance benefit pike anglers.

Flout the convention and tie on a snap/swivel instead of a leader. Leaders inhibit action and deter wary trophies, while the snap swivels provide two major benefits: quick lure changes and eliminating/reducing line twist. True, you’ll lose lures to the razor-sharp choppers of aggressive mounters, but you’ll get lots more bites without leaders!

Speed & Delivery
Often northerns will attack even jet-powered offerings, but slowing down, pausing, or herky-jerkying that spinner, especially when it reaches the “Pike Zone,” reaps big rewards. Even lazy fish will smash a spinnerbait dangled in front on their out-sized mouth.

Always cast beyond where you think the pike lurk, because while “scissorbills” are legendary for their aggressiveness, they don’t like being bombed. Landing a bait on top of one’s head will likely result in spooking it.

Spin-Crazy Times & Spots
Primetime for driving pike spin crazy depends upon the season, time of day, and prevailing weather conditions. Early spring, right after ice out, brings spawned out northern pike shoreward (where they’re most vulnerable). Spinner rigs elicit savage strikes from hungry pike during spring.

Because northerns sight-feed, mid-day piking makes sense. Following that logic, clear, blue-sky days with lots of sun create perfect pike angling weather.

spinner-bait-diagramThe spinner’s flash and large profile, easily visible to cruising whoppers, prove irresistible.

Look for incoming streams or rivers, and concentrate your efforts just off the edges of weedy drop-offs. Weeds are the keys to spinning big pike crazy, as these predators use vegetation to ambush any aquatic creature smaller than themselves. Position the boat on the deep side of the drop-off, and cast the spinner up onto the flat itself, cranking just fast enough to keep the lure above the weeds, and pause when you get to the weed edge. Allow the bait to drift down and find the waiting lunkers, and hang on!

Using spinners to drive northern pike stir crazy is fun, easy, and productive.

Contact us for your next MONSTER PIKE Fishing Trip!

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , ,

 
%d bloggers like this: