RSS

Tag Archives: fishing tips

Floats & Bobbers with VIDEO

1271444396vo19WMBobbers, corks, floats… depending upon where you come from, fishermen have different names for the buoyant device that suspends a bait below the surface. But no matter where you go in North America or what you call it, the revered bobber rig is one of the most popular presentations in fishing. And deadly too!

There’s a magic and significance to bobber fishing. The sight of that float twitching, popping, or shooting down like a missile in reverse is one of the most exciting experiences in fishing – no matter what you’re fishing for. Best of all, bobber fishing is one of the easiest approaches to the sport. However, there are some tips and tricks to bobber fishing that can help you put more fish in the boat.

Slip Bobbers
Most anglers in America use fixed floats almost all the time. But there are certain applications where slip bobbers are critical. In case you’re not familiar with what a slip bobber is, let me explain. With a slip rig, the bobber has a hollow ferrule through its center that allows the line to slide through it effortlessly. A “bobber stop” is affixed to the line above the float (along with a stopper bead). You can set the stop anywhere on the line that you want, so you can effectively cast and fish at any depth. It’s important to use monofilament line with this set-up, instead of braid. Braided “super lines” are very slippery and don’t allow the bobber stop to “bite” very well.

traditional-bobber-rig1Let’s say you have walleyes or whatever species located on a deep-water hump that’s 26 feet deep. Set your bobber stop to 25 feet and presto, your bait hangs a foot off the bottom right in front of the fish’s nose. The typical bait used in a slip bobber presentation is a jig or plain hook tipped with live bait (minnows, leeches, crawlers, etc.).

When you make a cast, your bait will fall vertically to the location of the float. Since many species, like walleye, like to hit a bait on-the-drop, pay attention to your line as the bait sinks. If your float is set at 25 feet, and the line suddenly stops coming off your spool at 10 feet, then something has intercepted it on the way down. Reel up the slack and set the hook when this happens.

Another great slip bobber presentation, because of the way the bait drops vertically, is to use the rig for fishing pockets in heavy cover. Spot a little clearing in some cabbage, pads, reeds or whatever and pitch the cast on the spot. Your bait will fall straight down and hopefully there will be a game fish waiting there at that ambush point.


We’ve all used those classic, round, red & white clip-on bobbers, right? They float, so they do the job. But there are other bobbers in the store that can do a whole lot more for you. One such float style is what we call the “pencil bobber”. This is a favorite style for situations where a fixed bobber works best, which is typically af_1_2_pencil_5_1_2_springwhen fishing for smaller fish. Why? Because smaller fish like perch will bite one of two ways: sometimes they’ll pull the bobber down, and sometimes they’ll take a bait and rise with it.  Set the amount of weight under the long, skinny pencil bobber so it’s just enough to make the bobber float at a 45-degree angle. If a fish hits downward, the bobber tips up. If he hits it rising, the bobber lays flat on the water. Either way, you will see the bite and end up catching more fish! Give it a try.

Fixed bobbers, in my opinion, are also better than slip bobbers when fishing for spawning fish on the beds. Instead of the bait falling straight down, it falls with a pendulum motion on a fixed bobber. From my experience, this triggers strikes from

BobberManprotective spawning fish much better than a vertical drop.

You’re never too young or old to have a blast catching fish with floats. But remember, despite the simplicity of bobber fishing, there are always a few ways to maximize the effectiveness of any presentation. Go get yourself an assortment of bobber styles, shapes and sizes and experiment with them this summer. You’ll be glad you did.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , ,

How to Build a Worm Farm

A worm farm is used as a means of naturally creating fertilization for planting and gardening. Worms are good at breaking down waste matter quickly into rich organic compost.

342x316xWorm-Farm_gif_pagespeed_ic_fLRfWeXSZ1
The components for making one are very much basic and can be more likely be found lying around somewhere in your home so making a worm farm is very simple.

Tools required

  • Gloves
  • Boots
  • Shovel

Materials required

  • Worms
  • Waste (Trash such as kitchen waste, vegetable scraps etc.)
  • Container (such as a bin or otherwise)
  • Top soil
  • Water

Instructions

  1. Most persons prefer to buy the worms however other persons source them elsewhere. Wherever you find it most fit to source your worms is up to you. A pound of worms usually equates to 1,000 worms.
  2. Prepare all your garbage and waste matters and dig a hole with your shovel to put the container in allowing the opening to stay at the top. Make sure the container has some holes as drainage.
  3. When everything is lined up and ready place all the dirt and waste into your worm farm container and use water to saturate the contents then put in all the worms. Close the lid tightly to keep other things out of it.
  4. Wait a couple weeks for the waste to decompose then check the bin for the changes in the compost.
  5. Now you can use the compost from the worm farm as you like for planting and gardening.

Tips and Warning

  • Red worms are most commonly used for worm farms because they consume a lot and optimize the waste matter so they are normally seen as a good investment. Another good option of worms are tiger worms.
  • An old fridge or freezer (that can be closed) can be used as your container for your worm farm; however the main components such as the coils and compressor should be removed before using it. These parts contain chemicals that can escape and poison the earth.
  • The contents of a worm farm can also be used as fish bait when fishing.
  • Do not allow the dirt in the worm farm to get too dry, this will cause the worms to move downwards and slow down the decomposition process.
  • Worm farms help persons to save money, instead of purchasing fertilizers which can be expensive and non-organic that may be harmful to the environment they can make and use cheap organic waste.
  • Because you will be handling all types of dirt and waste matter, it is advised that once you are building a worm farm you always have on the right clothing such as gloves and right shoes this protects you from bacteria and infection.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 
 

Tags: , , , , , ,

Sun Low – Think Top, Sun High – Think Bottom

Easing from spring into summer, presentations takes on a timing pattern throughout the day based on the phrase…One thing to keep in mind… Depth control matters relative to the time of the day…

depth control matters

Starting at the predawn launch until around 8 AM, the two rigs garnering the most action are the top water and buzz bait rods since the Sun is still low on the horizon and fish are more active closer to the surface.

As the day ages the top water bite often slows and there’s a switch to mid-depth presentations. Accordingly the rods rigged with a spinner bait, crank bait, swim jig or slow sinking stick bait start to see more use…

100_0368

Once the noon hour approaches and  high in the sky make another transition to rods rigged with weighted plastics, jigs and deeper crank baits since fish tend to adjust to deeper cover during this hours.

If the trip is a day-long on the lake, the lure selection trend typically reverses as the sun slides downward towards the western horizon…In other words, around 4 PM the mid-depth selection comes back into play and the focus returns to the top water baits after 6 PM.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , ,

Floats & Bobbers with VIDEO

1271444396vo19WMBobbers, corks, floats… depending upon where you come from, fishermen have different names for the buoyant device that suspends a bait below the surface. But no matter where you go in North America or what you call it, the revered bobber rig is one of the most popular presentations in fishing. And deadly too!

There’s a magic and significance to bobber fishing. The sight of that float twitching, popping, or shooting down like a missile in reverse is one of the most exciting experiences in fishing – no matter what you’re fishing for. Best of all, bobber fishing is one of the easiest approaches to the sport. However, there are some tips and tricks to bobber fishing that can help you put more fish in the boat.

Slip Bobbers
Most anglers in America use fixed floats almost all the time. But there are certain applications where slip bobbers are critical. In case you’re not familiar with what a slip bobber is, let me explain. With a slip rig, the bobber has a hollow ferrule through its center that allows the line to slide through it effortlessly. A “bobber stop” is affixed to the line above the float (along with a stopper bead). You can set the stop anywhere on the line that you want, so you can effectively cast and fish at any depth. It’s important to use monofilament line with this set-up, instead of braid. Braided “super lines” are very slippery and don’t allow the bobber stop to “bite” very well.

traditional-bobber-rig1Let’s say you have walleyes or whatever species located on a deep-water hump that’s 26 feet deep. Set your bobber stop to 25 feet and presto, your bait hangs a foot off the bottom right in front of the fish’s nose. The typical bait used in a slip bobber presentation is a jig or plain hook tipped with live bait (minnows, leeches, crawlers, etc.).

When you make a cast, your bait will fall vertically to the location of the float. Since many species, like walleye, like to hit a bait on-the-drop, pay attention to your line as the bait sinks. If your float is set at 25 feet, and the line suddenly stops coming off your spool at 10 feet, then something has intercepted it on the way down. Reel up the slack and set the hook when this happens.

Another great slip bobber presentation, because of the way the bait drops vertically, is to use the rig for fishing pockets in heavy cover. Spot a little clearing in some cabbage, pads, reeds or whatever and pitch the cast on the spot. Your bait will fall straight down and hopefully there will be a game fish waiting there at that ambush point.


We’ve all used those classic, round, red & white clip-on bobbers, right? They float, so they do the job. But there are other bobbers in the store that can do a whole lot more for you. One such float style is what we call the “pencil bobber”. This is a favorite style for situations where a fixed bobber works best, which is typically af_1_2_pencil_5_1_2_springwhen fishing for smaller fish. Why? Because smaller fish like perch will bite one of two ways: sometimes they’ll pull the bobber down, and sometimes they’ll take a bait and rise with it.  Set the amount of weight under the long, skinny pencil bobber so it’s just enough to make the bobber float at a 45-degree angle. If a fish hits downward, the bobber tips up. If he hits it rising, the bobber lays flat on the water. Either way, you will see the bite and end up catching more fish! Give it a try.

Fixed bobbers, in my opinion, are also better than slip bobbers when fishing for spawning fish on the beds. Instead of the bait falling straight down, it falls with a pendulum motion on a fixed bobber. From my experience, this triggers strikes from protective spawning fish much better than a vertical drop.  BobberMan

You’re never too young or old to have a blast catching fish with floats. But remember, despite the simplicity of bobber fishing, there are always a few ways to maximize the effectiveness of any presentation. Go get yourself an assortment of bobber styles, shapes and sizes and experiment with them this summer. You’ll be glad you did.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , ,

How to Build a Worm Farm

A worm farm is used as a means of naturally creating fertilization for planting and gardening. Worms are good at breaking down waste matter quickly into rich organic compost.

342x316xWorm-Farm_gif_pagespeed_ic_fLRfWeXSZ1
The components for making one are very much basic and can be more likely be found lying around somewhere in your home so making a worm farm is very simple.

Tools required

  • Gloves
  • Boots
  • Shovel

Materials required

  • Worms
  • Waste (Trash such as kitchen waste, vegetable scraps etc.)
  • Container (such as a bin or otherwise)
  • Top soil
  • Water

Instructions

  1. Most persons prefer to buy the worms however other persons source them elsewhere. Wherever you find it most fit to source your worms is up to you. A pound of worms usually equates to 1,000 worms.
  2. Prepare all your garbage and waste matters and dig a hole with your shovel to put the container in allowing the opening to stay at the top. Make sure the container has some holes as drainage.
  3. When everything is lined up and ready place all the dirt and waste into your worm farm container and use water to saturate the contents then put in all the worms. Close the lid tightly to keep other things out of it.
  4. Wait a couple weeks for the waste to decompose then check the bin for the changes in the compost.
  5. Now you can use the compost from the worm farm as you like for planting and gardening.

Tips and Warning

  • Red worms are most commonly used for worm farms because they consume a lot and optimize the waste matter so they are normally seen as a good investment. Another good option of worms are tiger worms.
  • An old fridge or freezer (that can be closed) can be used as your container for your worm farm; however the main components such as the coils and compressor should be removed before using it. These parts contain chemicals that can escape and poison the earth.
  • The contents of a worm farm can also be used as fish bait when fishing.
  • Do not allow the dirt in the worm farm to get too dry, this will cause the worms to move downwards and slow down the decomposition process.
  • Worm farms help persons to save money, instead of purchasing fertilizers which can be expensive and non-organic that may be harmful to the environment they can make and use cheap organic waste.
  • Because you will be handling all types of dirt and waste matter, it is advised that once you are building a worm farm you always have on the right clothing such as gloves and right shoes this protects you from bacteria and infection.

Follow our HUNTING BLOG

WEBSITE    RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 
 

Tags: , , , , , ,

Sun Low – Think Top, Sun High – Think Bottom

Easing from spring into summer, presentations takes on a timing pattern throughout the day based on the phrase…One thing to keep in mind… Depth control matters relative to the time of the day…

depth control matters

Starting at the predawn launch until around 8 AM, the two rigs garnering the most action are the top water and buzz bait rods since the Sun is still low on the horizon and fish are more active closer to the surface.

As the day ages the top water bite often slows and there’s a switch to mid-depth presentations. Accordingly the rods rigged with a spinner bait, crank bait, swim jig or slow sinking stick bait start to see more use…

100_0368

Once the noon hour approaches and  high in the sky make another transition to rods rigged with weighted plastics, jigs and deeper crank baits since fish tend to adjust to deeper cover during this hours.

If the trip is a day-long on the lake, the lure selection trend typically reverses as the sun slides downward towards the western horizon…In other words, around 4 PM the mid-depth selection comes back into play and the focus returns to the top water baits after 6 PM.

Follow our HUNTING BLOG

WEBSITE    RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , ,

Floats & Bobbers with VIDEO

1271444396vo19WMBobbers, corks, floats… depending upon where you come from, fishermen have different names for the buoyant device that suspends a bait below the surface. But no matter where you go in North America or what you call it, the revered bobber rig is one of the most popular presentations in fishing. And deadly too!

There’s a magic and significance to bobber fishing. The sight of that float twitching, popping, or shooting down like a missile in reverse is one of the most exciting experiences in fishing – no matter what you’re fishing for. Best of all, bobber fishing is one of the easiest approaches to the sport. However, there are some tips and tricks to bobber fishing that can help you put more fish in the boat.

Slip Bobbers
Most anglers in America use fixed floats almost all the time. But there are certain applications where slip bobbers are critical. In case you’re not familiar with what a slip bobber is, let me explain. With a slip rig, the bobber has a hollow ferrule through its center that allows the line to slide through it effortlessly. A “bobber stop” is affixed to the line above the float (along with a stopper bead). You can set the stop anywhere on the line that you want, so you can effectively cast and fish at any depth. It’s important to use monofilament line with this set-up, instead of braid. Braided “super lines” are very slippery and don’t allow the bobber stop to “bite” very well.traditional-bobber-rig1

Let’s say you have walleyes or whatever species located on a deep-water hump that’s 26 feet deep. Set your bobber stop to 25 feet and presto, your bait hangs a foot off the bottom right in front of the fish’s nose. The typical bait used in a slip bobber presentation is a jig or plain hook tipped with live bait (minnows, leeches, crawlers, etc.).

When you make a cast, your bait will fall vertically to the location of the float. Since many species, like walleye, like to hit a bait on-the-drop, pay attention to your line as the bait sinks. If your float is set at 25 feet, and the line suddenly stops coming off your spool at 10 feet, then something has intercepted it on the way down. Reel up the slack and set the hook when this happens.

Another great slip bobber presentation, because of the way the bait drops vertically, is to use the rig for fishing pockets in heavy cover. Spot a little clearing in some cabbage, pads, reeds or whatever and pitch the cast on the spot. Your bait will fall straight down and hopefully there will be a game fish waiting there at that ambush point.


We’ve all used those classic, round, red & white clip-on bobbers, right? They float, so they do the job. But there are other bobbers in the store that can do a whole lot more for you. One such float style is what we call the “pencil bobber”. This is a favorite style for situations where a fixed bobber works best, which is typically when fishing for smaller fish. Why? Because smaller fish like perch will bite one of two ways: sometimes they’ll pull the bobber down, and sometimes they’ll take a bait and rise with it.  Set the amount of weight under the long, skinny pencil bobber so it’s just enough to make the bobber float at a 45-degree angle. If a fish hits downward, the bobber tips up. If he hits it rising, the bobber lays flat on the water. Either way, you will see the bite and end up catching more fish! Give it a try.af_1_2_pencil_5_1_2_spring

Fixed bobbers, in my opinion, are also better than slip bobbers when fishing for spawning fish on the beds. Instead of the bait falling straight down, it falls with a pendulum motion on a fixed bobber. From my experience, this triggers strikes from protective spawning fish much better than a vertical drop.

You’re never too young or old to have a blast catching fish with floats. But remember, despite the simplicity of bobber fishing, there are always a few ways to maximize the effectiveness of any presentation. Go get yourself an assortment of bobber styles, shapes and sizes and experiment with them this summer. You’ll be glad you did.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , , ,

 
%d bloggers like this: