RSS

Tag Archives: Soft plastic bait

Strategies for Lazy Walleye

28 (5)They’re there. You know they’re there. In deeper water, you can see them on your fish finder. Or, in shallow water too skinny to move your boat over the fish without spooking them, you simply know from past experience they’re around. Perhaps some subtle bumps or nudges — but no hook-ups — indicate walleyes are present but just not biting. Or at least just not biting anything that moves. Here’s a simple solution. Don’t move your bait. In other words, bring out your dead.

Dead sticking — which basically means tossing a jig out, letting it sink to bottom, and then not moving it for a l-o-n-g time, equates to a war of patience and nerves between your giant-size genius brain on one end of the line and a walleye’s peanut-size brain, staring at the other. Guess who has the advantage?  Definitely not you!   In such conditions, accept some simple facts.

First, walleyes react according to instinct, not thinking. If weather and water and fishing pressure combine and conspire to shut off the bite, amazingly, they’re often all that way.  There’s no way you will get all your fishing buddies to all agree on exhibiting the same mood, based of course upon their superior intellect.

Second, because walleyes are reacting (or not reactive!) in negative fashion, you not only can’t outthink them, but you likely won’t be able to razzle-dazzle them with your array of fancy tackle and gadgets. So your best bet is to stick a food item in their faces and outwait them, hoping to trigger some form of subtle response through sheer time exposure rather than clever tactics.

What comes to mind?   Well, a slip bobber suspending a lively leech just off bottom is a likely candidate, drifted slowly and subtly through prospective spots. So too would be a split shot rig, with you casting a nose-hooked night-crawler on target, letting it descend to bottom, and allowing it to sit there, wiggling enticingly, with walleyes gathered ’round, eyeballing the worm. Occasionally, you could lift the rod tip a few feet to slide the rig a bit closer to the boat, take up slack, and then set the rod down again, waiting for the rod tip to bend, indicating a strike. Pretty darn patient, especially since both tactics would require first anchoring the boat.

27 (3)Are there any slightly more mobile and fractionally more aggressive tactics that might cover a teeny bit more water, especially up in the shallows? Enter dead sticking with a lightweight 1/8-ounce jig, tipped with minnow, half-crawler or leech. Or perhaps even a scented plastic tail (ala bass tactics) although the lack of motion inherent with this system definitely favors live bait in some form, due to its natural lively appearance, scent and taste, even when fished in place.

A DEADLY APPROACH To dead stick a small jig, you needn’t do much different that your normal lift-drop jigging retrieve back to the boat. Except, of course, for the excruciatingly long pauses between lifts of the rod tip. The key is having the confidence to believe a walleye is out there looking at your bait at all times, and to let it sit and soak and tease and tempt and turn that aggravation and exasperation back against the fish, letting the extended pause work in your advantage to eventually fool the walleye into closing the gap, flaring its gills and lightly sucking in the jig. You likely won’t feel much. It might be a tap, but more likely just a sudden slight weight on the end of the line. Tighten up slack while lowering your rod tip to horizontal — if it isn’t already there — and then sweep set the hook.   Thus you should try to minimize slack at all times without tempting yourself to unnecessarily jiggle and wiggle the jig.

25.5 (2)Remember, the extended pause with the jig anchoring the wriggling live bait to the bottom is key to getting bites. The nice thing about dead sticking is that you don’t have to anchor, at least on a calm day. Rather, use your electric trolling motor to creep along, then stop or hover, and make a series of fan casts across a general area to test for the presence of fish. Hopefully, you’ve already established that they’re nearby, because this isn’t a method to be used to locate fish, due to the limited amount of water you’re able to cover. But if you can force yourself into the mode of 30-second pauses between subtle lift-drops of the rod tip, making each cast last at least two or three minutes, then you’re in the dead zone.

The perfect tactic for tempting reluctant biters spread across shallow rock or gravel flats within or adjoining spawning areas; sparse sand grass flats emerging from sandy bottoms; rocky or wood-lined reservoir shorelines where walleyes move shallow to feed aggressively in windy conditions and may linger inactive when the weather turns calm; or basically anytime walleyes are up shallow, skittish and not responding to presentations that move. Turn the tables. Fish lures so slowly that they’re virtually motionless. Bring out your dead.

OTHER DEADLY APPROACHES Think about it. Are you fishing through walleyes that aren’t biting? (It’s a terrible thought, isn’t it?) But is there a nagging feeling at the nape of your neck that your offerings are going unappreciated?

Tone things down, speed wise and action wise. Instead of buzzing along a drop-off with a bottom bouncer, spinner and crawler, switch to a bouncer and plain snell, and creep and crawl along, barely moving, even pausing occasionally. Ultraslow movement requires short lines, with the bouncer barely ticking or slightly suspended above bottom, to prevent it from toppling over at rest. Consider using an upright floating bouncer like the Today’s Tackle Foam Walker, which stands up at rest.

26.25

Extend the principle to other presentations. Casting neutrally buoyant minnow-imitating crank baits isn’t that far unrelated from dead sticking; you pull, then p-a-u-s-e, before pulling again, letting the bait hang there before a walleye’s eyes. The suspense kills them. A three-way rig lets a floating jig head or simple live bait snell hang in place before a river ‘eye. A drop shot rig suspends a live bait or plastic tail above bottom in lakes and reservoirs. Lack of movement is often a key trigger for catching reluctant walleyes, which brings about a closing thought.  Chances are that by this stage in life, however, you’ve been shut down enough times to learn that smooth opening lines don’t guarantee a favorable response and, in fact, can be counter productive. Sometimes, you just have to sit down and do nothing but look good in order to attract attention.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

Tags: , , , ,

FISHING with Soft Plastics

26" walleye

26″ walleye

The evolution of soft plastic baits has greatly advanced over the years virtually giving anglers a wide variety and selection for all game fish. Soft plastics offer many advantages over hard bodied lures such as crank baits and spoons that does not have the soft texture as real food. When a fish strikes a soft plastic bait it feels natural so fish will mouth it longer giving the angler extra time to set the hook. In making soft bait’s the plastic is heated into a liquid form then poured in a mold to replicate the shape, grub, worm, bait fish, crawfish, lizard, frogs, and insects.

During the bait making process additional ingredients can be added to appeal to the fish’s senses such as, scents, layered colors, metal flakes, and flavors. Other significant details of soft baits today in manufacturing is to add life-like realistic features like crescent rings on worms and grubs, floating claws on crawfish, web feet and feelers on amphibians, holographic and translucent flash on shad and minnow baits replicating the scales of bait ish.

Other benefits in fishing with soft plastics are rigging the hook, the point can be buried into the body of the bait where it cannot snag underwater obstructions such as dense weeds, rocks, brush and logs, but yet the hook will penetrate through the soft bait when you set the hook. Another is scents, they can be treated with bottled-paste attractants or purchase them already molded in. Soft plastic’s will hold scents much longer than hard bodied lures that wash off quickly.

Fishing Set-ups with Soft Plastic’s

variety plasticsIn casting or vertical jigging the smallest soft plastic lures for perch use ultra light spinning gear spooled with 4-6lb test monofilament. Species such as walleye  with a mid-sized plastic’s use a medium light to medium spinning gear with 6-10 lb test monofilament. In using larger plastic’s with hooks buried into the bait that requires a strong hook set for large mouth bass and northern pike use medium to medium heavy bait casting gear spooled with 14 to 20lb test low stretch monofilament line. For pike that have the largest plastic’s up to and over 1lb use heavy to extra heavy bait casting gear spooled with 50 to 80lb low stretch abrasion resistance braided line. Many rod manufactures specializes in making powerful fast action rods dedicated for soft plastic fishing.
The popular use by anglers of soft plastics has skyrocketed over the years by the increased number of new products introduced annually by lure companies this is evident with fishing tackle pro shops in store displays, catalog pages for online and print buyers guides.

As a reference listed below are a few of the most commonly used soft plastics in order to help you identify each type.

wormsWorms

The invention of the plastic worm spawned more variations of soft plastic baits than any other in fishing lure history. Grubs, jerk worms, crawfish, tubes, lizards, swim/bait fish all were developed based on the introduction of the soft plastic worm technology back in 1949 by a Ohio lure maker. Worms come in sizes from a few inches for perch up to 12 inches for walleye and pike. The types ( floating and sinking) and the colors of worms made today are in hundreds of thousands with the multitude of color variations and scents. The main fish attracting action components of worms are the texture (ringed, ribbed or smooth) affecting the sink rate and the tail (ribbon, twister, paddle, or straight) which provides vibrations when the worm is moved. In rigging a worm, there are two options pre-rigged with a hook or series of hooks, or using a Texas rig the most common, Carolina rig, wacky rig and the drop shot rig.

grubsGrubs

Fishing with soft plastic grubs has been a longtime favorite among anglers for all species. Grubs are composed of soft plastic round body either ringed, ribbed or smooth, combined with single curly tail, double curly split tail, paddle tail, or straight tails for various actions. Grubs come in various lengths from 1″ up to 12″ and hundreds of colors combinations. The most common use for grubs is tipped on a jig, or as a trailer on an inline spinners and spinner baits. Grubs are also popular to fish using a drop shot rig, split shot rig and Carolina rigs.

bait fish

Bait Fish

Soft plastic bait fish come in numerous sizes and colors to mimic forage fish. Determine what bait fish are in the waters you’re fishing and select a profile size and color to match, for a natural presentation. Usually the smaller the better. Many soft plastic bait fish baits feature a paddle tail that wiggles when retrieved, but others have curly tails and forked tails that give them swimming action. Fishing soft plastic bait fish imitations are an excellent choice jigged along the bottom or brought in on a straight retrieve.

tubesTubes

Tubes are rounded hollow soft plastic bodied bait open-ended with a series of tentacles on the base. The main body is usually smooth but some have a ribbed exterior. The interior hollow design works well with holding liquid or paste scents. Tubes range in sizes from 1″-2″ for perch 3″-6″ for walleye and up to 14″ for big pike. Most often tubes are rigged using a weighted tube jig placed within the tube’s body or to make a tube weedless anglers use a wide gap hook threading it through the nose and securing the hook into the body on the outer wall of the tube. Upon casting a tube it will display a spiral action on the fall with the tentacles undulating providing an injured bait fish look, in jigging the tube off the bottom it will appear as a crawfish imitation especially good for feeding walleye. Tubes can be rigged as bait using a Texas Rig, Carolina Rig, or on a drop shot rig.

crawfishCrawfish

The soft plastic crawfish or crawdad is a deadly on walleye at certain times and when presented along rocky bottom area’s. The main feature of an imitation crawfish is the pinchers when tipped on a jig it gives the bait a realistic defensive posture by raising its claws that sends bass a signal to feed. Crawfish soft plastic’s are available from craw trailers to the highly detailed featuring pinchers, antennae, legs, abdomen and tail.

lizards

Lizards

Although not widely used for walleye these have been known to catch walleye at certain times during the summer.   Lizards come is a wide variety of colors, scents, ribbed, smooth, floating and sinking. The most common fishing techniques are similar to fishing plastic worms, using Texas and Carolina rigs or tipped on a jig for flipping and pitching.

leeches

Leeches & Reepers

Leeches and reapers are a basic variation of a soft plastic grub, rounded head and body leading to a soft thin membrane sides. The smaller reapers resemble a leech while the larger reapers mimic bait fish. The sizes start from 3″ for walleye and bass up to 12″ for pike. Most anglers rig a leech/reaper tipped on a jig head inserting the hook through the head or use a split shot rig and a single hook. Reapers are a good bait to use on waters that receive a high amount of angling pressure.

frogs

Frogs

Using a floating soft plastic frog around heavy weeds for pike is exhilarating as the pike comes out of the water and gulps your lure. The advantages of soft-plastic surface frogs are, they are weedless with the hooks positioned against the body, they feel natural with their soft spongy body, so the bass will hang on to the lure longer giving more time for the angler to set the hook. The best fishing tip we can offer while using a top water frog is fish slow. After a cast let the frog sit until the ripples subside now pop or twitch the frog once or twice, then let the frog sit for a few seconds and repeat. To change-up the presentation upon reaching weed pocket or opening let the frog sit and just barely twitch the frog so just the legs quiver. Summertime pike laying in the weeds aren’t active at these times, but can be enticed by an easy meal.

magnumsMagnum

From the 1950’s through the 1970’s the soft plastic bait industry was focused on worms and grubs used for walleye. That changed in the 1980’s when small basement lure companies started producing larger soft plastic lures designed for pike. This spawned a revolution in the 1990’s regarding the soft plastic lure market as larger companies began taking notice and adding larger soft plastic baits to their product line. Today there are hundreds of variations, colors, combinations of hard bodied soft tail baits, some even weighing 1 lb and 15 inches in length. Fishing with super sized soft plastic’s opened a new chapter and presentation for pike anglers throughout the world.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , , ,

PIKE – Six Proven Lures To Use

White, yellow, and chartreuse are great pike lure colors, probably because they resemble the belly of a struggling food fish.

  1. IN-LINE SPINNER In early spring, before weed growth becomes a factor, focus on covering water. The bigger spinners are a top choice here because the weight lets you cast them farther and the blades throw more flash. Retrieve the spinner steadily, just fast enough to keep it off the bottom. Think Rooster Tail, Mepp’s, and Blue Fox spinners in 1/6- to 1-ounce sizes.
  2. SPOON Start by steadily and slowly reeling, just fast enough to keep the spoon wobbling. If that doesn’t produce, try a “flutter retrieve,” accomplished by imparting a jigging motion as you reel. Spoons are particularly effective along drop offs because you can precisely control the depth. Try Dardevles, Little Cleos, Thomas Buoyants, and Johnson Silver Minnows weighing ¼ to 1 ounce.

  3. 3. MINNOW-IMITATING PLUG Begin with a steady retrieve. If that doesn’t work, try stop-and-start reeling. Early in the season, use a shallow runner. As waters warm up, go to a crank bait or a soft-plastic swimbait that runs in the 10-foot range. You’ve got plenty to choose from here: the Rapala Original or Shad Rap, Rebel Minnow, Rattlin’ Rogue, C.C. Shad, Bomber Model A, Mann’s 1-Minus, and the Storm Wild-Eye Swim Shad.
  4. 4. SPINNERBAIT Draw a spinnerbait past sprouting weeds and stop the retrieve for a three count just as the bait approaches a possible hideout. Add a twist-tail or rubber-worm trailer for action and color contrast. Models abound. If I had to use only one pike lure, it would be a white spinnerbait with a trailer. If the water is a tall off-color, try a bait with a chartreuse skirt.

  5. JIG & a MINNOW or WORM As the temperature in the shallows reaches 60 degrees, pike begin to set up shop along 6- to 10-foot drop offs. These are best fished with a jig in full, 2-to 3-foot hops. Pike often take the jig as it drops; the strike may feel like a nibble or a perch bite. It’s not. Use bucktail and marabou jigs in the ¼- to1-ounce range.

  6. 6. SURFACE PLUG In late spring, fish top-water lures over weed beds in the calm water of morning or late afternoon. Over the years the combination of a slim minnow shape and propeller fuss has been most productive for me. Tie on a large (4½- to 6-inch) Jitterbug, Heddon’s Crazy Crawler or Dying Flutter, Storm Chug Bug, Smithwick Devil’s Horse, Sputter buzz, or Zara Spook.

Follow our HUNTING BLOG

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

 

Tags: , , , , , , , ,

The Weed Warrior

silver-minnow1Whether it’s submerged weeds like cabbage, floating varieties such as lily pads, or emergent plants like reeds, bulrushes, or even flooded terrestrials, pike instinctively gravitate to vegetative cover. When conditions are right, the green zone becomes a gridiron to do battle with toothy weed beasts.

Shrewd pike anglers are adept at using lures and techniques to find and extract fish from these sorts of weed-filled areas. While you can often do well skirting the edges, at times there is no substitute for rolling up your sleeves and digging them out of the heavy stuff. It’s of little surprise then, that weedlessness is a quality shared by many top pike lures (and lure modifications) of our time.

The Johnson Silver Minnow, introduced in the 1920s, remains a consistent producer of weed pike. Northland Tackle’s new Live-Forage Weedless Spoon, with realistic baitfish-image patterns, and the Daredevle Feathered Weedless spoon, are other options of similar design.

Many have written about exchanging treble hooks for single hooks on spoons, which reduces fouling while still permitting efficient hook-sets. Vegetation that gets hung on the hook typically can be ripped free during the retrieve with a few quick snaps of the rod tip, or on a subsequent snap-cast. Add a texposed softbait trailer for more weed proofing.

This slideshow requires JavaScript.

The weedless qualities of many popular bass lures have led them to serve double-duty for pike. When Blue Fox introduced the Roland Martin series spinnerbait, fitted with a then oversized #7 blade, it was an instant favorite for big pike. Today, an expanded range of pike spinnerbaits is available, including the Lindy M&G and Northland Bionic Bucktail spinnerbaits, among many others.

Jigs built for flipping and swimming are another class of weapons for weed pike. Versions of this once exclusive bass bait are now widely available and in larger sizes crossing over to pike. In this category are the J-mac and Lil’ Hustler jigs. Northland’s Jungle Jig, tipped with a plastic trailer, is another good producer for weed pike. Oversize jigs like the J-mac also work well paired with a reaper, lizard, or swimbait, adding unique action, increasing profile, and slowing sink rate.

Anyone who has fished weedless surface frogs can attest to their effectiveness at attracting and hooking pike. While pike tend to damage the softer varieties after a catch or two, newer designs such as the SPRO Bronzeye Pop Frog and Tru Tungsten Mad Maxx are harder than most and put many pike in the boat before needing to be replaced or repaired.

Upsized hollow-bodied swimbaits are among the most recent weed-resistant tools being applied to extract pike from sloppy places. Many varieties run weedless when rigged texposed on an oversized worm hook. Try a Berkley Hollow Belly Swimbait, Yum Money Minnow, or Z-Man SwimmerZ. The Fat Minnow by Basstrix, rigged on a Mustad Ultra Lock (38105), is a personal favorite.

This slideshow requires JavaScript.

When flying north to trophy pike waters, knowledgeable anglers pack a selection of soft-plastic stickbaits and wide-gap hooks. Effective weedless alternatives when slow is key, Bait Rigs’ Reaper Tail or a 9-inch Yum Dinger can be cast easily on unweighted hooks and worked in and along weedy haunts. Where there’s room to swim in vegetation pockets or through stalks, try texposing an oversized curlytail grub, like a Kalin’s 5-inch Lunker Grub on an unweighted wide-gap hook. The seductive slow swim can be irresistible to pike holding in the greenery.

To improve the longevity of soft plastics, consider using screw locks, which can be clipped to the eye of the hook or threaded onto the hook shaft. These modifications can be applied to in-line spinners as well. For especially dense or stubborn vegetation, clip on a hook with a wireguard like the Mustad W3551, making your favorite spoon or spinner weedless.

It’s not a question of whether you’ll find pike in the weeds, but rather when. Productive people have an uncanny ability to turn challenges into opportunity. Snakes in the grass need not carry a negative connotation, providing you’re equipped with the right tools for overcoming salady situations.

48.5" NORTHERN PIKE

48.5″ NORTHERN PIKE

Lure Classics

Snagless In-line

The Snagless Sally made by Hildebrandt is a classic for combing weeds for bass and pike. “The Snagless Sally is one of the most weedless spinner-based lures I’ve ever used,” says In-Fisherman Managing Editor Rob Neumann. “It works well through submerged weeds, but also through floating plants and emergents like lilies, reeds, and rice.” Sally features a single hook with a wire hook-guard and vinyl skirt. “You also can add a plastic or pork trailer, but that’s often not necessary,” he says. Originally available in 1/4- and 3/8-ounce sizes, the Snagless Sally lineup has been expanded to include 1/2-, 3/4-, and 1-ounce sizes, giving pike (and muskie) anglers more options.

Tackle Tip

  • Pegging Plastics

Soft-plastic flukes and stickbaits like Lunker City Slug-Gos and Yum Dingers can be hot tickets to pike in weedy water. Rigged on wide-gap hook, these slow sinkers can be walked, snapped, and paused in midwater to trigger vicious strikes. In-Fisherman John Kolbeck passed along his solutions for rigging these plastics. He was fishing for pike in shallow weedy areas and around fallen timber with Slug-Gos, walking the dog about a foot under water and crawling baits over patches of dead reeds. He connected the hook to a loop in the wire leader to maximize bait action.The problem was that the lure would slide down the hook shank into the hook-bend, preventing solid hook-sets. The first attempt was to peg the lure to the eye of the hook, but this kept the lure from swinging freely on the leader loop. Kolbeck offers three solutions:1. Thread the nose of the lure onto the hook. Double over a short piece of rubber band and thread onto the hook before inserting the hook into the body of the lure. Slide the rubber band piece up past the bait-keeper bend of the hook an tight against the nose of the lure.2. Rig the lure onto the hook, being sure not to cover the hookeye. Insert a toothpick into the bait at a 90-degree angle just in front of the bait-keeper bend in the hook and trim the toothpick ends. 3.  Starting with about a 2-inch section of pipe cleaner, strip about 1/4 inch of the fuzzy material from one end. Attach the bare-wire end to the hookeye, being sure not to foul the loose leader connection. Wrap the fuzzy end of the pipe cleaner around the shank of the hook just above the bait-keeper bend. This option allows you to add a bit of color as well.

Tackle Tip

  • Spoon Modification

Exchanging the treble hook for a single hook on a spoon can make it more weedless. And whatever weeds the hook picks up often can be ripped free with a few sharp snaps of the rod. Lonnie King switches out for single siwash-style hooks where single barbless hooks are mandatory, as is the case in some trophy pike waters in Canada. The Eagle Claw 84 is another good hook option.King suggests installing the hook so its point is on the concave (top) side of the spoon when retrieved. You can also rig a soft plastic trailer texposed to make it even more weedless, and for adding customized actions and profiles. To keep the trailer from slipping down the hook shank, use a clip-on screw-lock like the Tru-Turn HitchHiker ­(ttiblakemore.com), Bass Pro Shops XPS Keeper Spring (basspro.com), or Clinch Spring from First Mate Lures (firstmatelures.com).You can also add an extra split ring, extending the connection and allowing the hook to move more freely.   Use the Fastach Clip from Stringease Tackle ­(stringease.com), which extends the distance between hook and lure and makes hook changes quick and easy.

Follow our HUNTING BLOG

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

Tags: , , , , ,

15 Top Lures For Pike Fishing

2
When the stars align and the feeding window is open, a big  pike will hit anything that moves. Your bait selection doesn’t matter and all you have to do is be in the right place at the right time. If you’re lucky, you’ll experience this feeding-frenzy action once or twice a season. The rest of your time hunting trophy pike will be spent cranking, casting, and waiting. The right presentation will make the difference between a bite and a follow-up. So, don’t waste all of your effort pitching second-rate lures. Here’s our round up of the best pike fishing baits on the market right now.

Heddon Rattlin’ SpookPMlures_01The Spook’s renowned walk-the-dog style has long been a pike pleaser – especially over grass. The Rattlin’ model’s tungsten BBs emit an intense sound that mimics fleeing baitfish. These rattles also serve to enhance the bait’s walking retrieve. ($6.99, Lurenet.com)

Booyah Pikee

PMlures_02Strong and durable, this ½-ounce double willow leaf spinnerbait boasts a tough Vibra-Flx wire frame that stands up to powerful jaws with lots of teeth. The Pikee comes with a 12-inch steel leader for added insurance against big biters. ($5.99, Lurenet.com)

YUM DingerPMlures_03
The 7-inch version of this flexible stickbait does a good job of presenting a baitfish profile for pike and musky. Rig the bait Texas style over weeds or wacky style when working open water. ($5.79, Lurenet.com)

Eppinger Daredevle SpoonPMlures_04a

The 00 size of this classic spoon has seen plenty of teeth mark, and for good reason. The wiggling, wobbling action puts out a lot of flash and vibration to resemble a fleeing baitfish. Trolled or cast, the Daredevle tempts pike and musky in a broad range of depths. ($9.70, Eppinger.net)

Blue Fox Super BouPMlures_05
Big on the visuals and big on fish-grabbing ability, the size 10 Super Bou imitates mature baitfish and sprouts double trebles to snare the toothy predators that seek them. Tandem blades, combined with Marabou, Hackle and Flashabou fibers create a lifelike undulating action, while the free-turning brass gear emits sonic vibration and rattles when it strikes the outer shell. ($21.69, Rapala.com)

Mepps H210PMlures_06
There’s nothing modest about this heavyweight tandem spinner, but big muskies don’t do modest. Nine inches from eye to tail, the 3-ounce H210 emits big-time thump with its twin brass Indiana blades, while a bright 100-percent holographic tail is hand-tied to tandem 7/0 VMC cone cut hooks. ($39.80, Mepps.com)

Suick Weighted Holographic Musky Thriller Jerkbait

PMlures_07
The weighted version of the original Musky Thriller carries its unique shape and enticing wiggle deeper. Holographic finishes shimmer like real baitfish. ($27.70, Suick.com)

Tackle Industries Super D Swimbait
PMlures_08

A whopping 14-inches long with its tail extended, this sturdy swimbait is built around a full Body Lock coil harness that keeps the soft plastic body in place, while connecting two underside trebles to the frame linked to jig head. The 5-ounce Super D counts down at about a foot per second. Jig it, jerk it or crank it; the Super D’s rocking motion and curly tail put on a big show for big muskies. ($13.99, TackleIndustries.com)

Mepps Double Blade Aglia (Size #5)

PMlures_09
The popular Aglia design gains enhanced visual appeal, along with maximum sound and vibration from a second blade. Whether it’s flashing metallic blades or contrasting colors, the dual spinners provide added lift for fishing over weeds or other structure. Vividly colored hand-tied bucktails help make this bait easier for fish to spot. ($6.99, Mepps.com)

Mepps Syclops (Size #3)
PMlures_10a

A real pike pleaser, this sleekly contoured spoon casts easily and trolls effectively at most any common speed. Jig it vertically over deep spots or through the ice. ($4.75, Mepps.com)

Grandma Jointed Lure
PMlures_11b

An old-school classic, the flat body and jointed design yields a wobble and shimmy that drives big muskies crazy. When cast, the bait reaches 3-6 feet; trolled, it goes to 12. Made with high-impact plastic and a tough diving lip, a Grandma will withstand the fiercest attack from a toothy giant. ($17.99, Grandmalures.com)

Northland Fishing Tackle Bionic Bucktail Jig
PMlures_12

Hand-tied with genuine bucktail, this jig features a versatile double line tie that affords the option of vertical jigging deep water or casting and trolling shallow cover. A stinger hook secured to the jig’s Mustad Ultra-Point hook snares any short strikers. ($5.99, Northlandtackle.com)
Cisco Kid Topper
PMlures_13

A torpedo profile body with stainless steel propeller blades on the nose and tail create a big topside disturbance that gets the fish looking in the right direction. Effective for pike and muskie, the Cisco Kid Topper works well at a variety of speeds. ($17.95, Suick.com)

Bass Pro Shops Thump N Deal Swimbait
PMlures_14a

Equipped with a pair of 4/0 short shank trebles, this big bait swims with a slight side-to-side wobble that can be altered by bending and adjusting the internal non-slip body harness. A steady retrieve works best, but an occasional pause or twitch can turn followers into biter. ($17.99, Basspro.com)

Koppers Live Target Jointed Yellow Perch
PMlures_15

Incredibly realistic body shaping, coloration and fishy detail makes this a hard bait for big predators to ignore. Effective for casting or trolling, the jointed body creates an erratic tail kick that closely mimics the swimming motion of a real perch.  ($12.99, KoppersFishing.com)

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , , , , ,

Best Lures for Northern Pike

DSCN4408

luresNorthern pike are exceptional game fish, known for their propensity to hit lures with heart-stopping ferocity and to engage in epic battles once hooked. But northern pike can also be finicky, so being well-prepared with a variety of lures increases your chances for success. An assortment of spoons, spinners, crankbaits and topwater lures should be in the arsenal of every northern pike angler.

Spoons

imagesCACC7OPN

Spoons are most effective because of their wiggling, vibrating movement in the water and the flashes of light that reflect off their metal surfaces. Spoons come in all manner of shapes, sizes and colors, but a good fundamental choice is a spoon of about 4 to 6 inches in length. The color to use varies with water clarity, but, according to “Game and Fish” magazine, red and white spoons are often the best combination to start with. The weight of the spoon determines the depth at which it runs. Heavier, thicker spoons sink faster and run deeper. They are also the best choice for trolling. Dardevle spoons, made by Eppinger, have long been a top choice for anglers. Spoons are generally used with a cast-and-retrieve routine or are trolled, but they are versatile enough to use as jigs or, when retrieved quickly, as surface lures.

Spinnerbaits

spinner-bait-diagram
Spinnerbaits are effective because of the fish-attracting vibrations and light flashes they create when retrieved or trolled. Spinners consist of shiny metal blades with a clevis that spins around a wire shaft. Spinnerbaits often are “dressed” in hair (bucktails), feathers, rubber or fur to increase their attractiveness to northern pike. Anglers often add a soft, plastic-bodied, twister tail, either as a trailer hook (to catch short-striking northerns) or to the treble hook itself. Mepps makes high-quality spinnerbaits in a huge variety of sizes, shapes and variations.

Crankbaits

imagesCAQ2U1JD

Crankbaits are lures designed to resemble bait fish, and you can fish them either by casting and retrieving or trolling behind the boat. Some are designed to run shallow, and some run deep. The experts at Pike Lures.com comment that the majority of crankbaits are manufactured out of plastic, but some companies still use the traditional wooden bodies. Either is a good choice. Generally, a crankbait is painted with a pattern and color that closely matches that of the species upon which the pike feeds, but, sometimes, a wild and unnatural color works even better. Rapala is one of the premier makers of crankbaits, available in either wood or plastic, in a wide variety of sizes and shapes.

Topwater

imagesCAQL6WK0
Topwater lures are about the most exciting type of lure to use for northern pike fishing. Topwaters are designed to create surface commotion, in imitation of a dying fish or swimming animal. Northerns hit these lures explosively at the surface, creating a large and startling splash. Stickbaits, buzzbaits, propeller baits and crawlers are typical variations on the topwater theme, with movement dictated by the angler’s manipulation of the fishing rod. Heddon Company has made such lures since 1894 and continues to produce popular and effective topwater lures.

 

 

Join us at Wawang Lake Resort for some OUTSTANDING fishing!

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

 

Tags: , , , , , , ,

The Weed Warrior

silver-minnow1Whether it’s submerged weeds like cabbage, floating varieties such as lily pads, or emergent plants like reeds, bulrushes, or even flooded terrestrials, pike instinctively gravitate to vegetative cover. When conditions are right, the green zone becomes a gridiron to do battle with toothy weed beasts.

Shrewd pike anglers are adept at using lures and techniques to find and extract fish from these sorts of weed-filled areas. While you can often do well skirting the edges, at times there is no substitute for rolling up your sleeves and digging them out of the heavy stuff. It’s of little surprise then, that weedlessness is a quality shared by many top pike lures (and lure modifications) of our time.

The Johnson Silver Minnow, introduced in the 1920s, remains a consistent producer of weed pike. Northland Tackle’s new Live-Forage Weedless Spoon, with realistic baitfish-image patterns, and the Daredevle Feathered Weedless spoon, are other options of similar design.

Many have written about exchanging treble hooks for single hooks on spoons, which reduces fouling while still permitting efficient hook-sets. Vegetation that gets hung on the hook typically can be ripped free during the retrieve with a few quick snaps of the rod tip, or on a subsequent snap-cast. Add a texposed softbait trailer for more weed proofing.

This slideshow requires JavaScript.

The weedless qualities of many popular bass lures have led them to serve double-duty for pike. When Blue Fox introduced the Roland Martin series spinnerbait, fitted with a then oversized #7 blade, it was an instant favorite for big pike. Today, an expanded range of pike spinnerbaits is available, including the Lindy M&G and Northland Bionic Bucktail spinnerbaits, among many others.

Jigs built for flipping and swimming are another class of weapons for weed pike. Versions of this once exclusive bass bait are now widely available and in larger sizes crossing over to pike. In this category are the J-mac and Lil’ Hustler jigs. Northland’s Jungle Jig, tipped with a plastic trailer, is another good producer for weed pike. Oversize jigs like the J-mac also work well paired with a reaper, lizard, or swimbait, adding unique action, increasing profile, and slowing sink rate.

Anyone who has fished weedless surface frogs can attest to their effectiveness at attracting and hooking pike. While pike tend to damage the softer varieties after a catch or two, newer designs such as the SPRO Bronzeye Pop Frog and Tru Tungsten Mad Maxx are harder than most and put many pike in the boat before needing to be replaced or repaired.

Upsized hollow-bodied swimbaits are among the most recent weed-resistant tools being applied to extract pike from sloppy places. Many varieties run weedless when rigged texposed on an oversized worm hook. Try a Berkley Hollow Belly Swimbait, Yum Money Minnow, or Z-Man SwimmerZ. The Fat Minnow by Basstrix, rigged on a Mustad Ultra Lock (38105), is a personal favorite.

This slideshow requires JavaScript.

When flying north to trophy pike waters, knowledgeable anglers pack a selection of soft-plastic stickbaits and wide-gap hooks. Effective weedless alternatives when slow is key, Bait Rigs’ Reaper Tail or a 9-inch Yum Dinger can be cast easily on unweighted hooks and worked in and along weedy haunts. Where there’s room to swim in vegetation pockets or through stalks, try texposing an oversized curlytail grub, like a Kalin’s 5-inch Lunker Grub on an unweighted wide-gap hook. The seductive slow swim can be irresistible to pike holding in the greenery.

To improve the longevity of soft plastics, consider using screw locks, which can be clipped to the eye of the hook or threaded onto the hook shaft. These modifications can be applied to in-line spinners as well. For especially dense or stubborn vegetation, clip on a hook with a wireguard like the Mustad W3551, making your favorite spoon or spinner weedless.

It’s not a question of whether you’ll find pike in the weeds, but rather when. Productive people have an uncanny ability to turn challenges into opportunity. Snakes in the grass need not carry a negative connotation, providing you’re equipped with the right tools for overcoming salady situations.

Lure Classics

Snagless In-line

The Snagless Sally made by Hildebrandt is a classic for combing weeds for bass and pike. “The Snagless Sally is one of the most weedless spinner-based lures I’ve ever used,” says In-Fisherman Managing Editor Rob Neumann. “It works well through submerged weeds, but also through floating plants and emergents like lilies, reeds, and rice.” Sally features a single hook with a wire hook-guard and vinyl skirt. “You also can add a plastic or pork trailer, but that’s often not necessary,” he says. Originally available in 1/4- and 3/8-ounce sizes, the Snagless Sally lineup has been expanded to include 1/2-, 3/4-, and 1-ounce sizes, giving pike (and muskie) anglers more options.

Tackle Tip

  • Pegging Plastics

Soft-plastic flukes and stickbaits like Lunker City Slug-Gos and Yum Dingers can be hot tickets to pike in weedy water. Rigged on wide-gap hook, these slow sinkers can be walked, snapped, and paused in midwater to trigger vicious strikes. In-Fisherman John Kolbeck passed along his solutions for rigging these plastics. He was fishing for pike in shallow weedy areas and around fallen timber with Slug-Gos, walking the dog about a foot under water and crawling baits over patches of dead reeds. He connected the hook to a loop in the wire leader to maximize bait action.The problem was that the lure would slide down the hook shank into the hook-bend, preventing solid hook-sets. The first attempt was to peg the lure to the eye of the hook, but this kept the lure from swinging freely on the leader loop. Kolbeck offers three solutions:1. Thread the nose of the lure onto the hook. Double over a short piece of rubber band and thread onto the hook before inserting the hook into the body of the lure. Slide the rubber band piece up past the bait-keeper bend of the hook an tight against the nose of the lure.2. Rig the lure onto the hook, being sure not to cover the hookeye. Insert a toothpick into the bait at a 90-degree angle just in front of the bait-keeper bend in the hook and trim the toothpick ends. 3.  Starting with about a 2-inch section of pipe cleaner, strip about 1/4 inch of the fuzzy material from one end. Attach the bare-wire end to the hookeye, being sure not to foul the loose leader connection. Wrap the fuzzy end of the pipe cleaner around the shank of the hook just above the bait-keeper bend. This option allows you to add a bit of color as well.

Tackle Tip

  • Spoon Modification

Exchanging the treble hook for a single hook on a spoon can make it more weedless. And whatever weeds the hook picks up often can be ripped free with a few sharp snaps of the rod. Lonnie King switches out for single siwash-style hooks where single barbless hooks are mandatory, as is the case in some trophy pike waters in Canada. The Eagle Claw 84 is another good hook option.King suggests installing the hook so its point is on the concave (top) side of the spoon when retrieved. You can also rig a soft plastic trailer texposed to make it even more weedless, and for adding customized actions and profiles. To keep the trailer from slipping down the hook shank, use a clip-on screw-lock like the Tru-Turn HitchHiker ­(ttiblakemore.com), Bass Pro Shops XPS Keeper Spring (basspro.com), or Clinch Spring from First Mate Lures (firstmatelures.com).You can also add an extra split ring, extending the connection and allowing the hook to move more freely.   Use the Fastach Clip from Stringease Tackle ­(stringease.com), which extends the distance between hook and lure and makes hook changes quick and easy.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

Tags: , , , , ,

Best Lures for Northern Pike

DSCN4408

luresNorthern pike are exceptional game fish, known for their propensity to hit lures with heart-stopping ferocity and to engage in epic battles once hooked. But northern pike can also be finicky, so being well-prepared with a variety of lures increases your chances for success. An assortment of spoons, spinners, crankbaits and topwater lures should be in the arsenal of every northern pike angler.

Spoons

imagesCACC7OPN

Spoons are most effective because of their wiggling, vibrating movement in the water and the flashes of light that reflect off their metal surfaces. Spoons come in all manner of shapes, sizes and colors, but a good fundamental choice is a spoon of about 4 to 6 inches in length. The color to use varies with water clarity, but, according to “Game and Fish” magazine, red and white spoons are often the best combination to start with. The weight of the spoon determines the depth at which it runs. Heavier, thicker spoons sink faster and run deeper. They are also the best choice for trolling. Dardevle spoons, made by Eppinger, have long been a top choice for anglers. Spoons are generally used with a cast-and-retrieve routine or are trolled, but they are versatile enough to use as jigs or, when retrieved quickly, as surface lures.

Spinnerbaits

spinner-bait-diagram
Spinnerbaits are effective because of the fish-attracting vibrations and light flashes they create when retrieved or trolled. Spinners consist of shiny metal blades with a clevis that spins around a wire shaft. Spinnerbaits often are “dressed” in hair (bucktails), feathers, rubber or fur to increase their attractiveness to northern pike. Anglers often add a soft, plastic-bodied, twister tail, either as a trailer hook (to catch short-striking northerns) or to the treble hook itself. Mepps makes high-quality spinnerbaits in a huge variety of sizes, shapes and variations.

Crankbaits

imagesCAQ2U1JD

Crankbaits are lures designed to resemble bait fish, and you can fish them either by casting and retrieving or trolling behind the boat. Some are designed to run shallow, and some run deep. The experts at Pike Lures.com comment that the majority of crankbaits are manufactured out of plastic, but some companies still use the traditional wooden bodies. Either is a good choice. Generally, a crankbait is painted with a pattern and color that closely matches that of the species upon which the pike feeds, but, sometimes, a wild and unnatural color works even better. Rapala is one of the premier makers of crankbaits, available in either wood or plastic, in a wide variety of sizes and shapes.

Topwater

imagesCAQL6WK0
Topwater lures are about the most exciting type of lure to use for northern pike fishing. Topwaters are designed to create surface commotion, in imitation of a dying fish or swimming animal. Northerns hit these lures explosively at the surface, creating a large and startling splash. Stickbaits, buzzbaits, propeller baits and crawlers are typical variations on the topwater theme, with movement dictated by the angler’s manipulation of the fishing rod. Heddon Company has made such lures since 1894 and continues to produce popular and effective topwater lures.

 

 

Join us at Wawang Lake Resort for some OUTSTANDING fishing!

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

 

Tags: , , , , , , ,

Strategies for Lazy Walleye

28 (5)

They’re there. You know they’re there. In deeper water, you can see them on your fish finder. Or, in shallow water too skinny to move your boat over the fish without spooking them, you simply know from past experience they’re around. Perhaps some subtle bumps or nudges — but no hook-ups — indicate walleyes are present but just not biting. Or at least just not biting anything that moves. Here’s a simple solution. Don’t move your bait. In other words, bring out your dead.

Dead sticking — which basically means tossing a jig out, letting it sink to bottom, and then not moving it for a l-o-n-g time, equates to a war of patience and nerves between your giant-size genius brain on one end of the line and a walleye’s peanut-size brain, staring at the other. Guess who has the advantage?  Definitely not you!   In such conditions, accept some simple facts.

First, walleyes react according to instinct, not thinking. If weather and water and fishing pressure combine and conspire to shut off the bite, amazingly, they’re often all that way.  There’s no way you will get all your fishing buddies to all agree on exhibiting the same mood, based of course upon their superior intellect.

Second, because walleyes are reacting (or not reactive!) in negative fashion, you not only can’t outthink them, but you likely won’t be able to razzle-dazzle them with your array of fancy tackle and gadgets. So your best bet is to stick a food item in their faces and outwait them, hoping to trigger some form of subtle response through sheer time exposure rather than clever tactics.

What comes to mind?   Well, a slip bobber suspending a lively leech just off bottom is a likely candidate, drifted slowly and subtly through prospective spots. So too would be a split shot rig, with you casting a nose-hooked night-crawler on target, letting it descend to bottom, and allowing it to sit there, wiggling enticingly, with walleyes gathered ’round, eyeballing the worm. Occasionally, you could lift the rod tip a few feet to slide the rig a bit closer to the boat, take up slack, and then set the rod down again, waiting for the rod tip to bend, indicating a strike. Pretty darn patient, especially since both tactics would require first anchoring the boat.

27 (3)Are there any slightly more mobile and fractionally more aggressive tactics that might cover a teeny bit more water, especially up in the shallows? Enter dead sticking with a lightweight 1/8-ounce jig, tipped with minnow, half-crawler or leech. Or perhaps even a scented plastic tail (ala bass tactics) although the lack of motion inherent with this system definitely favors live bait in some form, due to its natural lively appearance, scent and taste, even when fished in place.

A DEADLY APPROACH To dead stick a small jig, you needn’t do much different that your normal lift-drop jigging retrieve back to the boat. Except, of course, for the excruciatingly long pauses between lifts of the rod tip. The key is having the confidence to believe a walleye is out there looking at your bait at all times, and to let it sit and soak and tease and tempt and turn that aggravation and exasperation back against the fish, letting the extended pause work in your advantage to eventually fool the walleye into closing the gap, flaring its gills and lightly sucking in the jig. You likely won’t feel much. It might be a tap, but more likely just a sudden slight weight on the end of the line. Tighten up slack while lowering your rod tip to horizontal — if it isn’t already there — and then sweep set the hook.   Thus you should try to minimize slack at all times without tempting yourself to unnecessarily jiggle and wiggle the jig.

25.5 (2)Remember, the extended pause with the jig anchoring the wriggling live bait to the bottom is key to getting bites. The nice thing about dead sticking is that you don’t have to anchor, at least on a calm day. Rather, use your electric trolling motor to creep along, then stop or hover, and make a series of fan casts across a general area to test for the presence of fish. Hopefully, you’ve already established that they’re nearby, because this isn’t a method to be used to locate fish, due to the limited amount of water you’re able to cover. But if you can force yourself into the mode of 30-second pauses between subtle lift-drops of the rod tip, making each cast last at least two or three minutes, then you’re in the dead zone.

The perfect tactic for tempting reluctant biters spread across shallow rock or gravel flats within or adjoining spawning areas; sparse sand grass flats emerging from sandy bottoms; rocky or wood-lined reservoir shorelines where walleyes move shallow to feed aggressively in windy conditions and may linger inactive when the weather turns calm; or basically anytime walleyes are up shallow, skittish and not responding to presentations that move. Turn the tables. Fish lures so slowly that they’re virtually motionless. Bring out your dead.

OTHER DEADLY APPROACHES Think about it. Are you fishing through walleyes that aren’t biting? (It’s a terrible thought, isn’t it?) But is there a nagging feeling at the nape of your neck that your offerings are going unappreciated?

Tone things down, speed wise and action wise. Instead of buzzing along a drop-off with a bottom bouncer, spinner and crawler, switch to a bouncer and plain snell, and creep and crawl along, barely moving, even pausing occasionally. Ultraslow movement requires short lines, with the bouncer barely ticking or slightly suspended above bottom, to prevent it from toppling over at rest. Consider using an upright floating bouncer like the Today’s Tackle Foam Walker, which stands up at rest.

26.25

Extend the principle to other presentations. Casting neutrally buoyant minnow-imitating crank baits isn’t that far unrelated from dead sticking; you pull, then p-a-u-s-e, before pulling again, letting the bait hang there before a walleye’s eyes. The suspense kills them. A three-way rig lets a floating jig head or simple live bait snell hang in place before a river ‘eye. A drop shot rig suspends a live bait or plastic tail above bottom in lakes and reservoirs. Lack of movement is often a key trigger for catching reluctant walleyes, which brings about a closing thought.  Chances are that by this stage in life, however, you’ve been shut down enough times to learn that smooth opening lines don’t guarantee a favorable response and, in fact, can be counter productive. Sometimes, you just have to sit down and do nothing but look good in order to attract attention.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

Tags: , , , ,

The Weed Warrior

silver-minnow1Whether it’s submerged weeds like cabbage, floating varieties such as lily pads, or emergent plants like reeds, bulrushes, or even flooded terrestrials, pike instinctively gravitate to vegetative cover. When conditions are right, the green zone becomes a gridiron to do battle with toothy weed beasts.

Shrewd pike anglers are adept at using lures and techniques to find and extract fish from these sorts of weed-filled areas. While you can often do well skirting the edges, at times there is no substitute for rolling up your sleeves and digging them out of the heavy stuff. It’s of little surprise then, that weedlessness is a quality shared by many top pike lures (and lure modifications) of our time.

The Johnson Silver Minnow, introduced in the 1920s, remains a consistent producer of weed pike. Northland Tackle’s new Live-Forage Weedless Spoon, with realistic baitfish-image patterns, and the Daredevle Feathered Weedless spoon, are other options of similar design.

Many have written about exchanging treble hooks for single hooks on spoons, which reduces fouling while still permitting efficient hook-sets. Vegetation that gets hung on the hook typically can be ripped free during the retrieve with a few quick snaps of the rod tip, or on a subsequent snap-cast. Add a texposed softbait trailer for more weed proofing.

This slideshow requires JavaScript.

The weedless qualities of many popular bass lures have led them to serve double-duty for pike. When Blue Fox introduced the Roland Martin series spinnerbait, fitted with a then oversized #7 blade, it was an instant favorite for big pike. Today, an expanded range of pike spinnerbaits is available, including the Lindy M&G and Northland Bionic Bucktail spinnerbaits, among many others.

Jigs built for flipping and swimming are another class of weapons for weed pike. Versions of this once exclusive bass bait are now widely available and in larger sizes crossing over to pike. In this category are the J-mac and Lil’ Hustler jigs. Northland’s Jungle Jig, tipped with a plastic trailer, is another good producer for weed pike. Oversize jigs like the J-mac also work well paired with a reaper, lizard, or swimbait, adding unique action, increasing profile, and slowing sink rate.

Anyone who has fished weedless surface frogs can attest to their effectiveness at attracting and hooking pike. While pike tend to damage the softer varieties after a catch or two, newer designs such as the SPRO Bronzeye Pop Frog and Tru Tungsten Mad Maxx are harder than most and put many pike in the boat before needing to be replaced or repaired.

Upsized hollow-bodied swimbaits are among the most recent weed-resistant tools being applied to extract pike from sloppy places. Many varieties run weedless when rigged texposed on an oversized worm hook. Try a Berkley Hollow Belly Swimbait, Yum Money Minnow, or Z-Man SwimmerZ. The Fat Minnow by Basstrix, rigged on a Mustad Ultra Lock (38105), is a personal favorite.

This slideshow requires JavaScript.

When flying north to trophy pike waters, knowledgeable anglers pack a selection of soft-plastic stickbaits and wide-gap hooks. Effective weedless alternatives when slow is key, Bait Rigs’ Reaper Tail or a 9-inch Yum Dinger can be cast easily on unweighted hooks and worked in and along weedy haunts. Where there’s room to swim in vegetation pockets or through stalks, try texposing an oversized curlytail grub, like a Kalin’s 5-inch Lunker Grub on an unweighted wide-gap hook. The seductive slow swim can be irresistible to pike holding in the greenery.

To improve the longevity of soft plastics, consider using screw locks, which can be clipped to the eye of the hook or threaded onto the hook shaft. These modifications can be applied to in-line spinners as well. For especially dense or stubborn vegetation, clip on a hook with a wireguard like the Mustad W3551, making your favorite spoon or spinner weedless.

It’s not a question of whether you’ll find pike in the weeds, but rather when. Productive people have an uncanny ability to turn challenges into opportunity. Snakes in the grass need not carry a negative connotation, providing you’re equipped with the right tools for overcoming salady situations.

48.5" NORTHERN PIKE

48.5″ NORTHERN PIKE

Lure Classics

Snagless In-line

The Snagless Sally made by Hildebrandt is a classic for combing weeds for bass and pike. “The Snagless Sally is one of the most weedless spinner-based lures I’ve ever used,” says In-Fisherman Managing Editor Rob Neumann. “It works well through submerged weeds, but also through floating plants and emergents like lilies, reeds, and rice.” Sally features a single hook with a wire hook-guard and vinyl skirt. “You also can add a plastic or pork trailer, but that’s often not necessary,” he says. Originally available in 1/4- and 3/8-ounce sizes, the Snagless Sally lineup has been expanded to include 1/2-, 3/4-, and 1-ounce sizes, giving pike (and muskie) anglers more options.

Tackle Tip

  • Pegging Plastics

Soft-plastic flukes and stickbaits like Lunker City Slug-Gos and Yum Dingers can be hot tickets to pike in weedy water. Rigged on wide-gap hook, these slow sinkers can be walked, snapped, and paused in midwater to trigger vicious strikes. In-Fisherman John Kolbeck passed along his solutions for rigging these plastics. He was fishing for pike in shallow weedy areas and around fallen timber with Slug-Gos, walking the dog about a foot under water and crawling baits over patches of dead reeds. He connected the hook to a loop in the wire leader to maximize bait action.The problem was that the lure would slide down the hook shank into the hook-bend, preventing solid hook-sets. The first attempt was to peg the lure to the eye of the hook, but this kept the lure from swinging freely on the leader loop. Kolbeck offers three solutions:1. Thread the nose of the lure onto the hook. Double over a short piece of rubber band and thread onto the hook before inserting the hook into the body of the lure. Slide the rubber band piece up past the bait-keeper bend of the hook an tight against the nose of the lure.2. Rig the lure onto the hook, being sure not to cover the hookeye. Insert a toothpick into the bait at a 90-degree angle just in front of the bait-keeper bend in the hook and trim the toothpick ends. 3.  Starting with about a 2-inch section of pipe cleaner, strip about 1/4 inch of the fuzzy material from one end. Attach the bare-wire end to the hookeye, being sure not to foul the loose leader connection. Wrap the fuzzy end of the pipe cleaner around the shank of the hook just above the bait-keeper bend. This option allows you to add a bit of color as well.

Tackle Tip

  • Spoon Modification

Exchanging the treble hook for a single hook on a spoon can make it more weedless. And whatever weeds the hook picks up often can be ripped free with a few sharp snaps of the rod. Lonnie King switches out for single siwash-style hooks where single barbless hooks are mandatory, as is the case in some trophy pike waters in Canada. The Eagle Claw 84 is another good hook option.King suggests installing the hook so its point is on the concave (top) side of the spoon when retrieved. You can also rig a soft plastic trailer texposed to make it even more weedless, and for adding customized actions and profiles. To keep the trailer from slipping down the hook shank, use a clip-on screw-lock like the Tru-Turn HitchHiker ­(ttiblakemore.com), Bass Pro Shops XPS Keeper Spring (basspro.com), or Clinch Spring from First Mate Lures (firstmatelures.com).You can also add an extra split ring, extending the connection and allowing the hook to move more freely.   Use the Fastach Clip from Stringease Tackle ­(stringease.com), which extends the distance between hook and lure and makes hook changes quick and easy.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

 

Tags: , , , , ,

 
%d bloggers like this: