RSS

Tag Archives: spinners

SPINNING FOR PIKE

??????????????The #5 Mepps’ steady throb pulsed through the 30-pound Spiderwire, down the length of the medium/heavy-action graphite rod and directly into his hand. Just as the lure reached the edge of the cabbage weeds, the blade’s thrum came to an abrupt halt.   He set the hook hard into what felt like a concrete wall!   But then the wall began to move, and he knew he was into a trophy. Five minutes later and four desperate boatside runs, he lands the 20-pound northern pike.

IT’S SIMPLE:  Big pike LOVE spinners!

Weeds are the keys to spinning big pike crazy as these predators use vegetation to ambush any aquatic creature smaller than themselves.

The Baits
Spinner choices abound, but not all are created equal when it comes to enticing jumbo “scissorbills.” The angler should select certain sizes, shapes, and colors, over others.

szczupak-pospolity-80704Lesson No. 1 in choosing spinners for Esox lucius: bigger always is better. Pick magnum-sized offerings as even hammer-handles attack huge lures with abandon, and to catch true monsters, you MUST have that big profile.

Fat, deeply cupped blades throw out big vibrations that ring the dinner bell for monster pike. While sometimes thinner shaped blades (such as willow-leafs) that spin faster turn the trick; usually the slower-turning Colorado-type blades prove to be the ticket to a pike bonanza.

Because big flash stimulates lunkers, polished silver and gold blades work great. Another killer color combo, especially for use in darker, stained water, is orange blades with a black trailer.

In-Line vs. Offset Spinners
Spinners for northerns come in two basic designs, and both work effectively, but each has its strengths and weaknesses.

This slideshow requires JavaScript.

In-line spinners (such as Mepps, Worden’s Lures Rooster Tails, Panther Martin, and Blue Fox’s Vibrax), with their terminal trebles, have higher hook-up and catch rates than their safety-pin brethren, but they also hook vegetation and other underwater structure, too.

But lures such as Terminators and Stanley Jigs’ Rick Clunn 4-Blade Willow Spinnerbaits, with their single, upturned hooks surrounded by manmade skirts, slither through the weeds, logs and stumps. In-lines also cast like bullets, while offsets can catch the wind and lose momentum.

Line, Leaders
Any of the new “super-lines” such as like Berkley FireLine, Spiderwire Fusion, or Remington’s Power-Lokt, are superior to monofilament for spinning pike angling. Their low stretch and high-abrasion resistance benefit pike anglers.

Flout the convention and tie on a snap/swivel instead of a leader. Leaders inhibit action and deter wary trophies, while the snap swivels provide two major benefits: quick lure changes and eliminating/reducing line twist. True, you’ll lose lures to the razor-sharp choppers of aggressive mounters, but you’ll get lots more bites without leaders!

Speed & Delivery
Often northerns will attack even jet-powered offerings, but slowing down, pausing, or herky-jerkying that spinner, especially when it reaches the “Pike Zone,” reaps big rewards. Even lazy fish will smash a spinnerbait dangled in front on their out-sized mouth.

Always cast beyond where you think the pike lurk, because while “scissorbills” are legendary for their aggressiveness, they don’t like being bombed. Landing a bait on top of one’s head will likely result in spooking it.

Spin-Crazy Times & Spots
Primetime for driving pike spin crazy depends upon the season, time of day, and prevailing weather conditions. Early spring, right after ice out, brings spawned out northern pike shoreward (where they’re most vulnerable). Spinner rigs elicit savage strikes from hungry pike during spring.

Because northerns sight-feed, mid-day piking makes sense. Following that logic, clear, blue-sky days with lots of sun create perfect pike angling weather.

spinner-bait-diagramThe spinner’s flash and large profile, easily visible to cruising whoppers, prove irresistible.

Look for incoming streams or rivers, and concentrate your efforts just off the edges of weedy drop-offs. Weeds are the keys to spinning big pike crazy, as these predators use vegetation to ambush any aquatic creature smaller than themselves. Position the boat on the deep side of the drop-off, and cast the spinner up onto the flat itself, cranking just fast enough to keep the lure above the weeds, and pause when you get to the weed edge. Allow the bait to drift down and find the waiting lunkers, and hang on!

Using spinners to drive northern pike stir crazy is fun, easy, and productive.

Contact us for your next MONSTER PIKE Fishing Trip!

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , ,

Bottom Bouncing Techniques

Baitcaster_ComboThere is one rod and reel set up that some anglers swear by and say works better than any of the other type of equipment – the bait caster.  Then there are anglers who swear by other types of equipment and use them very well, but accordingly to the bait caster operator, those other anglers have to work much harder to accomplish the same productivity.

A bait caster with a flipping switch will allow you to meter out line by engaging the thumb bar and thumbing out the line, when bottom contact has been made, release the thumb bar and the reel automatically engages in the static position – or simply put the spool is locked up. This allows for one hand operation and helpful when bouncing all day. It helps you from getting tired too. The drag should be set at medium strong tension, you can pull out line, but too not easily.

A recommended rod is the St. Croix PC 66M. This rod is 6’6” with medium action and a fast tip. Pull 1 ½ to 2 oz of lead because the depths worked in the summer will be in the 20′ range. That is the home of summer walleye. Sure you may find them deeper, or shallower, but they spend most of their time in that 20’range.   Remember not all medium rod actions are created equal. This rod has fast tip and plenty of backbone. If you are going to try another rod, hang a two ounce bouncer off the tip and shake the rod up and down. It will be obvious if the rod is too whippy and this you don’t want.trilene xt  You want to see a little bit of bend but not a bow in the rod.  The drag of the spinner and the line will add further weight to the tip.   There are many types of line out there but one to consider using would be 10 # Trilene XT.  It’s tough and it stands up under abrasive conditions but try to stay away from the no stretch hi-tech lines.  There is no give with those types, so the rod has to handle all the shock.   A lot of ripped lips and lost fish is the outcome and we don’t want that.

There are excellent anglers who use a spinning rod and reel for the bottom bouncing presentation, but with bouncing it’s harder to operate spin cast reels than the bait casting setup.  However, if this is your choice of equipment here is a few tips to remember.

  • The rod should have a fast tip and enough backbone to handle the 2 oz.
  • The medium sized spinning reels work good, don’t go to small otherwise you won’t be able to put enough line on the reel and will be quickly adding new line.
  • The best way to let line out is to definitely not let the rig free fall. All this will accomplish is to put twist in the line and create a jumbo mess between the line and the rig. Line needs to be metered out.   Let four or five loops come out from the reel and then interject your finger against the spool. This will stop the descent, pause for a second, and then do the same thing until you find the bottom.
  • A controlled descent is the only way. Even though this rig isn’t the easiest setup it is do-able, it is workable, and for those who only have one type of rod, it can be done.

Bouncers, Snell’s & Blades

walgrthrMost of the lakes in northwestern Ontario are rocky bottoms generally and if you drag a bouncer you are going to get hung up, or, if pulling a Snell that is too long and consequently rides too low, same thing will happen.  A preferred type is the Lite Bite setup by Quick Change because the line runs through a weight snap and allows you to feed line out on lazy fish.  Similar to the way line goes through a Lindy Rig weight. The bouncer is straightforward with a single wire strand with lead half way down.  Be sure to carry weights from 1/2 oz. to 2 oz., lighter for shallower fishing and heavier for 20+ depths.

Snells in the 30″ range works best but a little more difficult in clearer waters.  The bouncing style used is to run the bouncer a foot off the bottom and then bounce it on the bottom to a cadence.   The snell should be approximately 30”  and should ride lower than the bouncer; it’s right in the fish zone then.  Snells with either two or three hooks are most preferred. Hooks placed about 2.5 inches apart seem to hook up good. Of course, a Quick Change clevis is a must in order to change blades often and eventually finding the hot blade for catching.

DEEP CUP NEON COLORS FLUORESCENTSnell test is 14 pounds, but can vary with your preference but always high quality mono, never Spider Wire.  For beads, use 4 or 5mm in a variety of colors.   Use a stacker bead with one bead ahead of it next to the clevis it’s easy to assemble and works just as well.

For blades carry a mixture of Colorado’s, Indiana’s, and willows—with equal amounts of each in small, medium (most), and large sizes.  Hammered colors worked best in nickel (silver), brass, gold, and copper. Plus, a mixture of the other colors.   Have a few darks for the dark days.   Use Colorado’s early in the season until the fish get warmed up and begin hitting.  Colorado’s are the preference of most blades. As the waters warms, speed up and use the slider———–the Indiana. Then during the warmest water of the season, run the fast ball—the willows.    Always remember to keep things simple and you’ll be sure to catch fish.

Bouncing is really a simple presentation, there is just a few important techniques that we’ll go over, and after one trip to Canada, you will have it down pat. Your fishing will never be the same, guaranteed and your fishing catching confidence will grow tremendously.

Bottom Bouncing – The Technique
Begin with 1 oz. of bouncer weight for every ten feet of depth fishing. Unless, there are special circumstances, such as running extra fast, then run heavier weights; sometimes two 2 oz. attached to the weight snap. You can attach more than one bouncer to a weight snap if you need to run heavier set ups.  For instance you have marked fish in 20’, which is a depth range that most common for summer fishing and where the walleye will be.   A good setup would be a 2 oz. bouncers a willow leaf. The fish will almost knock the rod out of your hands.

Be sure to have approximately a 40 degree line angle going into the water. Gives the best hook set and best bottom control. With too little line angle you won’t get a good hook set, and with too much angle you won’t get good bottom control, except a lot of snags.  Neither is desirable.  What determines line angle?   Bouncer weight and boat speed.

bottombouncerrigwhiteWith this type of set up use night-crawlers, leeches or minnow but many swear by crawlers in this instance. The new plastic worms or gulp will work too.  However, they won’t be as productive compared to fresh healthy live bait, but still good to use in a pinch.

In letting the line out, press the thumb bar and while keeping your thumb on the spool controlling the rate of decent, meter out the line until the rig makes contact with the bottom. Another key point here, if you let the rig free fall, you will get line twist and possibly a big mess besides and in some cases the rig will be rendered useless. So let the line out steady and slow.

Ok, you are on the bottom. Engage the reel, and lift up the rod tip up a foot. In a couple of seconds bounce the bottom. If you don’t feel the bottom, let out more line, not too much just enough to find the bottom. Engage the reel again and lift the rod tip up foot. Then bounce the bottom to a cadence, don’t drag it. The Snell will ride lower than the weight but will be in the prime fish zone and above the snags. Once you feel that tug, drop your rod tip back towards the fish and then slam it forward – setting the hook, hard.

If you get snagged, it is best to go back directly over the snag and rip straight up, it should come out fairly easily every time. If you try to rip it out from an angle, you will seldom get it loose.

When going through a school of fish and not catching, try changing blades, styles or both. Don’t hesitate to change blades. However, you can never underestimate a hammered finish blade that will outdo the other colors most of the time.  Once you master the techniques of bottom bouncing you will catch more fish than when jig fishing. Actually the best setup is using the bouncer to find them and if they are grouped switch over to jigging, otherwise stay with the bouncer. It is the best search tool on the Canadian Shield lakes to find and catch walleye.  It will transform an amateur into a pro very quickly.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , , ,

SPINNING FOR PIKE

??????????????

The #5 Mepps’ steady throb pulsed through the 30-pound Spiderwire, down the length of the medium/heavy-action graphite rod and directly into his hand. Just as the lure reached the edge of the cabbage weeds, the blade’s thrum came to an abrupt halt.   He set the hook hard into what felt like a concrete wall!   But then the wall began to move, and he knew he was into a trophy. Five minutes later and four desperate boatside runs, he lands the 20-pound northern pike.

IT’S SIMPLE:  Big pike LOVE spinners!

Weeds are the keys to spinning big pike crazy as these predators use vegetation to ambush any aquatic creature smaller than themselves.

The Baits
Spinner choices abound, but not all are created equal when it comes to enticing jumbo “scissorbills.” The angler should select certain sizes, shapes, and colors, over others.

szczupak-pospolity-80704Lesson No. 1 in choosing spinners for Esox lucius: bigger always is better. Pick magnum-sized offerings as even hammer-handles attack huge lures with abandon, and to catch true monsters, you MUST have that big profile.

Fat, deeply cupped blades throw out big vibrations that ring the dinner bell for monster pike. While sometimes thinner shaped blades (such as willow-leafs) that spin faster turn the trick; usually the slower-turning Colorado-type blades prove to be the ticket to a pike bonanza.

Because big flash stimulates lunkers, polished silver and gold blades work great. Another killer color combo, especially for use in darker, stained water, is orange blades with a black trailer.

In-Line vs. Offset Spinners
Spinners for northerns come in two basic designs, and both work effectively, but each has its strengths and weaknesses.

This slideshow requires JavaScript.

In-line spinners (such as Mepps, Worden’s Lures Rooster Tails, Panther Martin, and Blue Fox’s Vibrax), with their terminal trebles, have higher hook-up and catch rates than their safety-pin brethren, but they also hook vegetation and other underwater structure, too.

But lures such as Terminators and Stanley Jigs’ Rick Clunn 4-Blade Willow Spinnerbaits, with their single, upturned hooks surrounded by manmade skirts, slither through the weeds, logs and stumps. In-lines also cast like bullets, while offsets can catch the wind and lose momentum.

Line, Leaders
Any of the new “super-lines” such as like Berkley FireLine, Spiderwire Fusion, or Remington’s Power-Lokt, are superior to monofilament for spinning pike angling. Their low stretch and high-abrasion resistance benefit pike anglers.

Flout the convention and tie on a snap/swivel instead of a leader. Leaders inhibit action and deter wary trophies, while the snap swivels provide two major benefits: quick lure changes and eliminating/reducing line twist. True, you’ll lose lures to the razor-sharp choppers of aggressive mounters, but you’ll get lots more bites without leaders!

Speed & Delivery
Often northerns will attack even jet-powered offerings, but slowing down, pausing, or herky-jerkying that spinner, especially when it reaches the “Pike Zone,” reaps big rewards. Even lazy fish will smash a spinnerbait dangled in front on their out-sized mouth.

Always cast beyond where you think the pike lurk, because while “scissorbills” are legendary for their aggressiveness, they don’t like being bombed. Landing a bait on top of one’s head will likely result in spooking it.

Spin-Crazy Times & Spots
Primetime for driving pike spin crazy depends upon the season, time of day, and prevailing weather conditions. Early spring, right after ice out, brings spawned out northern pike shoreward (where they’re most vulnerable). Spinner rigs elicit savage strikes from hungry pike during spring.

Because northerns sight-feed, mid-day piking makes sense. Following that logic, clear, blue-sky days with lots of sun create perfect pike angling weather.

spinner-bait-diagramThe spinner’s flash and large profile, easily visible to cruising whoppers, prove irresistible.

Look for incoming streams or rivers, and concentrate your efforts just off the edges of weedy drop-offs. Weeds are the keys to spinning big pike crazy, as these predators use vegetation to ambush any aquatic creature smaller than themselves. Position the boat on the deep side of the drop-off, and cast the spinner up onto the flat itself, cranking just fast enough to keep the lure above the weeds, and pause when you get to the weed edge. Allow the bait to drift down and find the waiting lunkers, and hang on!

Using spinners to drive northern pike stir crazy is fun, easy, and productive.

Contact us for your next MONSTER PIKE Fishing Trip!

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , ,

SPINNING FOR PIKE

??????????????

The #5 Mepps’ steady throb pulsed through the 30-pound Spiderwire, down the length of the medium/heavy-action graphite rod and directly into his hand. Just as the lure reached the edge of the cabbage weeds, the blade’s thrum came to an abrupt halt.   He set the hook hard into what felt like a concrete wall!   But then the wall began to move, and he knew he was into a trophy. Five minutes later and four desperate boatside runs, he lands the 20-pound northern pike.

IT’S SIMPLE:  Big pike LOVE spinners!

Weeds are the keys to spinning big pike crazy as these predators use vegetation to ambush any aquatic creature smaller than themselves.

The Baits
Spinner choices abound, but not all are created equal when it comes to enticing jumbo “scissorbills.” The angler should select certain sizes, shapes, and colors, over others.

szczupak-pospolity-80704Lesson No. 1 in choosing spinners for Esox lucius: bigger always is better. Pick magnum-sized offerings as even hammer-handles attack huge lures with abandon, and to catch true monsters, you MUST have that big profile.

Fat, deeply cupped blades throw out big vibrations that ring the dinner bell for monster pike. While sometimes thinner shaped blades (such as willow-leafs) that spin faster turn the trick; usually the slower-turning Colorado-type blades prove to be the ticket to a pike bonanza.

Because big flash stimulates lunkers, polished silver and gold blades work great. Another killer color combo, especially for use in darker, stained water, is orange blades with a black trailer.

In-Line vs. Offset Spinners
Spinners for northerns come in two basic designs, and both work effectively, but each has its strengths and weaknesses.

This slideshow requires JavaScript.

In-line spinners (such as Mepps, Worden’s Lures Rooster Tails, Panther Martin, and Blue Fox’s Vibrax), with their terminal trebles, have higher hook-up and catch rates than their safety-pin brethren, but they also hook vegetation and other underwater structure, too.

But lures such as Terminators and Stanley Jigs’ Rick Clunn 4-Blade Willow Spinnerbaits, with their single, upturned hooks surrounded by manmade skirts, slither through the weeds, logs and stumps. In-lines also cast like bullets, while offsets can catch the wind and lose momentum.

Line, Leaders
Any of the new “super-lines” such as like Berkley FireLine, Spiderwire Fusion, or Remington’s Power-Lokt, are superior to monofilament for spinning pike angling. Their low stretch and high-abrasion resistance benefit pike anglers.

Flout the convention and tie on a snap/swivel instead of a leader. Leaders inhibit action and deter wary trophies, while the snap swivels provide two major benefits: quick lure changes and eliminating/reducing line twist. True, you’ll lose lures to the razor-sharp choppers of aggressive mounters, but you’ll get lots more bites without leaders!

Speed & Delivery
Often northerns will attack even jet-powered offerings, but slowing down, pausing, or herky-jerkying that spinner, especially when it reaches the “Pike Zone,” reaps big rewards. Even lazy fish will smash a spinnerbait dangled in front on their out-sized mouth.

Always cast beyond where you think the pike lurk, because while “scissorbills” are legendary for their aggressiveness, they don’t like being bombed. Landing a bait on top of one’s head will likely result in spooking it.

Spin-Crazy Times & Spots
Primetime for driving pike spin crazy depends upon the season, time of day, and prevailing weather conditions. Early spring, right after ice out, brings spawned out northern pike shoreward (where they’re most vulnerable). Spinner rigs elicit savage strikes from hungry pike during spring.

Because northerns sight-feed, mid-day piking makes sense. Following that logic, clear, blue-sky days with lots of sun create perfect pike angling weather.

spinner-bait-diagramThe spinner’s flash and large profile, easily visible to cruising whoppers, prove irresistible.

Look for incoming streams or rivers, and concentrate your efforts just off the edges of weedy drop-offs. Weeds are the keys to spinning big pike crazy, as these predators use vegetation to ambush any aquatic creature smaller than themselves. Position the boat on the deep side of the drop-off, and cast the spinner up onto the flat itself, cranking just fast enough to keep the lure above the weeds, and pause when you get to the weed edge. Allow the bait to drift down and find the waiting lunkers, and hang on!

Using spinners to drive northern pike stir crazy is fun, easy, and productive.

Contact us for your next MONSTER PIKE Fishing Trip!

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , ,

Spinner Rigs Slay Walleye

2seriousdblLGAre you looking for a simple, yet effective walleye bait that is inexpensive and will have you limiting out on Wawang Lake? Look no further, as the spinner rig may be the answer to your prayers. By learning what the rig consists of, how and where to fish it, and the reason why walleye love it so much, you will be on your way to a phenomenal season of fishing – and that’s what each of us wants, isn’t it?

What the Heck is a Spinner Rig?

A spinner rig is quite basic in its design, but do not let that fool you. This bait catches fish! The rig itself is made up of a spinner blade put onto your main line, followed by a few plastic beads. You then attach a short-shanked hook, and sometimes followed by another one a few inches down the line. And there you have it.  Either the double hook rig, or, single hook rig work well, but, with large or long baits a double hook rig is suggested.

sliding sinker bottom rigThe only thing missing is to attach a weight (called a walking sinker) one to four feet up the line from the spinner and you are good to go. A fat, juicy live bait is then hooked once through the head with the first hook, and then hooked halfway down the body by the second hook. This will be what the hungry walleye will key-in on. If this description sounds confusing, don’t let it phase you, as you can purchase pre-made spinner rigs at your local tackle shop for fewer than two dollars.

How to Fish It?

The basic technique for fishing spinner rigs is to slowly troll or drift these baits behind the boat. The walking sinker that is attached to your line will slowly drag on bottom, (most walking sinkers are relatively snag-proof), and, depending on the length of line you left between your weight and hook, will be the distance the rig will run up off the bottom.

Many anglers prefer to slowly drift across productive structure areas pulling spinner rigs, as they can maintain contact at all times with the bottom, (where the walleye like to hang out), and the presentation will be less rushed than a trolling pattern with the big motor would be. This is not to say that you can’t catch walleye by trolling, but the key reason these spinners work is the action and   enticement they offer the walleye at these slow and deliberate speeds.

Experimentation is often your best bet when it comes to choosing blade and bead colors.   Generally, bright colors will get the nod, although I have had days when the simple switch from an orange blade to a yellow one made all the difference.   Since they are an inexpensive bait to buy, or make, I suggest carrying an assortment with different size blades and colors to see which ones attract the wandering walleye best.

Where to Fish It?

wi0703_DeadWalleySpinner rigs   really shine at a number of specific areas of a lake. Rock shoals and drop-offs are key spots to try as they are walleye magnets, and fish on these spots will generally be relating to the bottom contour – the exact spot these rigs travel. Other spots to try are alongside the edge of weed lines, and through wide-open flats that typically hold walleye. Out in front of dams and alongside current break areas have also been successful areas for me when using these rigs.

 

Weed cover can foul these baits so it is best to fish them in open water over bottom structure such as sand, gravel or rock. If the sinker does happen to snag, a simple tug will break the “drop line”, leaving your main rig intact.

Why Does it Work?

The three main reasons that spinner rigs are so successful in catching walleye are the sight, sound and smell factors they possess. The flash of a spinner whirling   in the water will always grab a fish’s attention. The dirt and sediment kicked up by the walking sinker will accomplish this also. Both of these factors will also cause vibrations and sound in the water column that are attractive to the walleye. Finally, the night crawler is the “ace in the hole”, as any following fish will not be able to resist the smell and taste of that juicy morsel, fluttering through the water.

# 1 choice of lure for Lahrman Group 6/2013
# 1 choice of lure for Lahrman Group for the last 12 years.

Take a   “spin” with this proven rig this season, and see for yourself its fish catching qualities. It may not look like much, but I can assure you that it sure puts a magical spell on the resident walleye.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , , ,

Spinner Rigs Slay Walleye

2seriousdblLGAre you looking for a simple, yet effective walleye bait that is inexpensive and will have you limiting out on Wawang Lake? Look no further, as the spinner rig may be the answer to your prayers. By learning what the rig consists of, how and where to fish it, and the reason why walleye love it so much, you will be on your way to a phenomenal season of fishing – and that’s what each of us wants, isn’t it?

What the Heck is a Spinner Rig?

A spinner rig is quite basic in its design, but do not let that fool you. This bait catches fish! The rig itself is made up of a spinner blade put onto your main line, followed by a few plastic beads. You then attach a short-shanked hook, and sometimes followed by another one a few inches down the line. And there you have it.  Either the double hook rig, or, single hook rig work well, but, with large or long baits a double hook rig is suggested.

sliding sinker bottom rigThe only thing missing is to attach a weight (called a walking sinker) one to four feet up the line from the spinner and you are good to go. A fat, juicy live bait is then hooked once through the head with the first hook, and then hooked halfway down the body by the second hook. This will be what the hungry walleye will key-in on. If this description sounds confusing, don’t let it phase you, as you can purchase pre-made spinner rigs at your local tackle shop for fewer than two dollars.

How to Fish It?

The basic technique for fishing spinner rigs is to slowly troll or drift these baits behind the boat. The walking sinker that is attached to your line will slowly drag on bottom, (most walking sinkers are relatively snag-proof), and, depending on the length of line you left between your weight and hook, will be the distance the rig will run up off the bottom.

Many anglers prefer to slowly drift across productive structure areas pulling spinner rigs, as they can maintain contact at all times with the bottom, (where the walleye like to hang out), and the presentation will be less rushed than a trolling pattern with the big motor would be. This is not to say that you can’t catch walleye by trolling, but the key reason these spinners work is the action and   enticement they offer the walleye at these slow and deliberate speeds.

 

Experimentation is often your best bet when it comes to choosing blade and bead colors.   Generally, bright colors will get the nod, although I have had days when the simple switch from an orange blade to a yellow one made all the difference.   Since they are an inexpensive bait to buy, or make, I suggest carrying an assortment with different size blades and colors to see which ones attract the wandering walleye best.

Where to Fish It?

wi0703_DeadWalleySpinner rigs   really shine at a number of specific areas of a lake. Rock shoals and drop-offs are key spots to try as they are walleye magnets, and fish on these spots will generally be relating to the bottom contour – the exact spot these rigs travel. Other spots to try are alongside the edge of weed lines, and through wide-open flats that typically hold walleye. Out in front of dams and alongside current break areas have also been successful areas for me when using these rigs.

Weed cover can foul these baits so it is best to fish them in open water over bottom structure such as sand, gravel or rock. If the sinker does happen to snag, a simple tug will break the “drop line”, leaving your main rig intact.

Why Does it Work?

The three main reasons that spinner rigs are so successful in catching walleye are the sight, sound and smell factors they possess. The flash of a spinner whirling   in the water will always grab a fish’s attention. The dirt and sediment kicked up by the walking sinker will accomplish this also. Both of these factors will also cause vibrations and sound in the water column that are attractive to the walleye. Finally, the night crawler is the “ace in the hole”, as any following fish will not be able to resist the smell and taste of that juicy morsel, fluttering through the water.

 

# 1 choice of lure for Lahrman Group 6/2013
# 1 choice of lure for Lahrman Group for the last 15 years.

Take a   “spin” with this proven rig this season, and see for yourself its fish catching qualities. It may not look like much, but I can assure you that it sure puts a magical spell on the resident walleye.

Join us at http://www.wawangresort.com

 

Tags: , , , , , , , , ,

Bottom Bouncing Techniques

Baitcaster_ComboThere is one rod and reel set up that some anglers swear by and say works better than any of the other type of equipment – the bait caster.  Then there are anglers who swear by other types of equipment and use them very well, but accordingly to the bait caster operator, those other anglers have to work much harder to accomplish the same productivity.

A bait caster with a flipping switch will allow you to meter out line by engaging the thumb bar and thumbing out the line, when bottom contact has been made, release the thumb bar and the reel automatically engages in the static position – or simply put the spool is locked up. This allows for one hand operation and helpful when bouncing all day. It helps you from getting tired too. The drag should be set at medium strong tension, you can pull out line, but too not easily.

A recommended rod is the St. Croix PC 66M. This rod is 6’6” with medium action and a fast tip. Pull 1 ½ to 2 oz of lead because the depths worked in the summer will be in the 20′ range. That is the home of summer walleye. Sure you may find them deeper, or shallower, but they spend most of their time in that 20’range.   Remember not all medium rod actions are created equal. This rod has fast tip and plenty of backbone. If you are going to try another rod, hang a two ounce bouncer off the tip and shake the rod up and down. It will be obvious if the rod is too whippy and this you don’t want.trilene xt  You want to see a little bit of bend but not a bow in the rod.  The drag of the spinner and the line will add further weight to the tip.   There are many types of line out there but one to consider using would be 10 # Trilene XT.  It’s tough and it stands up under abrasive conditions but try to stay away from the no stretch hi-tech lines.  There is no give with those types, so the rod has to handle all the shock.   A lot of ripped lips and lost fish is the outcome and we don’t want that.

There are excellent anglers who use a spinning rod and reel for the bottom bouncing presentation, but with bouncing it’s harder to operate spin cast reels than the bait casting setup.  However, if this is your choice of equipment here is a few tips to remember.

  • The rod should have a fast tip and enough backbone to handle the 2 oz.
  • The medium sized spinning reels work good, don’t go to small otherwise you won’t be able to put enough line on the reel and will be quickly adding new line.
  • The best way to let line out is to definitely not let the rig free fall. All this will accomplish is to put twist in the line and create a jumbo mess between the line and the rig. Line needs to be metered out.   Let four or five loops come out from the reel and then interject your finger against the spool. This will stop the descent, pause for a second, and then do the same thing until you find the bottom.
  • A controlled descent is the only way. Even though this rig isn’t the easiest setup it is do-able, it is workable, and for those who only have one type of rod, it can be done.

Bouncers, Snell’s & Blades

walgrthrMost of the lakes in northwestern Ontario are rocky bottoms generally and if you drag a bouncer you are going to get hung up, or, if pulling a Snell that is too long and consequently rides too low, same thing will happen.  A preferred type is the Lite Bite setup by Quick Change because the line runs through a weight snap and allows you to feed line out on lazy fish.  Similar to the way line goes through a Lindy Rig weight. The bouncer is straightforward with a single wire strand with lead half way down.  Be sure to carry weights from 1/2 oz. to 2 oz., lighter for shallower fishing and heavier for 20+ depths.

Snells in the 30″ range works best but a little more difficult in clearer waters.  The bouncing style used is to run the bouncer a foot off the bottom and then bounce it on the bottom to a cadence.   The snell should be approximately 30”  and should ride lower than the bouncer; it’s right in the fish zone then.  Snells with either two or three hooks are most preferred. Hooks placed about 2.5 inches apart seem to hook up good. Of course, a Quick Change clevis is a must in order to change blades often and eventually finding the hot blade for catching.

DEEP CUP NEON COLORS FLUORESCENTSnell test is 14 pounds, but can vary with your preference but always high quality mono, never Spider Wire.  For beads, use 4 or 5mm in a variety of colors.   Use a stacker bead with one bead ahead of it next to the clevis it’s easy to assemble and works just as well.

For blades carry a mixture of Colorado’s, Indiana’s, and willows—with equal amounts of each in small, medium (most), and large sizes.  Hammered colors worked best in nickel (silver), brass, gold, and copper. Plus, a mixture of the other colors.   Have a few darks for the dark days.   Use Colorado’s early in the season until the fish get warmed up and begin hitting.  Colorado’s are the preference of most blades. As the waters warms, speed up and use the slider———–the Indiana. Then during the warmest water of the season, run the fast ball—the willows.    Always remember to keep things simple and you’ll be sure to catch fish.

Bouncing is really a simple presentation, there is just a few important techniques that we’ll go over, and after one trip to Canada, you will have it down pat. Your fishing will never be the same, guaranteed and your fishing catching confidence will grow tremendously.

Bottom Bouncing – The Technique
Begin with 1 oz. of bouncer weight for every ten feet of depth fishing. Unless, there are special circumstances, such as running extra fast, then run heavier weights; sometimes two 2 oz. attached to the weight snap. You can attach more than one bouncer to a weight snap if you need to run heavier set ups.  For instance you have marked fish in 20’, which is a depth range that most common for summer fishing and where the walleye will be.   A good setup would be a 2 oz. bouncers a willow leaf. The fish will almost knock the rod out of your hands.

Be sure to have approximately a 40 degree line angle going into the water. Gives the best hook set and best bottom control. With too little line angle you won’t get a good hook set, and with too much angle you won’t get good bottom control, except a lot of snags.  Neither is desirable.  What determines line angle?   Bouncer weight and boat speed.

bottombouncerrigwhiteWith this type of set up use night-crawlers, leeches or minnow but many swear by crawlers in this instance. The new plastic worms or gulp will work too.  However, they won’t be as productive compared to fresh healthy live bait, but still good to use in a pinch.

In letting the line out, press the thumb bar and while keeping your thumb on the spool controlling the rate of decent, meter out the line until the rig makes contact with the bottom. Another key point here, if you let the rig free fall, you will get line twist and possibly a big mess besides and in some cases the rig will be rendered useless. So let the line out steady and slow.

Ok, you are on the bottom. Engage the reel, and lift up the rod tip up a foot. In a couple of seconds bounce the bottom. If you don’t feel the bottom, let out more line, not too much just enough to find the bottom. Engage the reel again and lift the rod tip up foot. Then bounce the bottom to a cadence, don’t drag it. The Snell will ride lower than the weight but will be in the prime fish zone and above the snags. Once you feel that tug, drop your rod tip back towards the fish and then slam it forward – setting the hook, hard.

If you get snagged, it is best to go back directly over the snag and rip straight up, it should come out fairly easily every time. If you try to rip it out from an angle, you will seldom get it loose.

When going through a school of fish and not catching, try changing blades, styles or both. Don’t hesitate to change blades. However, you can never underestimate a hammered finish blade that will outdo the other colors most of the time.  Once you master the techniques of bottom bouncing you will catch more fish than when jig fishing. Actually the best setup is using the bouncer to find them and if they are grouped switch over to jigging, otherwise stay with the bouncer. It is the best search tool on the Canadian Shield lakes to find and catch walleye.  It will transform an amateur into a pro very quickly.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Enter your email address to follow this blog and receive notifications of new posts by email.

 

Tags: , , , , , , , , ,

 
%d bloggers like this: