SPINNING FOR PIKE

The #5 Mepps’ steady throb pulsed through the 30-pound Spiderwire, down the length of the medium/heavy-action graphite rod and directly into his hand. Just as the lure reached the edge of the cabbage weeds, the blade’s thrum came to an abrupt halt.   He set the hook hard into what felt like a concrete wall!   But then the wall began to move, and he knew he was into a trophy. Five minutes later and four desperate boatside runs, he lands the 20-pound northern pike.

IT’S SIMPLE:  Big pike LOVE spinners!

Weeds are the keys to spinning big pike crazy as these predators use vegetation to ambush any aquatic creature smaller than themselves.

The Baits
Spinner choices abound, but not all are created equal when it comes to enticing jumbo “scissorbills.” The angler should select certain sizes, shapes, and colors, over others.

Lesson No. 1 in choosing spinners for Esox lucius: bigger always is better. Pick magnum-sized offerings as even hammer-handles attack huge lures with abandon, and to catch true monsters, you MUST have that big profile.

Fat, deeply cupped blades throw out big vibrations that ring the dinner bell for monster pike. While sometimes thinner shaped blades (such as willow-leafs) that spin faster turn the trick; usually the slower-turning Colorado-type blades prove to be the ticket to a pike bonanza.

Because big flash stimulates lunkers, polished silver and gold blades work great. Another killer color combo, especially for use in darker, stained water, is orange blades with a black trailer.

In-Line vs. Offset Spinners
Spinners for northerns come in two basic designs, and both work effectively, but each has its strengths and weaknesses.

This slideshow requires JavaScript.

In-line spinners (such as Mepps, Worden’s Lures Rooster Tails, Panther Martin, and Blue Fox’s Vibrax), with their terminal trebles, have higher hook-up and catch rates than their safety-pin brethren, but they also hook vegetation and other underwater structure, too.

But lures such as Terminators and Stanley Jigs’ Rick Clunn 4-Blade Willow Spinnerbaits, with their single, upturned hooks surrounded by manmade skirts, slither through the weeds, logs and stumps. In-lines also cast like bullets, while offsets can catch the wind and lose momentum.

Line, Leaders
Any of the new “super-lines” such as like Berkley FireLine, Spiderwire Fusion, or Remington’s Power-Lokt, are superior to monofilament for spinning pike angling. Their low stretch and high-abrasion resistance benefit pike anglers.

Flout the convention and tie on a snap/swivel instead of a leader. Leaders inhibit action and deter wary trophies, while the snap swivels provide two major benefits: quick lure changes and eliminating/reducing line twist. True, you’ll lose lures to the razor-sharp choppers of aggressive mounters, but you’ll get lots more bites without leaders!

Speed & Delivery
Often northerns will attack even jet-powered offerings, but slowing down, pausing, or herky-jerkying that spinner, especially when it reaches the “Pike Zone,” reaps big rewards. Even lazy fish will smash a spinnerbait dangled in front on their out-sized mouth.

Always cast beyond where you think the pike lurk, because while “scissorbills” are legendary for their aggressiveness, they don’t like being bombed. Landing a bait on top of one’s head will likely result in spooking it.

Spin-Crazy Times & Spots
Primetime for driving pike spin crazy depends upon the season, time of day, and prevailing weather conditions. Early spring, right after ice out, brings spawned out northern pike shoreward (where they’re most vulnerable). Spinner rigs elicit savage strikes from hungry pike during spring.

Because northerns sight-feed, mid-day piking makes sense. Following that logic, clear, blue-sky days with lots of sun create perfect pike angling weather.

The spinner’s flash and large profile, easily visible to cruising whoppers, prove irresistible.

Look for incoming streams or rivers, and concentrate your efforts just off the edges of weedy drop-offs. Weeds are the keys to spinning big pike crazy, as these predators use vegetation to ambush any aquatic creature smaller than themselves. Position the boat on the deep side of the drop-off, and cast the spinner up onto the flat itself, cranking just fast enough to keep the lure above the weeds, and pause when you get to the weed edge. Allow the bait to drift down and find the waiting lunkers, and hang on!

Using spinners to drive northern pike stir crazy is fun, easy, and productive.

Contact us for your next MONSTER PIKE Fishing Trip!

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address:

Subscribe

Name(required)

Email(required)

Comment(required)

Email Me....

Fishing Package Rates eBrochure THE OUTBACK Adventure Info Hunting Rates

Submit

Δ

 

The Weed Warrior

Whether it’s submerged weeds like cabbage, floating varieties such as lily pads, or emergent plants like reeds, bulrushes, or even flooded terrestrials, pike instinctively gravitate to vegetative cover. When conditions are right, the green zone becomes a gridiron to do battle with toothy weed beasts.

Shrewd pike anglers are adept at using lures and techniques to find and extract fish from these sorts of weed-filled areas. While you can often do well skirting the edges, at times there is no substitute for rolling up your sleeves and digging them out of the heavy stuff. It’s of little surprise then, that weedlessness is a quality shared by many top pike lures (and lure modifications) of our time.

The Johnson Silver Minnow, introduced in the 1920s, remains a consistent producer of weed pike. Northland Tackle’s new Live-Forage Weedless Spoon, with realistic baitfish-image patterns, and the Daredevle Feathered Weedless spoon, are other options of similar design.

Many have written about exchanging treble hooks for single hooks on spoons, which reduces fouling while still permitting efficient hook-sets. Vegetation that gets hung on the hook typically can be ripped free during the retrieve with a few quick snaps of the rod tip, or on a subsequent snap-cast. Add a texposed softbait trailer for more weed proofing.

This slideshow requires JavaScript.

The weedless qualities of many popular bass lures have led them to serve double-duty for pike. When Blue Fox introduced the Roland Martin series spinnerbait, fitted with a then oversized #7 blade, it was an instant favorite for big pike. Today, an expanded range of pike spinnerbaits is available, including the Lindy M&G and Northland Bionic Bucktail spinnerbaits, among many others.

Jigs built for flipping and swimming are another class of weapons for weed pike. Versions of this once exclusive bass bait are now widely available and in larger sizes crossing over to pike. In this category are the J-mac and Lil’ Hustler jigs. Northland’s Jungle Jig, tipped with a plastic trailer, is another good producer for weed pike. Oversize jigs like the J-mac also work well paired with a reaper, lizard, or swimbait, adding unique action, increasing profile, and slowing sink rate.

Anyone who has fished weedless surface frogs can attest to their effectiveness at attracting and hooking pike. While pike tend to damage the softer varieties after a catch or two, newer designs such as the SPRO Bronzeye Pop Frog and Tru Tungsten Mad Maxx are harder than most and put many pike in the boat before needing to be replaced or repaired.

Upsized hollow-bodied swimbaits are among the most recent weed-resistant tools being applied to extract pike from sloppy places. Many varieties run weedless when rigged texposed on an oversized worm hook. Try a Berkley Hollow Belly Swimbait, Yum Money Minnow, or Z-Man SwimmerZ. The Fat Minnow by Basstrix, rigged on a Mustad Ultra Lock (38105), is a personal favorite.

This slideshow requires JavaScript.

When flying north to trophy pike waters, knowledgeable anglers pack a selection of soft-plastic stickbaits and wide-gap hooks. Effective weedless alternatives when slow is key, Bait Rigs’ Reaper Tail or a 9-inch Yum Dinger can be cast easily on unweighted hooks and worked in and along weedy haunts. Where there’s room to swim in vegetation pockets or through stalks, try texposing an oversized curlytail grub, like a Kalin’s 5-inch Lunker Grub on an unweighted wide-gap hook. The seductive slow swim can be irresistible to pike holding in the greenery.

To improve the longevity of soft plastics, consider using screw locks, which can be clipped to the eye of the hook or threaded onto the hook shaft. These modifications can be applied to in-line spinners as well. For especially dense or stubborn vegetation, clip on a hook with a wireguard like the Mustad W3551, making your favorite spoon or spinner weedless.

It’s not a question of whether you’ll find pike in the weeds, but rather when. Productive people have an uncanny ability to turn challenges into opportunity. Snakes in the grass need not carry a negative connotation, providing you’re equipped with the right tools for overcoming salady situations.

48.5″ NORTHERN PIKE

Lure Classics

Snagless In-line

The Snagless Sally made by Hildebrandt is a classic for combing weeds for bass and pike. “The Snagless Sally is one of the most weedless spinner-based lures I’ve ever used,” says In-Fisherman Managing Editor Rob Neumann. “It works well through submerged weeds, but also through floating plants and emergents like lilies, reeds, and rice.” Sally features a single hook with a wire hook-guard and vinyl skirt. “You also can add a plastic or pork trailer, but that’s often not necessary,” he says. Originally available in 1/4- and 3/8-ounce sizes, the Snagless Sally lineup has been expanded to include 1/2-, 3/4-, and 1-ounce sizes, giving pike (and muskie) anglers more options.

Tackle Tip

• Pegging Plastics

Soft-plastic flukes and stickbaits like Lunker City Slug-Gos and Yum Dingers can be hot tickets to pike in weedy water. Rigged on wide-gap hook, these slow sinkers can be walked, snapped, and paused in midwater to trigger vicious strikes. In-Fisherman John Kolbeck passed along his solutions for rigging these plastics. He was fishing for pike in shallow weedy areas and around fallen timber with Slug-Gos, walking the dog about a foot under water and crawling baits over patches of dead reeds. He connected the hook to a loop in the wire leader to maximize bait action.The problem was that the lure would slide down the hook shank into the hook-bend, preventing solid hook-sets. The first attempt was to peg the lure to the eye of the hook, but this kept the lure from swinging freely on the leader loop. Kolbeck offers three solutions:1. Thread the nose of the lure onto the hook. Double over a short piece of rubber band and thread onto the hook before inserting the hook into the body of the lure. Slide the rubber band piece up past the bait-keeper bend of the hook an tight against the nose of the lure.2. Rig the lure onto the hook, being sure not to cover the hookeye. Insert a toothpick into the bait at a 90-degree angle just in front of the bait-keeper bend in the hook and trim the toothpick ends. 3.  Starting with about a 2-inch section of pipe cleaner, strip about 1/4 inch of the fuzzy material from one end. Attach the bare-wire end to the hookeye, being sure not to foul the loose leader connection. Wrap the fuzzy end of the pipe cleaner around the shank of the hook just above the bait-keeper bend. This option allows you to add a bit of color as well.

Tackle Tip

• Spoon Modification

Exchanging the treble hook for a single hook on a spoon can make it more weedless. And whatever weeds the hook picks up often can be ripped free with a few sharp snaps of the rod. Lonnie King switches out for single siwash-style hooks where single barbless hooks are mandatory, as is the case in some trophy pike waters in Canada. The Eagle Claw 84 is another good hook option.King suggests installing the hook so its point is on the concave (top) side of the spoon when retrieved. You can also rig a soft plastic trailer texposed to make it even more weedless, and for adding customized actions and profiles. To keep the trailer from slipping down the hook shank, use a clip-on screw-lock like the Tru-Turn HitchHiker ­(ttiblakemore.com), Bass Pro Shops XPS Keeper Spring (basspro.com), or Clinch Spring from First Mate Lures (firstmatelures.com).You can also add an extra split ring, extending the connection and allowing the hook to move more freely.   Use the Fastach Clip from Stringease Tackle ­(stringease.com), which extends the distance between hook and lure and makes hook changes quick and easy.

Follow our HUNTING BLOG

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address:

Subscribe

Name(required)

Email(required)

Comment(required)

Email Me....

Fishing Package Rates eBrochure THE OUTBACK Adventure Info Hunting Rates

Submit

Δ

 

Fishing Walleye When it’s Sunny

Where to Find the Walleye?

Hot, penetrating sunshine and the sensitive eyes of the walleye can make for a frustrating and energy-draining day out on the water for the enthusiastic angler. Fish become scarce during these trying times and without the proper locations or techniques needed to find and catch these fish, a fisherman can quickly get depressed.

Green, healthy weeds, a handful of jigs and a technique called “dunking” are all that are needed to find success during these “dog days” of summer.

During the days of summer when the humidity and sun become scorching hot, the intuitive walleye will begin his retreat and search for cooler climates for a more comfortable existence. Although common knowledge tells us that walleye and rocks are the perfect pair, the green vegetation that is on Wawang Lake is also a preferred habitat for a walleye seeking shelter. Shallow areas are the number one choice for patterning walleye this way, and plays host to weed-wandering walleye. Water that is relatively clear and is less than ten feet deep are the most ideal characteristics to target for certain success.

Green weeds lure walleye in for a number of reasons. They provide a cooler environment, shade from the sun, oxygen, safety and comfort and an abundant food source with an added ambush point for attack. When you put all of these pluses together, you get a sure-fire plan for putting walleye in the boat.

When the sun is beating down, there will be certain weeds and areas that will draw fish in more than others.  Look for the greenest, most lush vegetation that you can find. These weeds can take the form of coon tail, milfoil or a variety of other species, but they must have a base or openings for the walleye to lurk under and through. Also, try to pinpoint weed areas that are relatively close to deeper water. Walleye feel safer when deeper water is in the vicinity as it provides an escape route – the shallow weed flat, in turn, provides an ideal feeding shelf. One last thing to keep an eye out for is isolated weed clumps in the area you are fishing. Huge expanses of vegetation will hold good numbers of fish, but isolated weed clumps provide a hiding area in a vast space of “coverless” water that roaming fish happen to stumble upon and call home.

  
 

Dunk till you Drop
Dunking is a close-range fishing technique that involves lowering your lure vertically down from your boat into a weed pocket. The maximum amount of line you will use in most situations is ten feet, so be prepared to for some excitement when Mr. Walleye takes a fast swipe at your jig.

There are two ways to approach a weed pocket for dunking – drifting and by using your electric motor. If the winds are calm and you are fishing a large expanse of weeds, simply allow your boat to drift with the breeze and dunk all of the pockets that you can as your boat slowly drifts over them.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address:

Subscribe

Name(required)

Email(required)

Comment(required)

Email Me....

Fishing Package Rates eBrochure THE OUTBACK Adventure Info Hunting Rates

Submit

Δ

 

SPINNING FOR PIKE

The #5 Mepps’ steady throb pulsed through the 30-pound Spiderwire, down the length of the medium/heavy-action graphite rod and directly into his hand. Just as the lure reached the edge of the cabbage weeds, the blade’s thrum came to an abrupt halt.   He set the hook hard into what felt like a concrete wall!   But then the wall began to move, and he knew he was into a trophy. Five minutes later and four desperate boatside runs, he lands the 20-pound northern pike.

IT’S SIMPLE:  Big pike LOVE spinners!

Weeds are the keys to spinning big pike crazy as these predators use vegetation to ambush any aquatic creature smaller than themselves.

The Baits
Spinner choices abound, but not all are created equal when it comes to enticing jumbo “scissorbills.” The angler should select certain sizes, shapes, and colors, over others.

Lesson No. 1 in choosing spinners for Esox lucius: bigger always is better. Pick magnum-sized offerings as even hammer-handles attack huge lures with abandon, and to catch true monsters, you MUST have that big profile.

Fat, deeply cupped blades throw out big vibrations that ring the dinner bell for monster pike. While sometimes thinner shaped blades (such as willow-leafs) that spin faster turn the trick; usually the slower-turning Colorado-type blades prove to be the ticket to a pike bonanza.

Because big flash stimulates lunkers, polished silver and gold blades work great. Another killer color combo, especially for use in darker, stained water, is orange blades with a black trailer.

In-Line vs. Offset Spinners
Spinners for northerns come in two basic designs, and both work effectively, but each has its strengths and weaknesses.

This slideshow requires JavaScript.

In-line spinners (such as Mepps, Worden’s Lures Rooster Tails, Panther Martin, and Blue Fox’s Vibrax), with their terminal trebles, have higher hook-up and catch rates than their safety-pin brethren, but they also hook vegetation and other underwater structure, too.

But lures such as Terminators and Stanley Jigs’ Rick Clunn 4-Blade Willow Spinnerbaits, with their single, upturned hooks surrounded by manmade skirts, slither through the weeds, logs and stumps. In-lines also cast like bullets, while offsets can catch the wind and lose momentum.

Line, Leaders
Any of the new “super-lines” such as like Berkley FireLine, Spiderwire Fusion, or Remington’s Power-Lokt, are superior to monofilament for spinning pike angling. Their low stretch and high-abrasion resistance benefit pike anglers.

Flout the convention and tie on a snap/swivel instead of a leader. Leaders inhibit action and deter wary trophies, while the snap swivels provide two major benefits: quick lure changes and eliminating/reducing line twist. True, you’ll lose lures to the razor-sharp choppers of aggressive mounters, but you’ll get lots more bites without leaders!

Speed & Delivery
Often northerns will attack even jet-powered offerings, but slowing down, pausing, or herky-jerkying that spinner, especially when it reaches the “Pike Zone,” reaps big rewards. Even lazy fish will smash a spinnerbait dangled in front on their out-sized mouth.

Always cast beyond where you think the pike lurk, because while “scissorbills” are legendary for their aggressiveness, they don’t like being bombed. Landing a bait on top of one’s head will likely result in spooking it.

Spin-Crazy Times & Spots
Primetime for driving pike spin crazy depends upon the season, time of day, and prevailing weather conditions. Early spring, right after ice out, brings spawned out northern pike shoreward (where they’re most vulnerable). Spinner rigs elicit savage strikes from hungry pike during spring.

Because northerns sight-feed, mid-day piking makes sense. Following that logic, clear, blue-sky days with lots of sun create perfect pike angling weather.

The spinner’s flash and large profile, easily visible to cruising whoppers, prove irresistible.

Look for incoming streams or rivers, and concentrate your efforts just off the edges of weedy drop-offs. Weeds are the keys to spinning big pike crazy, as these predators use vegetation to ambush any aquatic creature smaller than themselves. Position the boat on the deep side of the drop-off, and cast the spinner up onto the flat itself, cranking just fast enough to keep the lure above the weeds, and pause when you get to the weed edge. Allow the bait to drift down and find the waiting lunkers, and hang on!

Using spinners to drive northern pike stir crazy is fun, easy, and productive.

Contact us for your next MONSTER PIKE Fishing Trip!

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address:

Subscribe

Name(required)

Email(required)

Comment(required)

Email Me....

Fishing Package Rates eBrochure THE OUTBACK Adventure Info Hunting Rates

Submit

Δ

 

The Weed Warrior

Whether it’s submerged weeds like cabbage, floating varieties such as lily pads, or emergent plants like reeds, bulrushes, or even flooded terrestrials, pike instinctively gravitate to vegetative cover. When conditions are right, the green zone becomes a gridiron to do battle with toothy weed beasts.

Shrewd pike anglers are adept at using lures and techniques to find and extract fish from these sorts of weed-filled areas. While you can often do well skirting the edges, at times there is no substitute for rolling up your sleeves and digging them out of the heavy stuff. It’s of little surprise then, that weedlessness is a quality shared by many top pike lures (and lure modifications) of our time.

The Johnson Silver Minnow, introduced in the 1920s, remains a consistent producer of weed pike. Northland Tackle’s new Live-Forage Weedless Spoon, with realistic baitfish-image patterns, and the Daredevle Feathered Weedless spoon, are other options of similar design.

Many have written about exchanging treble hooks for single hooks on spoons, which reduces fouling while still permitting efficient hook-sets. Vegetation that gets hung on the hook typically can be ripped free during the retrieve with a few quick snaps of the rod tip, or on a subsequent snap-cast. Add a texposed softbait trailer for more weed proofing.

This slideshow requires JavaScript.

The weedless qualities of many popular bass lures have led them to serve double-duty for pike. When Blue Fox introduced the Roland Martin series spinnerbait, fitted with a then oversized #7 blade, it was an instant favorite for big pike. Today, an expanded range of pike spinnerbaits is available, including the Lindy M&G and Northland Bionic Bucktail spinnerbaits, among many others.

Jigs built for flipping and swimming are another class of weapons for weed pike. Versions of this once exclusive bass bait are now widely available and in larger sizes crossing over to pike. In this category are the J-mac and Lil’ Hustler jigs. Northland’s Jungle Jig, tipped with a plastic trailer, is another good producer for weed pike. Oversize jigs like the J-mac also work well paired with a reaper, lizard, or swimbait, adding unique action, increasing profile, and slowing sink rate.

Anyone who has fished weedless surface frogs can attest to their effectiveness at attracting and hooking pike. While pike tend to damage the softer varieties after a catch or two, newer designs such as the SPRO Bronzeye Pop Frog and Tru Tungsten Mad Maxx are harder than most and put many pike in the boat before needing to be replaced or repaired.

Upsized hollow-bodied swimbaits are among the most recent weed-resistant tools being applied to extract pike from sloppy places. Many varieties run weedless when rigged texposed on an oversized worm hook. Try a Berkley Hollow Belly Swimbait, Yum Money Minnow, or Z-Man SwimmerZ. The Fat Minnow by Basstrix, rigged on a Mustad Ultra Lock (38105), is a personal favorite.

This slideshow requires JavaScript.

When flying north to trophy pike waters, knowledgeable anglers pack a selection of soft-plastic stickbaits and wide-gap hooks. Effective weedless alternatives when slow is key, Bait Rigs’ Reaper Tail or a 9-inch Yum Dinger can be cast easily on unweighted hooks and worked in and along weedy haunts. Where there’s room to swim in vegetation pockets or through stalks, try texposing an oversized curlytail grub, like a Kalin’s 5-inch Lunker Grub on an unweighted wide-gap hook. The seductive slow swim can be irresistible to pike holding in the greenery.

To improve the longevity of soft plastics, consider using screw locks, which can be clipped to the eye of the hook or threaded onto the hook shaft. These modifications can be applied to in-line spinners as well. For especially dense or stubborn vegetation, clip on a hook with a wireguard like the Mustad W3551, making your favorite spoon or spinner weedless.

It’s not a question of whether you’ll find pike in the weeds, but rather when. Productive people have an uncanny ability to turn challenges into opportunity. Snakes in the grass need not carry a negative connotation, providing you’re equipped with the right tools for overcoming salady situations.

Lure Classics

Snagless In-line

The Snagless Sally made by Hildebrandt is a classic for combing weeds for bass and pike. “The Snagless Sally is one of the most weedless spinner-based lures I’ve ever used,” says In-Fisherman Managing Editor Rob Neumann. “It works well through submerged weeds, but also through floating plants and emergents like lilies, reeds, and rice.” Sally features a single hook with a wire hook-guard and vinyl skirt. “You also can add a plastic or pork trailer, but that’s often not necessary,” he says. Originally available in 1/4- and 3/8-ounce sizes, the Snagless Sally lineup has been expanded to include 1/2-, 3/4-, and 1-ounce sizes, giving pike (and muskie) anglers more options.

Tackle Tip

• Pegging Plastics

Soft-plastic flukes and stickbaits like Lunker City Slug-Gos and Yum Dingers can be hot tickets to pike in weedy water. Rigged on wide-gap hook, these slow sinkers can be walked, snapped, and paused in midwater to trigger vicious strikes. In-Fisherman John Kolbeck passed along his solutions for rigging these plastics. He was fishing for pike in shallow weedy areas and around fallen timber with Slug-Gos, walking the dog about a foot under water and crawling baits over patches of dead reeds. He connected the hook to a loop in the wire leader to maximize bait action.The problem was that the lure would slide down the hook shank into the hook-bend, preventing solid hook-sets. The first attempt was to peg the lure to the eye of the hook, but this kept the lure from swinging freely on the leader loop. Kolbeck offers three solutions:1. Thread the nose of the lure onto the hook. Double over a short piece of rubber band and thread onto the hook before inserting the hook into the body of the lure. Slide the rubber band piece up past the bait-keeper bend of the hook an tight against the nose of the lure.2. Rig the lure onto the hook, being sure not to cover the hookeye. Insert a toothpick into the bait at a 90-degree angle just in front of the bait-keeper bend in the hook and trim the toothpick ends. 3.  Starting with about a 2-inch section of pipe cleaner, strip about 1/4 inch of the fuzzy material from one end. Attach the bare-wire end to the hookeye, being sure not to foul the loose leader connection. Wrap the fuzzy end of the pipe cleaner around the shank of the hook just above the bait-keeper bend. This option allows you to add a bit of color as well.

Tackle Tip

• Spoon Modification

Exchanging the treble hook for a single hook on a spoon can make it more weedless. And whatever weeds the hook picks up often can be ripped free with a few sharp snaps of the rod. Lonnie King switches out for single siwash-style hooks where single barbless hooks are mandatory, as is the case in some trophy pike waters in Canada. The Eagle Claw 84 is another good hook option.King suggests installing the hook so its point is on the concave (top) side of the spoon when retrieved. You can also rig a soft plastic trailer texposed to make it even more weedless, and for adding customized actions and profiles. To keep the trailer from slipping down the hook shank, use a clip-on screw-lock like the Tru-Turn HitchHiker ­(ttiblakemore.com), Bass Pro Shops XPS Keeper Spring (basspro.com), or Clinch Spring from First Mate Lures (firstmatelures.com).You can also add an extra split ring, extending the connection and allowing the hook to move more freely.   Use the Fastach Clip from Stringease Tackle ­(stringease.com), which extends the distance between hook and lure and makes hook changes quick and easy.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address:

Subscribe

Name(required)

Email(required)

Comment(required)

Email Me....

Fishing Package Rates eBrochure THE OUTBACK Adventure Info Hunting Rates

Submit

Δ

 

Fishing Walleye When It’s Sunny

 Where to Find the Walleye?

Hot, penetrating sunshine and the sensitive eyes of the walleye can make for a frustrating and energy-draining day out on the water for the enthusiastic angler. Fish become scarce during these trying times and without the proper locations or techniques needed to find and catch these fish, a fisherman can quickly get depressed.

Green, healthy weeds, a handful of jigs and a technique called “dunking” are all that are needed to find success during these “dog days” of summer.

During the days of summer when the humidity and sun become scorching hot, the intuitive walleye will begin his retreat and search for cooler climates for a more comfortable existence. Although common knowledge tells us that walleye and rocks are the perfect pair, the green vegetation that is on Wawang Lake is also a preferred habitat for a walleye seeking shelter. Shallow areas are the number one choice for patterning walleye this way, and plays host to weed-wandering walleye. Water that is relatively clear and is less than ten feet deep are the most ideal characteristics to target for certain success.

 

Green weeds lure walleye in for a number of reasons. They provide a cooler environment, shade from the sun, oxygen, safety and comfort and an abundant food source with an added ambush point for attack. When you put all of these pluses together, you get a sure-fire plan for putting walleye in the boat.

When the sun is beating down, there will be certain weeds and areas that will draw fish in more than others.  Look for the greenest, most lush vegetation that you can find. These weeds can take the form of coon tail, milfoil or a variety of other species, but they must have a base or openings for the walleye to lurk under and through. Also, try to pinpoint weed areas that are relatively close to deeper water. Walleye feel safer when deeper water is in the vicinity as it provides an escape route – the shallow weed flat, in turn, provides an ideal feeding shelf. One last thing to keep an eye out for is isolated weed clumps in the area you are fishing. Huge expanses of vegetation will hold good numbers of fish, but isolated weed clumps provide a hiding area in a vast space of “coverless” water that roaming fish happen to stumble upon and call home.

  
 

Dunk till you Drop
Dunking is a close-range fishing technique that involves lowering your lure vertically down from your boat into a weed pocket. The maximum amount of line you will use in most situations is ten feet, so be prepared to for some excitement when Mr. Walleye takes a fast swipe at your jig.

There are two ways to approach a weed pocket for dunking – drifting and by using your electric motor. If the winds are calm and you are fishing a large expanse of weeds, simply allow your boat to drift with the breeze and dunk all of the pockets that you can as your boat slowly drifts over them.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address:

Subscribe

Name(required)

Email(required)

Comment(required)

Email Me....

Fishing Package Rates eBrochure THE OUTBACK Adventure Info Hunting Rates

Submit

Δ

 

Fishing Walleye When it’s Sunny

Where to Find the Walleye?

Hot, penetrating sunshine and the sensitive eyes of the walleye can make for a frustrating and energy-draining day out on the water for the enthusiastic angler. Fish become scarce during these trying times and without the proper locations or techniques needed to find and catch these fish, a fisherman can quickly get depressed.

Green, healthy weeds, a handful of jigs and a technique called “dunking” are all that are needed to find success during these “dog days” of summer.

During the days of summer when the humidity and sun become scorching hot, the intuitive walleye will begin his retreat and search for cooler climates for a more comfortable existence. Although common knowledge tells us that walleye and rocks are the perfect pair, the green vegetation that is on Wawang Lake is also a preferred habitat for a walleye seeking shelter. Shallow areas are the number one choice for patterning walleye this way, and plays host to weed-wandering walleye. Water that is relatively clear and is less than ten feet deep are the most ideal characteristics to target for certain success.

Green weeds lure walleye in for a number of reasons. They provide a cooler environment, shade from the sun, oxygen, safety and comfort and an abundant food source with an added ambush point for attack. When you put all of these pluses together, you get a sure-fire plan for putting walleye in the boat.

When the sun is beating down, there will be certain weeds and areas that will draw fish in more than others.  Look for the greenest, most lush vegetation that you can find. These weeds can take the form of coon tail, milfoil or a variety of other species, but they must have a base or openings for the walleye to lurk under and through. Also, try to pinpoint weed areas that are relatively close to deeper water. Walleye feel safer when deeper water is in the vicinity as it provides an escape route – the shallow weed flat, in turn, provides an ideal feeding shelf. One last thing to keep an eye out for is isolated weed clumps in the area you are fishing. Huge expanses of vegetation will hold good numbers of fish, but isolated weed clumps provide a hiding area in a vast space of “coverless” water that roaming fish happen to stumble upon and call home.

  
 

Dunk till you Drop
Dunking is a close-range fishing technique that involves lowering your lure vertically down from your boat into a weed pocket. The maximum amount of line you will use in most situations is ten feet, so be prepared to for some excitement when Mr. Walleye takes a fast swipe at your jig.

There are two ways to approach a weed pocket for dunking – drifting and by using your electric motor. If the winds are calm and you are fishing a large expanse of weeds, simply allow your boat to drift with the breeze and dunk all of the pockets that you can as your boat slowly drifts over them.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address:

Subscribe

Name(required)

Email(required)

Comment(required)

Email Me....

Fishing Package Rates eBrochure THE OUTBACK Adventure Info Hunting Rates

Submit

Δ

 

SPINNING FOR PIKE

The #5 Mepps’ steady throb pulsed through the 30-pound Spiderwire, down the length of the medium/heavy-action graphite rod and directly into his hand. Just as the lure reached the edge of the cabbage weeds, the blade’s thrum came to an abrupt halt.   He set the hook hard into what felt like a concrete wall!   But then the wall began to move, and he knew he was into a trophy. Five minutes later and four desperate boatside runs, he lands the 20-pound northern pike.

IT’S SIMPLE:  Big pike LOVE spinners!

Weeds are the keys to spinning big pike crazy as these predators use vegetation to ambush any aquatic creature smaller than themselves.

The Baits
Spinner choices abound, but not all are created equal when it comes to enticing jumbo “scissorbills.” The angler should select certain sizes, shapes, and colors, over others.

Lesson No. 1 in choosing spinners for Esox lucius: bigger always is better. Pick magnum-sized offerings as even hammer-handles attack huge lures with abandon, and to catch true monsters, you MUST have that big profile.

Fat, deeply cupped blades throw out big vibrations that ring the dinner bell for monster pike. While sometimes thinner shaped blades (such as willow-leafs) that spin faster turn the trick; usually the slower-turning Colorado-type blades prove to be the ticket to a pike bonanza.

Because big flash stimulates lunkers, polished silver and gold blades work great. Another killer color combo, especially for use in darker, stained water, is orange blades with a black trailer.

In-Line vs. Offset Spinners
Spinners for northerns come in two basic designs, and both work effectively, but each has its strengths and weaknesses.

This slideshow requires JavaScript.

In-line spinners (such as Mepps, Worden’s Lures Rooster Tails, Panther Martin, and Blue Fox’s Vibrax), with their terminal trebles, have higher hook-up and catch rates than their safety-pin brethren, but they also hook vegetation and other underwater structure, too.

But lures such as Terminators and Stanley Jigs’ Rick Clunn 4-Blade Willow Spinnerbaits, with their single, upturned hooks surrounded by manmade skirts, slither through the weeds, logs and stumps. In-lines also cast like bullets, while offsets can catch the wind and lose momentum.

Line, Leaders
Any of the new “super-lines” such as like Berkley FireLine, Spiderwire Fusion, or Remington’s Power-Lokt, are superior to monofilament for spinning pike angling. Their low stretch and high-abrasion resistance benefit pike anglers.

Flout the convention and tie on a snap/swivel instead of a leader. Leaders inhibit action and deter wary trophies, while the snap swivels provide two major benefits: quick lure changes and eliminating/reducing line twist. True, you’ll lose lures to the razor-sharp choppers of aggressive mounters, but you’ll get lots more bites without leaders!

Speed & Delivery
Often northerns will attack even jet-powered offerings, but slowing down, pausing, or herky-jerkying that spinner, especially when it reaches the “Pike Zone,” reaps big rewards. Even lazy fish will smash a spinnerbait dangled in front on their out-sized mouth.

Always cast beyond where you think the pike lurk, because while “scissorbills” are legendary for their aggressiveness, they don’t like being bombed. Landing a bait on top of one’s head will likely result in spooking it.

Spin-Crazy Times & Spots
Primetime for driving pike spin crazy depends upon the season, time of day, and prevailing weather conditions. Early spring, right after ice out, brings spawned out northern pike shoreward (where they’re most vulnerable). Spinner rigs elicit savage strikes from hungry pike during spring.

Because northerns sight-feed, mid-day piking makes sense. Following that logic, clear, blue-sky days with lots of sun create perfect pike angling weather.

The spinner’s flash and large profile, easily visible to cruising whoppers, prove irresistible.

Look for incoming streams or rivers, and concentrate your efforts just off the edges of weedy drop-offs. Weeds are the keys to spinning big pike crazy, as these predators use vegetation to ambush any aquatic creature smaller than themselves. Position the boat on the deep side of the drop-off, and cast the spinner up onto the flat itself, cranking just fast enough to keep the lure above the weeds, and pause when you get to the weed edge. Allow the bait to drift down and find the waiting lunkers, and hang on!

Using spinners to drive northern pike stir crazy is fun, easy, and productive.

Contact us for your next MONSTER PIKE Fishing Trip!

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
BROCHURE    HUNT BOOKLET

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address:

Subscribe

Name(required)

Email(required)

Comment(required)

Email Me....

Fishing Package Rates eBrochure THE OUTBACK Adventure Info Hunting Rates

Submit

Δ

 

The Weed Warrior

Whether it’s submerged weeds like cabbage, floating varieties such as lily pads, or emergent plants like reeds, bulrushes, or even flooded terrestrials, pike instinctively gravitate to vegetative cover. When conditions are right, the green zone becomes a gridiron to do battle with toothy weed beasts.

Shrewd pike anglers are adept at using lures and techniques to find and extract fish from these sorts of weed-filled areas. While you can often do well skirting the edges, at times there is no substitute for rolling up your sleeves and digging them out of the heavy stuff. It’s of little surprise then, that weedlessness is a quality shared by many top pike lures (and lure modifications) of our time.

The Johnson Silver Minnow, introduced in the 1920s, remains a consistent producer of weed pike. Northland Tackle’s new Live-Forage Weedless Spoon, with realistic baitfish-image patterns, and the Daredevle Feathered Weedless spoon, are other options of similar design.

Many have written about exchanging treble hooks for single hooks on spoons, which reduces fouling while still permitting efficient hook-sets. Vegetation that gets hung on the hook typically can be ripped free during the retrieve with a few quick snaps of the rod tip, or on a subsequent snap-cast. Add a texposed softbait trailer for more weed proofing.

This slideshow requires JavaScript.

The weedless qualities of many popular bass lures have led them to serve double-duty for pike. When Blue Fox introduced the Roland Martin series spinnerbait, fitted with a then oversized #7 blade, it was an instant favorite for big pike. Today, an expanded range of pike spinnerbaits is available, including the Lindy M&G and Northland Bionic Bucktail spinnerbaits, among many others.

Jigs built for flipping and swimming are another class of weapons for weed pike. Versions of this once exclusive bass bait are now widely available and in larger sizes crossing over to pike. In this category are the J-mac and Lil’ Hustler jigs. Northland’s Jungle Jig, tipped with a plastic trailer, is another good producer for weed pike. Oversize jigs like the J-mac also work well paired with a reaper, lizard, or swimbait, adding unique action, increasing profile, and slowing sink rate.

Anyone who has fished weedless surface frogs can attest to their effectiveness at attracting and hooking pike. While pike tend to damage the softer varieties after a catch or two, newer designs such as the SPRO Bronzeye Pop Frog and Tru Tungsten Mad Maxx are harder than most and put many pike in the boat before needing to be replaced or repaired.

Upsized hollow-bodied swimbaits are among the most recent weed-resistant tools being applied to extract pike from sloppy places. Many varieties run weedless when rigged texposed on an oversized worm hook. Try a Berkley Hollow Belly Swimbait, Yum Money Minnow, or Z-Man SwimmerZ. The Fat Minnow by Basstrix, rigged on a Mustad Ultra Lock (38105), is a personal favorite.

This slideshow requires JavaScript.

When flying north to trophy pike waters, knowledgeable anglers pack a selection of soft-plastic stickbaits and wide-gap hooks. Effective weedless alternatives when slow is key, Bait Rigs’ Reaper Tail or a 9-inch Yum Dinger can be cast easily on unweighted hooks and worked in and along weedy haunts. Where there’s room to swim in vegetation pockets or through stalks, try texposing an oversized curlytail grub, like a Kalin’s 5-inch Lunker Grub on an unweighted wide-gap hook. The seductive slow swim can be irresistible to pike holding in the greenery.

To improve the longevity of soft plastics, consider using screw locks, which can be clipped to the eye of the hook or threaded onto the hook shaft. These modifications can be applied to in-line spinners as well. For especially dense or stubborn vegetation, clip on a hook with a wireguard like the Mustad W3551, making your favorite spoon or spinner weedless.

It’s not a question of whether you’ll find pike in the weeds, but rather when. Productive people have an uncanny ability to turn challenges into opportunity. Snakes in the grass need not carry a negative connotation, providing you’re equipped with the right tools for overcoming salady situations.

48.5″ NORTHERN PIKE

Lure Classics

Snagless In-line

The Snagless Sally made by Hildebrandt is a classic for combing weeds for bass and pike. “The Snagless Sally is one of the most weedless spinner-based lures I’ve ever used,” says In-Fisherman Managing Editor Rob Neumann. “It works well through submerged weeds, but also through floating plants and emergents like lilies, reeds, and rice.” Sally features a single hook with a wire hook-guard and vinyl skirt. “You also can add a plastic or pork trailer, but that’s often not necessary,” he says. Originally available in 1/4- and 3/8-ounce sizes, the Snagless Sally lineup has been expanded to include 1/2-, 3/4-, and 1-ounce sizes, giving pike (and muskie) anglers more options.

Tackle Tip

• Pegging Plastics

Soft-plastic flukes and stickbaits like Lunker City Slug-Gos and Yum Dingers can be hot tickets to pike in weedy water. Rigged on wide-gap hook, these slow sinkers can be walked, snapped, and paused in midwater to trigger vicious strikes. In-Fisherman John Kolbeck passed along his solutions for rigging these plastics. He was fishing for pike in shallow weedy areas and around fallen timber with Slug-Gos, walking the dog about a foot under water and crawling baits over patches of dead reeds. He connected the hook to a loop in the wire leader to maximize bait action.The problem was that the lure would slide down the hook shank into the hook-bend, preventing solid hook-sets. The first attempt was to peg the lure to the eye of the hook, but this kept the lure from swinging freely on the leader loop. Kolbeck offers three solutions:1. Thread the nose of the lure onto the hook. Double over a short piece of rubber band and thread onto the hook before inserting the hook into the body of the lure. Slide the rubber band piece up past the bait-keeper bend of the hook an tight against the nose of the lure.2. Rig the lure onto the hook, being sure not to cover the hookeye. Insert a toothpick into the bait at a 90-degree angle just in front of the bait-keeper bend in the hook and trim the toothpick ends. 3.  Starting with about a 2-inch section of pipe cleaner, strip about 1/4 inch of the fuzzy material from one end. Attach the bare-wire end to the hookeye, being sure not to foul the loose leader connection. Wrap the fuzzy end of the pipe cleaner around the shank of the hook just above the bait-keeper bend. This option allows you to add a bit of color as well.

Tackle Tip

• Spoon Modification

Exchanging the treble hook for a single hook on a spoon can make it more weedless. And whatever weeds the hook picks up often can be ripped free with a few sharp snaps of the rod. Lonnie King switches out for single siwash-style hooks where single barbless hooks are mandatory, as is the case in some trophy pike waters in Canada. The Eagle Claw 84 is another good hook option.King suggests installing the hook so its point is on the concave (top) side of the spoon when retrieved. You can also rig a soft plastic trailer texposed to make it even more weedless, and for adding customized actions and profiles. To keep the trailer from slipping down the hook shank, use a clip-on screw-lock like the Tru-Turn HitchHiker ­(ttiblakemore.com), Bass Pro Shops XPS Keeper Spring (basspro.com), or Clinch Spring from First Mate Lures (firstmatelures.com).You can also add an extra split ring, extending the connection and allowing the hook to move more freely.   Use the Fastach Clip from Stringease Tackle ­(stringease.com), which extends the distance between hook and lure and makes hook changes quick and easy.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address:

Subscribe

Name(required)

Email(required)

Comment(required)

Email Me....

Fishing Package Rates eBrochure THE OUTBACK Adventure Info Hunting Rates

Submit

Δ

 

Jigging Up Walleye

Walleyes are much harder to pattern in fall than in summer because most lakes stratify during the summer months, forming distinct temperature layers. The shallow water is usually too warm for walleyes and the deep water often lacks sufficient oxygen, so the walleyes hang out in the middle, where optimum temperature and oxygen levels exist. But that all changes in fall, when the temperature of the shallows drops to that of the depths and the entire lake circulates, resulting in adequate oxygen from top to bottom. Now the fish can go anywhere they want to find a meal.

On lakes with low water clarity, you can find fall walleyes only a few feet deep. At the same time, walleyes in a clear lake might be 40 feet deep or more.   No matter the depth, late summer and fall jigging can produce some of the year’s best walleye fishing, especially for trophy-caliber fish. Here’s a quick rundown of the equipment and techniques needed for success in both shallow and deep water.

Shallow-Water Jigging
Fall walleyes are in the shallows for only one reason: to eat. When you find them shallow, they’re aggressive and will often respond better to an intense jigging action than to a subtle one. That’s why rip-jigging (also known as snap-jigging) works so well.

WORK IT RIGHT: When rip-jigging, you work the jig with sharp jerks and then throw slack into the line so the jig plummets. The jig never hits bottom, however, because you make another jerk just before it touches.

Most rip-jigging is done as you slowly troll at about 1 mph, but you can also do it while drifting or still-fishing.

With a little practice, you’ll discover how hard to rip and how long to pause after throwing slack, so that you

keep the jig moving erratically while almost, but not quite, touching bottom. The most difficult aspect of rip-jigging is getting used to the fact that you might not feel the usual tap or twitch that signals a bite because of the slack in the line. It doesn’t really matter, though, because you’ll set the hook with the next rip.

Like any other fishing presentation, rip-jigging doesn’t work all the time. There will be days when the fish are in a less aggressive mood and prefer a slower, more subtle jigging action. Experiment with different motions and let the fish tell you what they want.

When the walleye are fussy, slowly drop your rod tip and let the jig fall back to the bottom and rest for a second or two. To catch these picky fish, I like to tip my jig with live bait, usually a minnow when the water is cold (less than 50º F or 10ºC), a leech when it’s tepid (52ºF to 68ºF or 11ºC to 20ºC) and half a crawler when it’s hot (warmer than 68ºF or 20ºC). But that rule is meant to be broken-bring all three baits and let the fish decide what they want to eat.

GEAR: To snap the jig with minimal effort and take up slack line when setting the hook, you’ll need a fairly long rod. A 7-foot, fast-tip spinning outfit is ideal. Spool up with an abrasion-resistant line such as 8- to 10-pound-test Trilene XT. Lighter or softer line won’t stand up to the sharp ripping action. Even tough line might fray from abrasion on the guides, so it pays to check your line often and respool when necessary. Because you’re usually fishing depths of 10 feet or less, a 1/8-ounce jig should be sufficient, but if there’s a strong wind or heavy current, you might have to step up to a 1/4-ounce jig. Tip the jig with a 3- to 4-inch minnow and hook it through the mouth and out the top of the head.

Deepwater Jigging
Once the lake de-stratifies and surface temperatures drop to around 50 degrees, baitfish will head to the warmth of deeper water, and walleyes will follow. In gin-clear lakes, you might find them as deep as 70 feet, but 30 to 45 feet is normal. Any kind of structure with a firm, rocky bottom might hold walleyes in late fall, but big, rocky main-lake humps offer your best fishing.

WORK IT RIGHT:  Rarely are walleyes super-aggressive in cold water, so a slow jigging presentation works best. A jig-minnow combo fished with short 2- to 4-inch hops will usually do the trick, but there are times when a slow drag with no hopping action is better.

Many anglers make the mistake of using a jig that’s too heavy. They’ll tie on a 3/4- to 1-ounce jig, thinking they need that much weight to get down in the deep water. But a heavy jig sinks too fast, resulting in fewer strikes. The idea is to use the lightest jig you can, taking into consideration water depth and wind conditions.

In calm weather, a 1/4-ounce jig will easily get down to 35 feet, but on a windy day you’ll have to add another 1/8 to 1/4 ounce to stay down. When fishing deep water, it’s important to keep your line vertical. If you’re dragging too much line, you won’t feel the strikes.

GEAR:   A sensitive rod is a must for jigging deep water walleyes. I use a G.Loomis GLX 722, which has the extra-fast action necessary to detect the slight nudge that often signals a deep water walleye bite. Mono simply has too much stretch for fishing this deep; use no-stretch line, like 6- to 10-pound-test Fire line, to help you detect light bites and get a firm hook set. Splice on 10 feet of mono or fluorocarbon leader to reduce line visibility and dampen the sharp jigging action that you get with no-stretch line. Late-fall walleyes generally hold in tight schools and don’t move much, so once you find a pod of fish, chances are they’ll hang around that area through the rest of the fall.

Follow our HUNTING BLOG

WEB   RATES     FISH    HUNT    CABINS    PHOTOS
TESTIMONIALS    BROCHURE    HUNT BOOKLET

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address:

Subscribe

Name(required)

Email(required)

Comment(required)

Email Me....

Fishing Package Rates eBrochure THE OUTBACK Adventure Info Hunting Rates

Submit

Δ